Hey, looking for a top O-ring for a spa multiport and spider gasket. Won't know the exact size til i get it open but I cant open it til I get a replacement part. Just wondering if you know the sizes for a spa multiport? would def. help me out.
Reply
Unfortunately we would need the multiport model in order to cross reference parts for it. If you cannot locate the model we may be able to also cross reference using a part numbr off of one of the parts directly connected to that valve.
Reply
I have a TA 60D/TA60 sand filter that is leaking from the valve. What is the part # and cost of the replacement washer/O-ring?
Reply
Hi, Carl. If water is leaking out of the valve, you'll need to replace the valve o-rings. So you'll need to locate the valve model number in order to locate the replacement o-rings.
Reply
I have a Pentair Tagelus sand filter Modal TA-60/60D leaking around the handle. What is the O-ring kit for this valve?
Reply
Danny, could you let us know if your valve clamps on our screws onto the filter tank? Also is the pipe going into the valve 1.5" pipe or 2" pipe? This will help us determine the proper replacement parts for you.
Reply
Do I really need all these O rings to replace the sand in my Pentair TA 100D? It has a clamp style valve.
Reply
Hi, Dale. You're not going to use all the o-rings included in this kit. Based on the age and valve style, you will use specific ones.
Reply
I have a Purex Triton Tagelus sand filter model TA 40/400 that is leaking around the handle. By handle that you move between backwash, filter, rinse, waste, etc. It is a clamp on valve. Is there an o-ring that needs replacing or do I need to purchase a whole new valve? It is 1.5" hoses on it.
You can rebuild the valve with one of our kits if you could provide the model number of the multiport valve.
Reply
Where would I find the model number?
Reply
That model number should be on the top of that valve on the label. If you cannot locate that you may be able to locate a part number on one of the plastic parts of the valve itself or send a few closer images of it to upload@inyopools.com so a tech can review and further advise.
Reply
