Liner Coping Strip Round (47" Long) - 1384126

Part # 1384126

  5 Average  

Details

Top

Part # 1384126

Alternate Part #'s 1382480

Product Description

Throw out those old, worn out coping strips and replace them with new ones. These plastic, non-corrosive clips hold your liner in place on the pool wall before re-installing the top rail. Brand new coping strips will help insure a firm, proper liner installation.

*Note these are ROUND coping strips used on Haughs and Atlantic Pools and measure 47" long. The majority of above ground pools use these liner coping strips

Top

?     Asked on 7/7/2017 by John

Are these "plastic" strips made replace the metal slotted tubes on my 18x33 pool?

A     Answered on 7/8/2017 by InyoPools Product Specialist Lennox H.

Hi, John. These plastic coping do not replace the slotted tube, you'll need both. 

?     Asked on 6/11/2017 by bill

Will your round coping strips fit over a j hook liner to prevent from pulling in?

A     Answered on 6/11/2017 by InyoPools Product Specialist Alex V.

Bill, This part will only work on certain pools and is typically used with an overlap liner.

?     Asked on 6/10/2017 by Jim

Will they work on intex pools with tubular frame

A     Answered on 6/13/2017 by InyoPools Product Specialist Lennox H.

Hi, Jim. This coping strips will not fit an Intex pool.

?     Asked on 6/8/2017 by Debbie

Will this product work on the following situation. I have an above ground pool, that is a beaded pool. By accident I ordered a overlap liner. I can't exchange the liner for a beaded liner, so I want to be able to use the overlap liner on my beaded pool. I have seen 2 different types of "coping strips" on the internet.

A     Answered on 6/8/2017 by InyoPools Product Specialist Patrick P.

Hi Debbie, In your scenario you would remove your bead receivers and purchase thise coping strips. You would no longer use the bead receivers and you would install your overlap liner and then use these coping strips to secure the overlap liner in place.

?     Asked on 6/4/2017 by Eddie Godwin

I have an older Atlantic Pool J1000 vision wall.(Green sides) 18X33X52". How many of the coping strips would I need. Thank You

A     Answered on 6/4/2017 by InyoPools Product Specialist Stacey M.

Hello, I would get around 35 only to have some back up depending on the old style length has changed.

?     Asked on 5/7/2017 by Michael Klebba

How many of the following strips would I need for a 21 foot above ground pool? Liner Coping Strip Round (47" Long) - 1384126 Thanks.

A     Answered on 5/7/2017 by InyoPools Product Specialist Lennox H.

Hi, Michael. A 21' Round pool uses 15 of these coping strip.

?     Asked on 4/17/2017 by

Is this the coping strips I would need for replacement on an Atlantis NB 1012? How many would I need for an 18x33? If this is not the right part, what is the part number I do need?

A     Answered on 4/17/2017 by InyoPools Product Specialist Patrick P.

If you are needing the plastic strips that secure the liner to the wall of the pool and you have an overlap style liner then yes these are the proper replacement coping strips. An overlap liner would be the style of liner where you can see the liner overlapping the wall of the pool.

?     Asked on 3/29/2017 by Hector Molina

Hi, the coupings I received from you doesn't work on my pool. Does this one work on it? My pool is an Atlantis 12'x24' oval grey wall. If this one work on it, I need to know how many of them are needed.

A     Answered on 3/30/2017 by InyoPools Product Specialist Megan C.

The Atlantis/Esprit 12'x24' Oval 52" Gray Wall can you use those or the 47" Round Coping For Atlantic Pools - NBP2001 and will require a quantity of 16. The Atlantis/Esprit 12'x24' Oval 48" Blue Wall will use the Liner Coping Strips (24 inch) 10 pack - NL108 . If you are unsure that either pool is yours please email photos of the pool walls with the uprights, top rails, and top caps showing. We will review them and assist you with identifying the pool and the parts needed. You may also contact us 1.877.372.6038 for further assistance.

?     Asked on 3/18/2017 by Arthur DEFEO

I have a 27 foot round above ground pool and need to replace the liner. The wall of the pool has a flange on the top and I am not sure what type of coping strip I need to purchase to hold the liner in place. Standard type of coping strips will not fit over the flange. Will this round 47 inch long round strip do the job? Please advise.

A     Answered on 3/20/2017 by InyoPools Product Specialist Lennox H.

