Hey, looking for a top O-ring for a spa multiport and spider gasket. Won't know the exact size til i get it open but I cant open it til I get a replacement part. Just wondering if you know the sizes for a spa multiport? would def. help me out.
Reply
Unfortunately we would need the multiport model in order to cross reference parts for it. If you cannot locate the model we may be able to also cross reference using a part numbr off of one of the parts directly connected to that valve.
Reply
I have a TA 60D/TA60 sand filter that is leaking from the valve. What is the part # and cost of the replacement washer/O-ring?
Reply
Hi, Carl. If water is leaking out of the valve, you'll need to replace the valve o-rings. So you'll need to locate the valve model number in order to locate the replacement o-rings.
Reply
I have a Pentair Tagelus sand filter Modal TA-60/60D leaking around the handle. What is the O-ring kit for this valve?
Reply
Danny, could you let us know if your valve clamps on our screws onto the filter tank? Also is the pipe going into the valve 1.5" pipe or 2" pipe? This will help us determine the proper replacement parts for you.
Reply
Do I really need all these O rings to replace the sand in my Pentair TA 100D? It has a clamp style valve.
Reply
Hi, Dale. You're not going to use all the o-rings included in this kit. Based on the age and valve style, you will use specific ones.
Reply
I have a Purex Triton Tagelus sand filter model TA 40/400 that is leaking around the handle. By handle that you move between backwash, filter, rinse, waste, etc. It is a clamp on valve. Is there an o-ring that needs replacing or do I need to purchase a whole new valve? It is 1.5" hoses on it.
You can rebuild the valve with one of our kits if you could provide the model number of the multiport valve.
Reply
Where would I find the model number?
Reply
That model number should be on the top of that valve on the label. If you cannot locate that you may be able to locate a part number on one of the plastic parts of the valve itself or send a few closer images of it to upload@inyopools.com so a tech can review and further advise.
Reply
Doing a sand replacement on my Tagelus TA 100D with 2" valves(#145240)
Do i just get this kit and that will cover all my o-rings to replace during the job?
Reply
Yes, the PacFab TA Series O-ring Kit - APCK1143 is great to have when replacing the sand. It will work with the TA100D filter. We have How To Change Sand In a Sand Filter http://www.inyopools.com/HowToPage/how_to_change_sand_in_a_sand_filter.aspx that you may find helpful.
Reply
My Pentair Tagelus Sand Filter is leaking around the clamp between tank and the 6-way valve. Do I need a new O-Ring? The tank is about 15 years old.
Reply
Hi Debbie, it could be that the o ring has failed however it is also possible that there could be damage to the actual filter body itself as well. I would suggest thoroughly inspecting the area when the parts are removed and if the o ring does seem to have failed please locate the specific model of the filter and we can confirm the o ring needed.
Reply
I have a Tagelus 60D with 2" ports that when I put in filter mode, it also bleeds out the backwash port. It's been sitting all winter and today was the first day i backwashed and rinced...then put into filter and now it's bleeding. Will an o-ring kit fix this, if so, what part #?
Hello Richard, most often the reason for the valve to be leaking out of the waste/backwash port is the main seal inside of the valve has failed. For your valve model that would be part number PL0742. Essentially you would need to take apart the valve in order to replace that assembly with the gasket. I have also emailed you an estimate attached to your account with us that you can convert to an order if you would like.
Reply
