HeatPro Heat Pump 95,000 BTU - HP21004T

$2,589.99

IN STOCK
FREE SHIPPING

Part # HP21004T

By Hayward Pool Products

  4.5 Average  

Details

Top

Part # HP21004T

Product Description

Extend your pool season with a Hayward® HeatPro® heat pump.  Quiet and economical, heat pumps use the outside air and a titanium heat exchanger to generate heat for a fraction of the cost of gas.  Save up to 80% on operating costs.

Features:

  • Titanium Heat Exchanger - excellent salt water and chemical corrosion resistance
  • Exclusive 'Ultra Gold' evaporator coil corrosion resistant especially in coastal areas
  • Quiet operation - quiet backyard environment
  • AHRI certified performance - independent lab certified performance ensures the value of the purchase
  • 2in x 2 1/2in CPVC union plumbing connections - common union for installation or service, adapts to larger plumbing recommended for greater efficiencies
  • Light weight - less than 250 lbs.

Warranty:

  • 2 Year Warranty on manufacturer defects
  • 5 Year Warranty on Compressor
  • 10 Year Warranty on Titanium Tube

Product Specifications

BTU:
95,000 BTU
Coefficient of Performance:
6.2
Volts:
240V
Hz:
60 Hz
Phase:
Single
Recommended Breaker Size:
40
Min Flow Rate:
30 GPM
Max Flow Rate:
75 GPM
Dimensions:
30¼" W x 34" D x 37" H
Weight:
282 lbs.
Refrigerant:
R-410A
kW:
4.9 kW
Compressor Size:
5 HP
Compressor:
Scroll
Heat Exchanger:
Titanium
Electronic Temp Control:
Yes
Max Water Temp:
104 °F
Top

?     Asked on 6/12/2019 by AMI

Hello, we recently bought model hp21004tc 95,000btu. The heat pump was off and when turned on there was LOC on the display and impossible to unlock it. We read the manual and tried procedures gor new and old models, but not working. Please help to unlock it. Thank you

 Reply

A  Answered on 6/12/2019 by InyoPools Product Specialist Lennox H.

Hi, AMI. I had to walk a customer through this same issue. He had to repeat the HPEC-003 steps a couple of times which unlocked the control panel. . 
 Reply


?     Asked on 5/27/2019 by John G LI NY

I have a 24' x 52"semi in ground pool, that is in the sun 90% of the day, would the HP21004T be sufficient. Also running a 1.5 hp Hayward pump and filter,is that sufficient.What electrical connection is needed. Thanks
 Reply

A  Answered on 6/19/2019 by Industry Professional

This unit will work with this size of pool during the swimming season as long as the air is warm enough to pull heat out of it. This unit requires a 240v connection
 Reply


?     Asked on 5/20/2019 by

I live in north east PA. I have an above ground pool that is 18x33, 18000 gallon pool. Which heat pump heater would you recommend for the size pool I have and climate I live in?
 Reply

A  Answered on 5/25/2019 by InyoPools Product Specialist Lennox H.

Hi. Other factors will need to be considered. If you're using a solar cover, the HP21104T will be sufficient, if not you will need a larger unit like the HP21404T
 Reply


?     Asked on 4/23/2019 by K.F.

I ran a 10 gauge wire just before my patio was built to make things easier to add a heater in the future. Will a 10 gauge wire be sufficient to run this pump? I’m worried I did the work for nothing. Please tell me I didn’t :(
 Reply

A  Answered on 4/25/2019 by InyoPools Product Specialist Lennox H.

Hi, K.F. A 10 gauge wire can be used with a 40 amp breaker with a run up to 95 feet from the breaker. 
 Reply


?     Asked on 3/26/2019 by Corrie

I live in Alliance Ohio I have an 18,000 gallon would like pool temperature at 85 to 90 degrees what size do you recommend
 Reply

A  Answered on 3/30/2019 by InyoPools Product Specialist Lennox H.

Hi, Corrie. To effectively heat your pool without using a cover, you will need a 125,000 BTU or higher unit. 
 Reply


?     Asked on 3/19/2019 by Rene

Hi, what is the level of noise of the HP21004T (95000 BTU TItamium)? Thanks
 Reply

A  Answered on 3/19/2019 by InyoPools Product Specialist Lennox H.

