Part # PL1500
Manufacturer Code NE6150B
Alternate Part #'s 72729, NE6150B, NE6151B
Same quality as Hayward, Sta-Rite and Pentair!
The PureLine Pure Pro XL is a powerful above-ground pump featuring a corrosion proof construction that delivers years of reliable service. This Pure Pro XL is high performance pump that is quiet, efficient and all of this at an affordable price. The top discharge design fits most filters making installation a snap and its extra large clear lid allows for easy cleaning. Replace your old inefficient pump with this water moving dynamo.
Is a PL 1500 sufficient for a 14" sand filter, 50 lbs sand, 18' x 52" above ground pool
Hi, Johnson. It's possible depending on the maximum flow rate of the filter.
I have an older Hayward Power Flo? pump (BN25 motor, 1HP 115V, 12A, 3450 RPM). Pool is a 15'x30'x48". 150 lb Hayward sand filter. Is this 3//4HP pump sufficient for my 10,000 gallon pool? At 7.3 Amp vs. 12 Amp with the same RPM, it seems that it would save a lot of electricity. Am I missing something? Thanks!
Hi Don, yes the PL1500 3/4 HP would be sufficient for a 15' x 30' and would save you a considerable amount on your operational costs.
will my flex hoses connect with the quick connects? I now use hose clamps.
Cedric, The quick disconnect would be used if you planned on hard plumbing the system. If you would like to use hoses and clamps, you would need to order hose adapters.
i have an above ground pool 22x52...will this pump keep my pool clean?
Hi Robyn, yes this PureLine Pump would be adequate for a 22' x 52" above ground pool.
Could you use this as a separate stand alone pump from the one that filters the pool to use for vacuum to waste?
Hi, Jack. Only if the water level is higher than the pump, you'll need a self-priming inground pool pump like the PureLine Pure Flow Pool Pump.
I am looking to replace my standard intex pump with something better. (15x48" pro series) Would this work with adapters? Would this be too strong for a standard filtration system?
Hi. This pump will not work with Intex adapters and will be too strong for the Intex filter. I would recommend using the PureLine 19" Above Ground Pool Sand Filter System W/ 1 H.P Pump - PL1511 or Jacuzzi Laser 16" Sand Filter W/ 1 HP Pump - 94084953
THINKING ABOUT BUYING THE NE61150B POOL PUMP,WHAT TYPE OF WARRNETY COMES WITH THIS UNIT?
Hi, Richard. This pump has a (1) year limited warranty.
how loud is this item (decibel level)
Hi, Eric. The decibel rating of this pump is not available.
I have a Coleman "steel wall" 15' x 36". Pump that came with it is not sufficient. Would this pump work?
Yes we would suggest the PL1500 pump as a great upgrade for your Coleman steel wall 15' x 36"
Will this work as a replacement pump for my Sandpro 50d 1/2 hp pump? Mine froze. Does it come with strainer basket & 2 hoses?
Hi Karen, This pump is a bit too large for the SandPro 50 filter but can be used. The strainer is included but not the hoses.
Any reason that I couldn't unbolt the motor from the pump, rotate the discharge 90 degrees, bolt it back together and use it as such? (This is what we did with a SP1575, for which this is a replacement)
The PL1500 is only able to be used as a vertical discharge pump.
Hi all, Can I use this pump for my Koi Pond filter? Can It be used 24/7? Thanks
Hi, Viet. This pump can be used to filter a koi pond depending on the pumps location and elevation. It can also operate 24/7.
hat do you mean it goes on/off by the plug explain I don't understand??????
If you do not have a timer then you have to turn the pump off by unplugging it.
What type of enclosure is needed for weather proofing the motor?
Hi, Preston. You can use the Protective Pool Motor Cover - R221016 if the pump will be placed outdoors or you can build a small shed to house your pool equipment.
Hello, I have a 18'x12' variable depth of 36" to 60". Will this pump be sufficient?
Hi, OJ. Unfortunately, this pump will not be sufficient for your pool because it's designed specifically for above ground, not in-ground pools.
I have a 20' x 48" round Intex pool, 10,000 gallons with a Intex pump SFS1000 rated at 1000 GPH or approx. 16 GPM and a Intex Krystal Clear Sand Filter Pump, rated @ 1600 GPH system flow rate, 2,100 GPH pump flow rate.. Pool pump sits next to pool with a sand filter. Need to replace this pump as I need more suction for cleaning and running pool cleaner, Wanda the Whale. Do you have any suggests on how many HP and what model I would need to get the max. suction . Thanks for you time and help!
I would recommend part number S180T92S, this will give your cleaner better pressure. Those Hayward cleaner require quite a bit of pressure for it to have effective suction power.
I have an 8' round Intex pool and looking to upgrade the pump. Would this one work?
Hello Tristan, the PL1500 would be a great option for your 8' pool.
I have an 5063-101 3/4 115/230 8.0/4.0 SINGLE VERTICAL NO CORD 20” 94026929 S7LR-S. Can I replace my old one with the one that you offer? Thanks
Hi Avil, Yes the PL1500 3/4 HP pump would be a suitable replacement for your Jacuzzi 94026929 S7LR-S pump.
Is this pump good for a 3000 gal oval pool? If so what kind of saltwater system should I get?
Hello, Do you mean 3,000 gallons or 30,000 oval? How big is your pool?