Hi, Arthur. If the standard coping didn't work then it's possible that the round ones will fit. If you can provide us with photos of your pool wall we can confirm which one you will need.

?     Asked on 7/24/2016 by Greg

How many come in a pack for 7.99?

A     Answered on 7/27/2016 by InyoPools Product Specialist Lennox H.

Hi Greg, These coping strips are priced individually.

?     Asked on 6/9/2016 by

how many coping strips and how long for each one do I need for a 18 foot round overlap liner pool and how much would they cost

A     Answered on 6/9/2016 by InyoPools Product Specialist Patrick P.

You would require 15 of these 47" coping strips for an 18' Round pool.

?     Asked on 6/2/2016 by Alice

Do the coping strips come in different thickness? I purchased ones else where and they were to small and would not fit over the rim and liner. I have a 24 foot round above ground Atlantic pool.

A     Answered on 6/11/2016 by InyoPools Product Specialist Lennox H.

HI Alice, The Atlantic pool coping strip are unique. If you have one of your old coping you can compare the measurements to the ones we have.

?     Asked on 6/1/2016 by Rachel

I have a J Hook liner-- are these strips able to replace the metal, rusty top pieces to my walls, that seemingly stabilize and secure the wall support? The piece that is right underneath the top rails? Thanks

A     Answered on 6/2/2016 by InyoPools Product Specialist Patrick P.

Hi Rachel, Could you email us a few photos of your pool. One which is a wide shot of the pool showing the wall pattern, a close up shot of the top cap, a close up shot of the top rail, also can you find any part #'s embossed into the top caps? All this information will help us find the correct part for you.

?     Asked on 5/19/2016 by

Will these work to secure the liner for an 18' intex pool that has the oval tube frame versus the round one.

A     Answered on 5/23/2016 by InyoPools Product Specialist Matt S.

No, this coping strip will not work for Intex Pools.

?     Asked on 6/30/2015 by

does this come 57 inch long for 15 feet diameter outdoor pool?

A     Answered on 7/1/2015 by InyoPools Product Specialist Lennox H.

Hi, This only comes in 47".

?     Asked on 6/25/2015 by tim

wil these fit 33 ft. round outback pool,if so how many will I need? thanks.

A     Answered on 6/25/2015 by InyoPools Product Specialist Lennox H.

Hi Tim, You will need a total of 22-27 depending on what pool you have. You can see if you can find you pool in the Outback Pools Information Manual & Reference Sheet to find out how much you will need.

?     Asked on 6/17/2015 by Brandon smith

Will these fit a 27' round outback above ground and how many ? Thanks

A     Answered on 6/19/2015 by InyoPools Product Specialist Lennox H.

Brandon, This Liner Coping Strip Round (47" Long) can be used on most Outback Pools.

?     Asked on 5/14/2015 by

I have a 27' round - 2007 Cantar Atlantic Pool that needs new coping. Will these work?

A     Answered on 5/14/2015 by InyoPools Product Specialist Patrick P.

Yes these coping strips will work on a Cantar Atlantic Pool.

?     Asked on 4/22/2015 by

will these work on a Cantar pool?

A     Answered on 5/4/2015 by InyoPools Product Specialist Patrick P.

As long as you have an overlap style liner which hangs over the wall of your pool then these coping strips would work on your Cantar pool.

?     Asked on 4/1/2015 by Bill

how many liner coping strips part #1384126 will I need for a 15X30 pool. thanks

A     Answered on 4/1/2015 by InyoPools Product Specialist Hector F.

You will need 19 of these coping strips.

?     Asked on 4/18/2013 by Guest

What is the width for part # 1384126, "Liner Coping Strips Round (47" Long)"?

A     Answered on 4/18/2013 by InyoPools Product Specialist Patrick P.

The width of the coping strips, part # 1384126, is 1/2" wide.

Top
Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

None

Local pool stores only offered flat top coping strips.

Written on 7/1/2017 by Guest

While replacing the liner on our above ground pool it seemed each part we removed needed replacing. The coping we removed crumbed like a dry cracker as we removed it. We had purchased coping with the new liner but it did not fit our 20 year old Haugh pool (Namco COOLPool). INYO had the most options available and the items we needed to make our pool swim ready for the summer season. I highly recommend INYO and their consultants for your pool repair and maintanence.

Were these instructions helpful? 
 

Top

Review Summary

  (Average 5 out of 5 stars)
5 Rating
5 star:
 
(5)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)

The Most Helpful Review


The Most Recent Reviews