Hi, Rene. The decibel rating of this unit is not published, so I'm unable to locate that info.
 Reply


?     Asked on 2/8/2019 by

I have a 30x16 5.5 ft 16400 gallons in Jacksonville Fl full sunlight all day is this a good pump for my pool?
 Reply

A  Answered on 2/8/2019 by InyoPools Product Specialist Michelle B.

Hello, We recommend a minimum of 125k btus for your size pool. 
 Reply


?     Asked on 2/5/2019 by John

With the free shipping, will they deliver it to my side yard by my pool equipment?
 Reply

A  Answered on 2/6/2019 by InyoPools Product Specialist Lennox H.

Hi, John. The delivery will be curbside. 
 Reply


?     Asked on 12/8/2018 by

I have a Hayward model #HP21004T is almost 4 months old. The display was blank running for 6 hrs, it is blowing cold air. I turned it off and the back on, display wad 80 then dropped to 79.

 Reply

A  Answered on 12/10/2018 by InyoPools Product Specialist Joe S.

Good morning, for troubleshooting or warranty we recommend you contact Hayward directly at  (908) 355-7995 (U.S.)
 Reply


?     Asked on 9/22/2018 by John

Is there a unit that is dual purpose? Cool in the summer and warm in the winter?
 Reply

A  Answered on 10/9/2018 by InyoPools Product Specialist Joe S.

The united needed would be Hayward Heat Pro Heat Pump 120,000 BTU Heat/Cool - HP31204T
 Reply


?     Asked on 8/12/2018 by Joseph DiPaula

i have a 23000 gal pool if i size it to a larger heat pump would that heat faster and shorter run time
 Reply

A  Answered on 8/12/2018 by InyoPools Product Specialist Lennox H.

Hi, Joseph. Yes, a larger unit will heat the pool faster with a shorter run time. 
 Reply


?     Asked on 6/19/2018 by Patty

I live in southwestern PA. I have a 14,500 gal pool. Have day direct sun. Like temp at 80. Would this unit work. My last Hayward was a HP ABG that worked well
 Reply

A  Answered on 6/19/2018 by InyoPools Product Specialist Megan C.

Hi, Patty. Yes, the Hayward Heat Pro Heat Pump 95,000 BTU - HP21004T is a great fit for your pool size. 
 Reply


?     Asked on 6/7/2018 by Ryan

I recently purchased this item from you. Was curious to see there’s no built in timer feature to coincide with my filter pump, which runs on a timer. Should I just leave it on 24/7 and let it rest when the filter is not running? (Error message Flo) Unfortunately the electrical box doesn’t have a timer either.
 Reply

A  Answered on 6/9/2018 by InyoPools Product Specialist Alex V.

Ryan, You can set the temperature on the heat pump. Once the pool pump gets turned off, the heat pump will display a NO FLOW error which means it will not attempt to heat until the pump is turned back on. 
 Reply


?     Asked on 6/1/2018 by YC

Hi, I live in Los Angeles And shopping for a heat pump. I have a 10000 gallon pool and planning to use it even winter time. Los Angeles doesn't have cold winter like east coast. What size would you recommend? Thanks
 Reply

A  Answered on 6/2/2018 by InyoPools Product Specialist Lennox H.

Hi, YC. For a 10,000 gallon pool, a 95K BTU or higher will be sufficient depending on if you want a gradual, standard or rapid temperature increase. 
 Reply


?     Asked on 5/21/2018 by Scott

I have a 16x32 pool in upstate NY (Albany area), with a max depth of five feet. It has full sun exposure all day long, and during July the sun easily heats it into the low 80's. I'd like a heat pump to extend the season and bring the water into the low 80's. Is this a correctly sized heat pump?
 Reply

A  Answered on 5/23/2018 by InyoPools Product Specialist Patrick P.

Hi Scott, based on what you described I would go up to the HP21104T 110,000 BTU Hayward Heat Pump especially since it is only a few hundred dollars more and it will give you additional heat capacity to make sure you achieve the heating goals you stated.
 Reply


?     Asked on 5/20/2018 by Mike

Do all hayward pool heat pumps come precharged and ready to run.
 Reply

A  Answered on 5/21/2018 by InyoPools Product Specialist Lennox H.

Hi, Mike. Yes, they do come charged. 
 Reply


?     Asked on 5/17/2018 by

Hi , Im replacing a HP20854T heat pump unit , which unit would you recommend. i have a semi-inground pool 15x27
 Reply

A  Answered on 5/17/2018 by InyoPools Product Specialist Hector F.

