Model # NY475
Blue Wave water balance chemicals
The first, most important step to proper pool care is to keep your pool water in balance. This will ensure that you are getting the most effective use of your chemicals. Test daily to ensure that pH, total alkalinity, calcium hardness and cyanuric acid (stabilizer) are within the correct levels.
pH INCREASER
Use as needed to raise the pH level to the ideal range of 7.2 to 7.6 ppm. Slows the rapid loss of chlorine caused by low pH, and slows chlorine dissipation, so your pool uses less chlorine. Blue Wave ph increaser stops eye irritation, etching and corrosion caused by low pH. Contains sodium carbonate “soda ash". Recommended dosage: 1 lb. per 10,000 gallons.
Click here for more Pool Balancers
Following chemical treatment, how long do I have to wait before I use my pool?
Reply
With the exception of superchlorinating (which requires waiting until the chlorine level drops to recommended levels), you can generally use your pool when the chemical is dispersed throughout the pool. Fifteen minutes to one hour is a good rule of thumb.
Reply
The Most Recent Reviews
(3 out of 5 stars) PH Pail
Reviewed By: Timmy ()
I ordered the pail but received a bag/
Response From INYOpools.com: Dear Customer, We do apologize for any problems this may have caused, however we do have a disclaimer on our chemical Pool Balancers page that states the following: *NOTE: Chemical packaging may vary from images shown. We cannot guarantee type of packaging (i.e. bucket, bag or box). You view this at the bottom of the following link: http://www.inyopools.com/chemicals_balancers.aspx
Was this review helpful to you?