Model # EC-2-16
By Del Ozone
Model # EC-2-16
For New or Existing Pools
Corona Discharge Ozonators for Residential Pools offered at a Low Price!
Eclipse 2 / Eclipse 4
Corona Discharge ozone generators produce far more ozone than comparably sized UV ozone generators. The Del ECLIPSE line of CD ozone generators produce up to 3 times the concentration of ozone produced by a UV generator. The ECLIPSE units produce ozone concentrations reaching 1,350 ppm while UV generators top at about 550 ppm.
The Del ECLIPSE 1-4 units are for in-ground pools with water capacities from 7,000 - 25,000 gallons (ECLIPSE-1) 15,000 50,000 gallons (ECLIPSE-2) and 25,000 - 100,000 gallons (ECLIPSE-4). The numbers vary depending on whether you choose the Del Eclipse as your primary sanitizer or as your secondary sanitizer. The more ozone you have the less chemicals you will require. These units install easily into new or existing pools.
The ECLIPSE units are designed for installation with an adjustable injector manifold (included) plumbed into the main return line after all other pool equipment as shown below. The Del ECLIPSE will operate in unison with the pool's main time clock.
Dispersion method: Plumbs into swimming pool return line; injects ozone through a venturi injector (included) when the swimming pool circulation system operates.
ECLIPSE 1-4 Unit Specifications:
ECLIPSE-1: 110/120V, 0.06A, 7.2W, 60Hz; 220/240V, 0.06A, 14.4W, 50/60Hz
ECLIPSE-2: 110/120V, 0.12A, 14.4W, 60Hz; 220/240V, 0.12A, 28.8W, 50/60Hz
ECLIPSE-4: 110/120V, 0.24A, 28.8W, 60Hz; 220/240V, 0.24A, 57.6W, 50/60Hz
Cabinet: Extruded aluminum construction.
ECLIPSE-1: 7.75"W x 8"H x 2.5"D
ECLIPSE-2: 7.75"W x 14"H x 2.5"D
ECLIPSE-4: 7.75"W x 24"H x 2.5"D
Warranty: One year.
Components: ECLIPSE ozone generator, ozone supply tubing, standard parts bag, adjustable injector manifold, installation manual.
ECLIPSE-1: 15scfh; 450ppm; 0.3gr/hr
ECLIPSE-2: 15scfh; 700ppm; 0.5gr/hr
ECLIPSE-4: 15scfh; 1,350ppm; 1.0gr/hr
Click here to install del eclipse
If you install an ozone injector before the tablet chlorinator, won't the ozone gas displace the water in the tablet chlorinator resulting in no water to leach chlorine from the tablets? How could you avoid this? Thanks!
Hello - Per the Del Zone Eclipse Manual " 2D-1. Plumbing the Injector Manifold: The 2" DEL Adjustable Injector Manifold (Figure 2) must be installed in the pool's main return line after all other pool equipment (pump, fi lter, and heater)."
When installing an ozone generator on an in-ground pool with an in-line tablet chlorinator like the Pentair model 320, would the ozone generator injector be placed before or after the chlorinator? Thanks!
The ozonator would be installed inline before the tablet feeder.
Do I need to do anything to the pool before the Del Eclipse is installed?
Yes, it is recommended that the filter is cleaned one day before starting the ozonator. The pH and alkalinity levels will need to be balanced. The pool will need to be super chlorinated and run continuously for 24 hours.
I will be installing a salt chlorine generator and a Del Eclipse Ozonator. Which piece of equipment should be last, the salt chlorine generator or the ozonator? Why?
The ozone will help keep the salt cell plates clean, so generally the salt cell should be installed last in line. If space is limited, the ozone injector can be installed last in line.
Can the Eclipse or Total Eclipse ozonators be used on an above ground pool?
Either model will work well on an above ground pool but we would recommend the use of the MDV (Mixing Degas Vessel) kit to protect the vinyl liner.
What is the difference between the Del Ozone Eclipse and Total Eclipse units?
The Total Eclipse ozone system uses an internal pump to operate 24-hours per day, independently from the main filtration system, while the standard Eclipse ties into the main pump cycle.