Model # NY980
BLUE WAVE SPRING START-UP KITS
FEATURING POWERFUL CHLORINE SHOCK!
Blue Wave's spring start-up kits contain everything you need to open your pool this spring. We’ve pre-formulated and pre-measured each kit to fit your pool size. All you have to do is pour each product into the pool as instructed. Plus, unlike other kits, Blue Wave “packs a punch” with super-strong BURST (dichlor) shock. After the winter months it is important to rid your pool of the dangerous bacteria and contaminants that have built up – BURST will do the job! Each kit comes complete with pool opening instructions. Choose the kit that best fits your pool size (see contents below). Remember that the liquids in each kit have been concentrated for a single dosage in your pool size.
7,500 GALLON KIT INCLUDES:
-1 pint Blue Wave Algaecide
-1 pint Blue Wave Shimmer
-1 pint Blue Wave Stain & Rust Preventer
-1 lb. Blue Wave Burst Shock
15,000 GALLON KIT INCLUDES:
-1 quart Blue Wave Algaecide
-1 quart Blue Wave Shimmer
-1 quart Blue Wave Stain & Rust Preventer
-2 lbs. Blue Wave Burst Shock
30,000 GALLON KIT INCLUDES:
-1 quart Blue Wave Concentrated Algaecide
-1 quart Blue Wave Shimmer Clarifier
-1 quart Blue Wave Stain & Rust Preventer
-3 lbs. Blue Wave Burst Shock
the kit you sent me did not include instructions1
Reply
Hi. Click this link to view the Blue Wave Start-Up Opening Instructions.
Reply
What chemicals do you need with brand new pool?
30,000 gallons
Reply
Cathy, There are several chemicals you will need to properly balance your pool. This How To Guide will provide you with the necessary information in detail.
Reply
More than 8 hrs
None
Remove cover and get all plugs installed or removed depending on the location. Get the pump running as soon as you can. Let pump run while you start vacuuming but make sure you have a skimmer sock to help keep your filter from clogging up. Much easier to remove skimmer and clean the sock every 10 minutes for the first vacuuming. After running for a while take water sample to pool store(I check it first and write down my readings, then I can compare to pool store readings to make sure my testing is working properly). Add the chemicals they suggest to get the PH and AL where it needs to be. Then I started adding the opening kit. I added the metal remover and the shimmer and let that circulate. By this time it is clean enough to start using the automatic cleaner. The next afternoon I put the shock in. The next morning the water was looking very good, just need to keep using the skimmer socks and was cleaning my filter. (I also use last years filter for the first day and keep cleaning it) After shocking and automatic cleaner working for a day or 2 I then go ahead and install my new filter. All looks great within a few days.
The Most Helpful Review
1 0
(5 out of 5 stars)
Reviewed By: Joseph B. from New Jersey ()
No issues with this product
Was this review helpful to you?
The Most Recent Reviews
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
When i purchase an opening kit from my local pool store, i end up adding more algiside or chlorine in order to ge to normal levels. This kit, on the other hand, does not require anything extra.. after opening the pool, we directly transition to the wekly maintanance mode..
Was this review helpful to you?
(5 out of 5 stars) Everything in one kit!
Reviewed By: Inyo Customer ()
Everything needed for spring start up. Pool looked great in only 2 or 3 days.
Was this review helpful to you?