Part # NL113
Waveless Wall Foam 1/8"X48"X 100'
Closed-cell 1/8 inch foam padding provides a smooth wall backing, preventing rust, corrosion and other wall degradation from puncturing or wearing down your liner!
Help keep your liner like-new for years to come with wall foam!
This also helps insulate your wall during heating season.
* 1/8" x 48" closed cell foam
* Order Spray adhesive separately
* 2lb. density for years of service life
I am purchasing an 18 x 33 ft oval AG pool and based on your equation I would need a 102 ft roll. What is the next available size after 100 ft?
Hello Bryan, There is not a size passed the 100ft roll, the sizes are as followed 60, 75, 85 and 100ft.
How does the wall foam get installed around the skimmer box and outlet jet in an above ground pool if a liner is getting replaced?
When the liner is removed, you will use spray-on adhesive to install the wall foam, then install the liner. When you cut the holes for the skimmer and returns in the liner, the pad is cut with it.
My pool, oval 15x30, has walls 52 inch high. Do you carry wall foam to fit my pool size? If so, I would appreciate item/part number info.
How do I determine how many feet of wall foam I need for my above ground pool?
For a round pool you multiply the pool size by 3.14 For example a 24' round would use this equation 24 X 3.14 = 75.36 You would require 85 foot roll of foam. For oval pools use the following formula 15 X 30 oval pool = 15 + 15 + 30 + 30 = 90. You would require 100 foot roll.
(5 out of 5 stars) Great Wall Liner Protection
Reviewed By: Lee B from Lee B, Newark DE ()
Pros: Easy to install, ample amount in roll.
When installing a liner this is a must! I found this padding to fit well and definitely protects your liner to reduce tears, I have used this before and I would never install any liner without using the padding to protect the liner. This is definitely a good investment for your pool! Don't forget to purchase the spray adhesive for this padding in order to attach to pool walls.