The Aqua Logic System has 4 different control options available.

1. Wall Mounted Wired Remote - The wired remote requires 4 conductor wire to be run from the equipment pad to the location in the house where the Wall Mounted Wired Remote will be hooked to the wall. You can Add Up to 3 Wired Remotes to your Aqua Logic system. If you are adding the Aqua Logic to an existing pool, the wireless remote may be a better option.

2. Wall Mounted Wireless Remote - Aqua Logic wireless remotes require a Wireless Base Receiver. Only 1 Base Receiver is needed to operate any combination of 4 wireless remotes. The Wall Mounted Wireless Remote does not require any connections from the remote to the equipment set. This makes the wireless option ideal for retrofit applications. Unlike table top wireless remotes that can be moved around the house, this unit is mounted to the wall and plugged into a power outlet nearby.

3. Wireless Table Top Remote - This portable display/keypad with rechargeable batteries allows the homeowner to control the system from anywhere around the pool area or inside the house. Designed for indoor or outdoor use but must be protected from direct rain contact. Only 1 Base Receiver is needed to operate any combination of 4 wireless remotes. The Table Top Wireless Remote does not require any connections from the remote to the equipment set. This makes the wireless option ideal for retrofit applications.

4. Wireless Spa Side Remote - A Base Receiver is required when using the wireless Spa Side Remote. Only 1 Base Receiver is needed to operate any combination of 4 wireless remotes. Control up to 6 functions in the comfort of your spa with the Wireless Spa Side Remote.

Click Here for Wall Mounted Wired Remote Owner's Manual
Click Here for Wall Mounted Wireless Remote Owner's Manual
Click Here for Wireless Spa Side Remote Owner's Manual
Click Here for Base Reciever Owner's Manual

Click here for more Aqua Logic