Model # NL108
Alternate Part #'s 1382480
Throw out those old, worn out coping strips and replace them with new ones. These plastic, non-corrosive clips hold your liner in place on the pool wall before re-installing the top rail. Brand new coping strips will help insure a firm, proper liner installation.
I am considering replacing my current pool with the Wilbar Reprieve round pool and the Liberty Beaded Liner. What other parts will I need to order to install the liner? Also, am I correct that a skimmer is included with this pool?
Reply
Hi, Cyndi. You will need to purchase the Bead Receiver Kit - NL109 in order to install a beaded liner. The skimmer is included with the pool.
Reply
I have a 16x32 rectangular fantsea pool. Is it coping strips or bead receiver strips that I need for this pool with a beaded liner? The bead recievers I see on line look like they are for metal round pools. Thanks for any help.
Reply
Susan, if you have a beaded liner, you will need bead receiver. Please note that there are liners with different beads. You will need to order the correct one based on the beaded liner that you have.
Reply
i bought a 15x30x52" oval second hand and i believe the previous liner was possibly a v bead liner and i recently purchased an overlap liner the metal strips i have to go on top of the pool wall to help hold it in place are round with a slot in them was wanting to know if the coping strips that belong on an overlap liner will fit into these metal strip or do i need to purchase new pieces
Reply
Hi, Steve. This Liner Coping Strips can be used with an overlap liner depending on the make and model of the pool. These coping are consider standard coping but some model pool uses special coping strips.
Reply
On these coping strips are they as big (long)as the pic looks and will they replace the small white(clear) original ones that come on my pool I don't know the brand of pool because I bought second hand it is a 24x52 with overlap liner which I plan on buying from u also I just need to know if these coping strips will work the same and the length.the the old ones probably are 1/2 inch long on each side I'll try to get pics of pool to u as soon as possible
Reply
Hi, Justin. The NL108 copings are standard coping strips. If you can provide photos of the coping strip you have we can confirm if these will work. You can send photos to upload@inyopools.com.
Reply
I have a rectangles pool that has an 1/8" aluminum wall and 25 mil liner will this product work for me or is there a better choice?
Reply
In order to ensure we get you the right parts, can you please email us a picture of the outside pool wall (top and bottom)? As well as a picture of where the top rail meets the upright?
Reply
Does these coupings fit an Atlantis 12x24 grey wall pool 11 years old.
Reply
Hi, Hector. You will need 16 of the 47" Round Coping For Atlantic Pools - NBP2001 for your pool.
Reply
I have a 12x24 Atlantic pool purchased in2002. My question is the liner is completely faded out is there still a warranty on the liner.and is it an overlap or beaded.
Reply
Hi, The warranty does not cover fading just manufacture defects (seam separation) of the liner and I can't say what style of liner it is. You can send us photos of how the liner is connected to the pool and I can tell you what style it is.
Reply
Will these fit an Outback 27' ?
Reply
Hello Brandon, the NL108 Liner Coping strips will fit the Trendium made Outback pool series. For a 27 foot round pool, you will require a set of 44 strips.
Reply
I have a 30 ft round pool . Is the 7.99 per pack of 10 or is it an each price. Your guide states I need 47 strips but I'm not sure if I need to order 5 10 packs or put 47 in the quantity. Thank you
Reply
The price woudl be for a 10 pack, so you would need to purchase 5 10 packs which would give you a total of 50 coping strips. You will have 3 left over in case you need them down the road.
Reply
The Most Helpful Review
2 0
(5 out of 5 stars) coping strips
Reviewed By: Patrick K. from Ronceverte, WV ()
Pros: Did the job at a reasonable cost.
Cons: none
If building your own pool kit or replacing a liner these are a good bet. They worked well and were appropriately flexible, much better than the 5-6 year old ones they were replacing.
Was this review helpful to you?
The Most Recent Reviews
1 0
(5 out of 5 stars) Perfect and inexpensive replacement
Reviewed By: ()
These are great replacements for the top edge, over-the-liner, for metal pools. Note that you may need to shorten the last piece you install, which can be done with any good blade.
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: ()
Worked well.
Was this review helpful to you?
(5 out of 5 stars) Easy peasy
Reviewed By: ()
This was the easiest installation I have ever done. Super easy to work with.
Was this review helpful to you?
(5 out of 5 stars) Thanks inyopools
Reviewed By: Georgine N. ()
absolutely love inyopools...I wish I would of known about you before I purchased my pool at pool city.
Was this review helpful to you?
1 0
(5 out of 5 stars) Held the liner tight
Reviewed By: David H. from Brighton, MI ()
Over time your liner strips start breaking down - I installed new ones when I installed the liner. Kept the liner nice and tight...
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Dale W. from Eden Prairie, MN ()
Pros: work well
Cons: none
Great product at a super price.
Was this review helpful to you?
1 0
(4 out of 5 stars) pool liner 15 x 30 above ground
Reviewed By: TOM D. from Fenton mo. ()
Pros: good liner
Cons: i had to install it
pool liner is as good as any and the price was better than most
Was this review helpful to you?