If your older model was heating adequate then I would recommend going with a model close to what you have which would be this Heatpro model HP21004T.  
 Reply


?     Asked on 5/15/2018 by Terrence

Good Morning, I am having a 14-28 pool built. I live in northern part of Florida. What size heat pump do i need. Thank you.
 Reply

A  Answered on 5/15/2018 by InyoPools Product Specialist Lennox H.

Hi, Terrence. Several factors will need to be taken into consideration when sizing a heat pump. Factors like surface area, desired temperature, months in use and run time. This unit can be used but may not be the most efficient. You can use Hayward Heat Pump Analysis to determine which unit will work best. 
 Reply


?     Asked on 5/14/2018 by Mike

What size plastic pipe is needed for this in and out of the heater?
 Reply

A  Answered on 5/14/2018 by InyoPools Product Specialist Lennox H.

Hi, Mike. This unit includes 2" x 2½" Unions, so you can use  2" or 2½" pipes. 
 Reply


?     Asked on 5/1/2018 by Bob

We live in the southwest Marion County FL 34476. Our pool is an in ground 15 x 30 x 4 feet deep in a bird cage.. After our initial spring warm up to 83-84 degree range, we cover the pool with a solar blanket each night until the evening temps stay above 70 degrees. What size Hayward heat pump would you recommend?
 Reply

A  Answered on 5/5/2018 by InyoPools Product Specialist Lennox H.

Hi, Bob. I would recommend a 110K or higher BTU unit. A 95K can also be used if you do not want a large temperature increase. 
 Reply


?     Asked on 4/5/2018 by Mike O

I live in central Florida and used to have a propane heater for my 1000 gal spa connected to my pool. We only heat the spa, and when we do its maybe a couple hours once a week or so. We want to convert to a heat pump but my wife likes it hot (102-104 degrees) will the Hayward 95,000 do that?
 Reply

A  Answered on 4/6/2018 by InyoPools Product Specialist Megan C.

The unit can keep two temperature settings in memory: one for pool mode (max: 95°F/35°C), and the other for spa mode (max: 104°F/40°C).
 Reply


?     Asked on 3/1/2018 by Mike

I live in NY and have a Radiant pool that is 16' X 32', with a max depth of 66". I have a sloped back yard, with one side of the pool completely buried, and the opposite side exposed. Pool is rated for 15,000 gallons and will be in the sun from 9 until 3. Would like to use it from May until September with a temp of 82 -85 degrees. Can I use the Hayward 95K Heat Pump ?
 Reply

A  Answered on 3/1/2018 by InyoPools Product Specialist Kevin G.

Hello, I would recommend going with the HP21254T. Please be advised that this requires a 60 amp 230-volt breaker. 
 Reply


?     Asked on 2/16/2018 by mike

what the amp needed to run this unit and will it do the job in s.w. Florida to keep the water at 86 degree
 Reply

A  Answered on 2/16/2018 by InyoPools Product Specialist Lennox H.

Hi, Mike. This unit requires a 40 amp 240 volts breaker. It can be used to a pool at 86 degrees depending on the size of the pool. 
 Reply


?     Asked on 11/2/2017 by Josh

I live in Orlando, FL and have a 375 sq ft pool (11k to 12k gallons I believe). The pool is caged but in sunlight approx 6 hours per day average. I'd like the water temp to be 82 degrees. Is the Hayward 95k BTU sufficient for me?
 Reply

A  Answered on 11/2/2017 by InyoPools Product Specialist Lennox H.

Hi, Josh. This Hayward 95,000 BTU Heat Pump - HP21004T will be sufficient to heat your pool. 
 Reply


?     Asked on 8/3/2017 by Renee Bergner

Could you please e-mail me the warranty that comes with a Hayward HP21004T. My installer would like to review it before agreeing to install a heat pump bought on line. Thank you. Renee
 Reply

A  Answered on 8/4/2017 by InyoPools Product Specialist Joe S.

Warranty:2 Year Warranty on manufacturer defects5 Year Warranty on Compressor10 Year Warranty on Titanium Tube
 Reply


?     Asked on 7/28/2017 by Bob

Hi: I live in NJ and have a 20,000 gallon pool that gets sun about 1/2 the day. My desired pool temperature is 90 degrees (currently unheated, the pool temperature is 80 degrees). Will the HP21004T do the job?
 Reply

A  Answered on 7/29/2017 by InyoPools Product Specialist Lennox H.

