Part # GOKIT2SALT
Alternate Part #'s PL1082
INYOpools highly recommends replacing the shaft seal, o-rings and gaskets when replacing your motor, if you use your old shaft seal it will not mate up properly with the new pump and may leak. The best value is to go with one of INYO's tune up kits which include the shaft seal and all O-rings, gaskets and lubricant for your pump.
This Tune Up Kit Works on These Pumps:
Tune Up Kit Includes:
For More Pool Pump Motors
Will Hayward seal kit APCK 1024 For superpump series 1600, 2600, 2600x work with this motor?
A.O. Smith 1 HP Round Flange 56J Up Rate Motor - UST1102
Have leaking pump (Hayward, Max-Flo II Pump), installed on the salt water pool.
Motor model is: C48D43A04, HP=1.5, made by A.O.Smith TIPP CITY, OH. Runs well.
The pump is connected to the filter assembly, Model #: SP2710x15, via 4 screws (not 6).
Please advice what KIT (set of seals) do I need as replacements. I need the part number please.
I am confused by a difference between 5250-210 and 5250-235. Therefore, considering the KIT.
Thank you. -Best
Hi, I have a Hayward SP3210X15BH pump. Would the GOKIT2SALT kit be the correct replacement for the pump?. Thanks Mark
Saltwater Tune Up Kit Hayward Super II - GOKIT2SALT This is from your web site but below it reads for Super ll use GOKIT2
The pump is Sp3010x152az and the pool has a salt water chlorinator. WIll the GOKIT2SALT fit this pump?
I have SP3015X20AZ, which one do i need ?
Hello- The Saltwater Tune Up Kit Hayward Super II - GOKIT2SALT is the correct gokit for the super II.
Not real clear, I have a salt system and a Super II. Do I need the GOKIT2 or the GOKIT2SALT?
If you have a salt system you will want to go with the gokit2salt. The shaft seal in that kit is more heavy duty and less corrosive.
My pump is not priming even after cleaning impeller. Will purchasing this kit aid in fixing that problem?
The seal kit can help with loss of prime. I can't guarantee that it will solve your problem. The loss of prime could be from an air leak at the valves or plumbing in front of the pump.
Less than 1 hr
Screwdriver, Pliers, Socket Set, Wrench Set