I have a Sand Dollar SD60 system on a 22' X 52" round pool. I think the 1 1/2hp pump on it right now is overkill. Would this pump be a good replacement pump for my current system and still be able to efficiently run water through the sand filter?
Hi Brad, A 1-1/2 hp pump is too much if you're just using it for water circulation. The PL1500 can be used as a replacement, and circulate the water in you pool efficiently.
can I use one of these pumps for a 22 x 52 above ground intex pool
Hello, Depending on your filter, you may/may not be able to use this pump. it may be too powerful for your filter.
is this a vertical or horizontal discharge
This is a vertical discharge.
Will this pump work with 16 foot x 3 foot round Pool with 20 gpm sand filter?
Yes, this pump would be a good choice for a 16' round above ground pool.
Is this pump a dual voltage (208/230 - 115V) and what's the amperage rating?
Hi John, This is not a dual voltage pump it is 115V only and comes with a cord and standard 3-prong plug. The amp draw on the 3/4 HP PureLine Pure Pro XL is 7.3 amps
I have a 18 ft round pool w/75gpm max sand filter will this pump work?
Yes this pump would be a great option for an 18' round with a 75 GPM filter.
Will this replace a pump fs1500c?
I believe the FS1500C is a submersible pump and this is not a submersible pump.
Will this pump replace my -aquatools model at2410110pump
Hi Bill, Yes this would be a great replacement for your AquaTools pump the plumbing ports may not be in the exact location as your AquaTools pump but if your are using flexible hoses this would not be an issue. This pump uses a 115V standard 3-prong cord so you may want to double check that your current pump is using a standard 3 prong cord.
does a power cord come with this pump? I do not see one in picture.
Yes this unit Comes with a 6ft. cord – 110volt AC
Would this pump work for my 24 ft, 36 in deep above ground pool? Also, is it safe to use outdoors?
Hi, The 3/4 Hp Above Ground Pool Pump can work with your 24' x 36" above ground pool and is safe to use outdoors.
will this replace a Pro line sd 0910231879 1 HP pump
I was not able to find any information on your Proline SD 0910231879 1 HP Pump to confirm if this 1 Hp Above Ground Pool Pump would be a suitable replacement. Can you provide information on your size pool, filter and distance from pool to equipment.
what hp pump do u recommend for 12ft rd 52in deep above grd pool
Hi Neil, this would be the pump that we would suggest for a 12' round 52" above ground pool.
I have an above ground oval pool, 12,000 gallons with a 150 lb. sand filter.. I have calculated my gpm to be 25.. Will this be enough pump for my pool, could I use a smaller one or do I need a larger hp pump?
Hi Jeff this 3/4 HP Pump would be a great option for a 12,000 gallon pool.
Does this pump have an on and off switch ?
No this pump does not have an on/off switch. We would suggest going with this Above Ground Pool Pump Timer, which gives you an on/off switch as well as a timer.
I have a 24 foot round above ground pool.the motor is a 1 hp 3450 rpm part number 9402-7588 description of pump is S7LR6. this is a JACUZZI system. I want to know what will enterchange.where I can get one for a reasonable price.
Hi Edward, We do carry your same Jacuzzi 1HP SLR Pump here. You could possibly go with the NE6150B pump but you may have some re-plumbing. The Jacuzzi SLR Pump would be a drop in replacement.
I have a Reliant model #72729, 115 volts, 60 hz, 8.8 amps, 1-1/2 pipe size, 1 HP. My pool is 27 feet. Would this one work for my pool or would i be better off getting the 1.5 HP? And would it works for my pool? I have a huge sand filter with it
For a 27' round pool I would suggest going up to the 1-1/2 HP Above Ground Pool Pump especially since you have a very large sand filter which likely will have no problem handling the output of the 1-1/2 HP pump.
I have a pentair pump 1.5 hp model 019326210 would like to replace it with this one will this work,what are the amps,and is it quiet thanks
This pump draws 8.8 amps and is a suitable replacement for your Pentair pump. This pump would be as quiet as any standard above ground pool pump.
Can I use this pump with a Jacuzzi Laser 190?
Yes as long as you are using this on an aboveground pool.
Will this pump handle a 24ft above ground pool or would I need a 1.5 hp?
Paul, Yes this 1 Hp Above Ground Pool Pump can handle a 24ft round above ground pool. A 1.5 hp pump will be excessive but if you have a big enough filter you can use a 1.5hp pump.
Will this pump work in conjunction with a dough boy D.E. filter system? What is the RPM speed of the pump?
Yes this will work with a Doughboy DE system and this pump operates at 3450 RPM's
Does this pump have an on/off switch?
It does not; the pump goes on and off by the plug.
(4 out of 5 stars) Replacing Pump
Reviewed By: David M. from Philadelphia, PA ()
Pros: Got it in the mail quickly. Easy to install.
Cons: Need to be able to turn threaded end that goes into the filter. It was easy to do with the pre filter.
It was easy to find a compatible pump on the website. It only took a few days before it arrived. Fit like a charm.
(4 out of 5 stars) low cost pool pump
Reviewed By: DrMarvelo from Central NY ()
Pros: price, does the job
Cons: a bit noisy, did not come with twistlok plug
Received pump exactly 2 days after placing order, easy to install, has been operating now for about 3 weeks without issue,