Hi, Bob. I would recommend the HP21254T or the HP21404T unit. 
 Reply


?     Asked on 7/25/2017 by Don Stevens

What is the highest temperature setting for this unit??
 Reply

A  Answered on 7/27/2017 by InyoPools Product Specialist Lennox H.

Hi, Don. The max temperature that this unit can heat to is 100 degrees. 
 Reply


?     Asked on 7/12/2017 by Theresa Wisniewski

I live in Montreal, my inground pool holds 21400 gallons I have sun all day long over my pool I prefer water above 85 F, company who installed my pool installed the 95000 btu but after reading this thread it seems this unit is too small for my pool.
 Reply

A  Answered on 7/22/2017 by InyoPools Product Specialist Lennox H.

Hi, Theresa. Since you pool gets a lot of sun light then a larger BTU heat pump is not required. 
 Reply


?     Asked on 6/22/2017 by Samuel

I live in Orlando, Florida and I will like to purchase the HP21004T 95,000BTU.. Do you think that this would be sufficient to maintin a 80/90 degree temp during the months of Aug/Sep/Oct..or do I need a bigger unit.
 Reply

A  Answered on 6/29/2017 by InyoPools Product Specialist Lennox H.

Hi, Samuel. It will depend on the size of the pool that is being heated. If you can provide the surface area of your pool I can confirm. 
 Reply


?     Asked on 6/13/2017 by Don

I live in NJ and have a 15' X 30' X 54" above ground pool, with sun most of the afternoon, would the 95,000 Hayward Pro Heat Pump be a sufficient enough heater?
 Reply

A  Answered on 7/22/2017 by InyoPools Product Specialist Alex V.

Don, Yes, a 95k btu heat pump will be more than enough for your pool. 
 Reply


?     Asked on 6/9/2017 by Lori

Hello, I am interested in a Haywood heatpro. I have a 15x30 oval, 15,000 gals. What size heater would I need?
 Reply

A  Answered on 6/10/2017 by InyoPools Product Specialist Lennox H.

Hi, Lori. Heat Pumps are special units so the pool size is not the only info we'll need to know. Your location and desired temperature will also determine what size unit you'll need.
 Reply


?     Asked on 6/9/2017 by

I see in the instructions this calls out for a 1/3lb check valve. Is it OK to use a 1/2lb?
 Reply

A  Answered on 6/11/2017 by InyoPools Product Specialist Lennox H.

Hi. Yes, a 1/2 lb check valve will work also.
 Reply


?     Asked on 6/6/2017 by

Hey guys....lot of great info provided here...thanks...we have an oval 33'x18'x52" deep above ground pool in western new york/ buffalo area. Looking to simply raise our pool temps 5+ degrees (high 70's to low-mid 80's)....pool does see a decent amount of sun (on sunny days!!)...we cover daily with a solar cover....use pool from mid May - mid September.....will the Hayward Heat Pro 95,000 BTU work for us....can we go smaller?
 Reply

A  Answered on 8/5/2017 by InyoPools Product Specialist Alex V.

I would recommend the 95k btu heat pump or the 110k btu model. I would not go smaller than that. 
 Reply


?     Asked on 6/4/2017 by Kate

I have an 18 x 30 above ground pool, 4 ft deep with a 15,000 gal capacity. Which of these heaters do I need and can you give me a rough idea of what it costs per season to run one of these? I live in east central Nebraska ( Omaha)
 Reply

A  Answered on 6/9/2017 by InyoPools Product Specialist Patrick P.

Hi Kate, This would be the correct size heat pump for your sized pool. It really depends on how often you run the heat pump as to your electrical charges. I would suggest using Hayward's Heat Pump Cost Calculator to determine your operational costs using this heater.
 Reply


?     Asked on 5/30/2017 by kent

i live in Indiana i have a 10.000 gallon in ground pool will this 95.000 btu heat pump be big enough
 Reply

A  Answered on 6/8/2017 by InyoPools Product Specialist Patrick P.

Hi Kent, If you have a pool only and are looking to extend your pool season by 1 month in the spring and 1 month in the fall then 95,000 BTU Heat Pump would be sufficient.
 Reply


?     Asked on 5/29/2017 by George

I live in Pennsylvania and have a 15x26 foot above ground pool that is 54 inches deep. i live in the woods so I only get about 3-4 hours of sun a day that hits the pool. Without a heater the pool stays in the low 70's. i would like to keep the pool in the mid 80's. What size heater would you recommend for this? thank you
 Reply

A  Answered on 5/30/2017 by InyoPools Product Specialist Patrick P.

