Model # GLXTWRFPS8
By Goldline Controls
Model # GLXTWRFPS8
Alternate Part #'s GLX-TW-RF-PS-8
The Aqua Logic System has 4 different control options available. Note: This remote is the version 1 remote which works with base reciever AQLBASERF, if you have version 2 base receiver AQL2BASERF then this is not the correct remote for you.
1. Wall Mounted Wired Remote - The wired remote requires 4 conductor wire to be run from the equipment pad to the location in the house where the Wall Mounted Wired Remote will be hooked to the wall. You can Add Up to 3 Wired Remotes to your Aqua Logic system. If you are adding the Aqua Logic to an existing pool, the wireless remote may be a better option.
2. Wall Mounted Wireless Remote - Aqua Logic wireless remotes require a Wireless Base Receiver. Only 1 Base Receiver is needed to operate any combination of 4 wireless remotes. The Wall Mounted Wireless Remote does not require any connections from the remote to the equipment set. This makes the wireless option ideal for retrofit applications. Unlike table top wireless remotes that can be moved around the house, this unit is mounted to the wall and plugged into a power outlet nearby.
3. Wireless Table Top Remote - This portable display/keypad with rechargeable batteries allows the homeowner to control the system from anywhere around the pool area or inside the house. Designed for indoor or outdoor use but must be protected from direct rain contact. Only 1 Base Receiver is needed to operate any combination of 4 wireless remotes. The Table Top Wireless Remote does not require any connections from the remote to the equipment set. This makes the wireless option ideal for retrofit applications.
4. Wireless Spa Side Remote - A Base Receiver is required when using the wireless Spa Side Remote. Only 1 Base Receiver is needed to operate any combination of 4 wireless remotes. Control up to 6 functions in the comfort of your spa with the Wireless Spa Side Remote.
Click Here for Wall Mounted Wired Remote Owner's Manual
Click Here for Wall Mounted Wireless Remote Owner's Manual
Click Here for Wireless Spa Side Remote Owner's Manual
Click Here for Base Reciever Owner's Manual
Click here for more Aqua Logic
My indoor wireless control has a communication error 1 message. What does that mean
Hi, Cheryl. The indoor controller is unable to communicate with the main controller. It could be an issue with the antenna, PCB or the wireless device.
I have this non working control panel in our bedroom. Pool tech says the board is bad. How do I know the serial number to know if I am buying the right part. Can I just buy the board or do I need Ron buy the outer shell also? Are there any sales on this item?
Hello Barbara, I would double check with Hayward 1800-657-2287 to check about the serial number and then talk with a tech to see what parts to replace to fix the problem, you might need more than just the board.
Where can I get an manual on how to control this wall mount. A user's manual
Barb,You can view an owner's manual for the Aqua Logic Wireless Remote here
I have two of these need to replace the batteries where can I get them
Rick, If there is a Batteries Plus store in your area, you can try to see if they have the replacement battery.