A.O. Smith 3/4 HP Round Flange 56J Dual Speed Full Rate Motor - STS1072RV1

$312.99

IN STOCK
FREE SHIPPING

Part # STS1072RV1

By Century Motors


Details

Top

Part # STS1072RV1

Alternate Part #'s 109130, 177099, 177100, 177103, 177104, 190065, 190095, 190130, 190146, C1110, C48K2N131, C48K2N133, C48K2N134B1, C48K2N135, C48K2N139, C48K2N144, EB973H, JH75FL2, K48A73A01, STS1072R

Product Description

A.O. Smith 3/4 HP Round Flange 56J Dual Speed Full Rate Motor - STS1072RV1

**NOTE THIS MOTOR IS SHIPPED LESS HI-LO SWITCH. YOU MAY PURCHASE THE HI-LO SWITCH SEPARATELY BY ORDERING PART # 1011431-001.**

Top

?     Asked on 1/19/2012 by Guest

I'm trying to replace the motor on my pool pump but all these numbers and abbreviations on the motor label are really confusing me. What do they mean?
 Reply

A  Answered on 1/19/2012 by InyoPools Product Specialist Patrick P.

Replacing a pool pump motor is not as difficult as it seems. You can try looking here. If you need help figuring out what the information on your label means. If you are still having difficulty figuring it out you can call us at our toll free number or you can send us a photo of your motor label here.
 Reply


?     Asked on 1/18/2012 by Guest

How can I tell whether or not my motor is a dual or single speed?
 Reply

A  Answered on 1/18/2012 by InyoPools Product Specialist Patrick P.

Most dual speed motors will have a toggle switch that will allow you to adjust the motor speed to either high or low. Another way to tell if your motor is dual speed is by looking at the RPM's on the motor specifications label. If there are two RPM's listed such as: 1725/3450 then motor is dual speed. If there is only one RPM, then motor is single speed.
 Reply


?     Asked on 1/18/2012 by Guest

Can you direct me to the proper hi low switch for this motor?
 Reply

A  Answered on 1/18/2012 by InyoPools Product Specialist Patrick P.

Unfortunately the manufacturer does not offer the switch for the 2 speed 220v motors any longer. If you already have a 220 volt timer (on/off) you would need an Intermatic T106R to switch from high to low speed. If you do not have a timer currently you would need the T10604R which is a 220v on/off timer and a high/low timer.
 Reply


Top

Review Summary

 (Average 0  out of 5 stars)
0 Rating
5 star:
 
(0)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)