Hi George, we would suggest the Hayward 125,000 BTU Heat Pump for your pool configuration.
 Reply


?     Asked on 5/25/2017 by Rob

My local pool store says that Hayward doesn't honor warranties for online sales. Is this true?
 Reply

A  Answered on 5/28/2017 by InyoPools Product Specialist Lennox H.

Hi, Rob. That is no true, As long as the unit is installed by a professional the warranty will be honored.
 Reply


?     Asked on 5/19/2017 by Dennis

I am replacing a 125,000 BTU heat pump. I never used it to heat my pool, only the spa. will the 95,000 BTU unit suffice for the spa alone, and how much longer might I expect the unit to take to heat the spa. The old unit would heat the spa in 60-90 minutes. I live in South Florida.
 Reply

A  Answered on 5/20/2017 by InyoPools Product Specialist Patrick P.

Hi Dennis, You are probably looking at another 20 minutes to heat the spa. For your set up we would suggest the Hayward 125,000 BTU Heat Pump
 Reply


?     Asked on 5/18/2017 by Mike

i have a 24,000 gallon in ground pool. i live in Seattle, WA would a 95,000 BTU heat pump be enough ?
 Reply

A  Answered on 5/20/2017 by InyoPools Product Specialist Lennox H.

Hi, Mike. A 125,000 BTU unit is the minimum recommended size for a pool of your size.
 Reply


?     Asked on 5/15/2017 by Jorde

Hello, I was looking at the 50,000 unit. Is that sufficient for a 12x24 semi inground (above ground) pool? 48" depth. Afternoon shade. From May to early October useage. Temperature- 82+? Afternoon shade after 2:30pm. What size circuit breaker is required? Thanks
 Reply

A  Answered on 5/21/2017 by InyoPools Product Specialist Alex V.

Jorde, A 50,000 BTU unit will be enough but keep in mind that the ambient temperature and humidity will affect how the heat pump will operate. Hayward recommends a minimum of 30 amps for the breaker.
 Reply


?     Asked on 5/15/2017 by Gabriel

Hello, i have a 20,000 gallon inground pool in the desert: las vegas. Will this 95000 btu unit be enough, and will it work in thia dry climate?
 Reply

A  Answered on 5/21/2017 by InyoPools Product Specialist Lennox H.

Hi, Gabriel. Heat pumps can be used in drier climates like Las Vegas but efficiency will drop with low humidity. A 125K BTU unit is recommended for a pool of your size.
 Reply


?     Asked on 5/8/2017 by Nancy

Looking at the 95000btu heat pump heater for our above ground pool, 542sq feet, 15000 gallons. We are in Raleigh NCBCE and want to use the pool during the shoulder season, spring and fall. Will this be big enough to do the job? Does this heat pump also cool the water in hot summer months?
 Reply

A  Answered on 5/9/2017 by InyoPools Product Specialist Scott W.

For you pool size and location I recommend the 125,000 BTU model, HP21254T.
 Reply


?     Asked on 5/8/2017 by brian

I have a 10,000 gallon inground pool. I live in philadelphia area. Will the 95k BTU be enough for me. Thanks
 Reply

A  Answered on 5/8/2017 by InyoPools Product Specialist Scott W.

The 110,000 BTU model would be better for the location you live in.
 Reply


?     Asked on 5/2/2017 by Elizabeth Allen

I have a 30ft round pool that holds 22000 gallons and live in central Ohio. Will the HP21004T be able to heat the pool sufficiently at 95000 BTU's?
 Reply

A  Answered on 5/3/2017 by InyoPools Product Specialist Lennox H.

Hi, Elizabeth. I would recommend the 110K BTU - HP21104T unit. The 95K unit will work but the 110K unit would be efficient.
 Reply


?     Asked on 5/1/2017 by Mitch

My wife and i have a 27'x54" round above ground pool and live in Ohio, will the Hayward Heat Pro Heat Pump 95,000 BTU heat the pool to 85 degrees from the middle of May thru September? If not which one do you recommend?
 Reply

A  Answered on 5/2/2017 by InyoPools Product Specialist Scott W.

I would recommend at least the 125,000 BTU model, HP21254T, for your pool size and location.
 Reply


?     Asked on 4/24/2017 by Erica

Hi. My husband and I have been researching the Hayward pool heat pumps and we're wondering if the 95K BTU pump is sufficient to heat our 24' x 54" round above ground pool from early/mid May to early October. We live in the southern tip of the Pocono Mountains in Pennsylvania - near Hazleton. Thanks!
 Reply

A  Answered on 4/25/2017 by InyoPools Product Specialist Patrick P.

Hi Erica, Yes the 95,000 BTU Hayward Heat Pump would be sufficient for a 24' round above ground pool for the heating needs you explained in your question.
 Reply


?     Asked on 4/13/2017 by Robert

The Hayward Model HP50HA is advertised to heat up to a 13,000 gallon pool. The BTU rating is 45,000. Is that enough? I live in Central Florida and my pool is about 10,000 gallons. Also, the HP50HA looks just like my old Zodiac Titanium which was rated 83,000.
 Reply

A  Answered on 4/13/2017 by InyoPools Product Specialist Scott W.

With 10,000 gallons and living in Central Florida I would not recommend going lower than the 85,000 BTU model.
 Reply


?     Asked on 3/28/2017 by James Tarolli

I live in southeast michigan and have an 18 ft round x 54" high above ground pool. I would love it if i could have my pool open from mid May to the end of September if at all possible. My wife and i love the water very warm, between 88-94 degrees. Can this unit handle the job in terms of the desired temp and the time of the year range. I know we can certainloy have some days in the 40's and even 30's by end of september? Thank you in advance for any help you can offer, Jim tarolli.
 Reply

A  Answered on 3/29/2017 by InyoPools Product Specialist Scott W.

For the location that you live in and the desired water temperature, I would not recommend a model lower than the 125,000 BTU model, HP21254T, if not the 140,000 BTU model, HP21404T.
 Reply


?     Asked on 3/27/2017 by

Is the HP21004T a good heat pump for above ground 12,000 gallons. I live in Pittsburgh Pennsylvania and use a solar cover. Would the HP50TA be better or should I go bigger than the HP21004T? If so what do you recommend?
 Reply

A  Answered on 3/28/2017 by InyoPools Product Specialist Andy O.

Hello- Based off your pool size and location I would recommend going with the Hayward Heat Pro Heat Pump 95,000 BTU - HP21004T or higher. The HP 21004t will get you into the low 80" from April to October, going bigger will heat the pool faster but is not necessary.
 Reply


?     Asked on 3/27/2017 by pete

The pool is 15ftx24 and about 6ft deep would the Hp21004T 95BTU be good for heating the pool and how long would it take to ship to Davenport Fl. Also is the shipping free
 Reply

A  Answered on 3/28/2017 by InyoPools Product Specialist Scott W.

The 95,000 BTU model would be an efficient model for your pool size and location.
 Reply


?     Asked on 3/21/2017 by

I have a 28 ft round pool with 52 inch wall, and it is in upstate NY. Would this pump be big enough to keep the temp in the mid 80s? Thank you.
 Reply

A  Answered on 3/22/2017 by InyoPools Product Specialist Scott W.

Will the size of your pool and your location I would not recommend anything less than the 125,000 BTU model, HP21254T.
 Reply


?     Asked on 3/16/2017 by

My pool is 12 x 24. South Florida. Prefer an 88 degree temp. Will this work for me?
 Reply

A  Answered on 3/16/2017 by InyoPools Product Specialist Andy O.

Hello Yvonne - Yes the Hayward Heat Pro Heat Pump 95,000 BTU will work well for your pool in South Florida. I would still recommend using a solar blanket or Cover Free
 Reply


?     Asked on 12/22/2016 by Sal

Are all heat pumps capable of cooling water temperature
 Reply

A  Answered on 12/22/2016 by InyoPools Product Specialist Adam Y.

Good afternoon Sal, No, Not all Heat pumps have a cooling feature. There are 4 common makers with the cooling feature Hayward, Pentair, Aqua cal and Raypak. If you need or want anymore information on this you can give us a call at 877-372-6038
 Reply


?     Asked on 12/7/2016 by David

I am going to buy a pool heater from you because of this outstanding Q and A. I found this calculator which is better than your link. After running the chart, I just looked at the BTU for the pump they recommend to search other brands with the same BTU. http://roxwebdev01.pixelgate.net/gas_sizing/Raypak.php?appid=1
 Reply

A  Answered on 12/8/2016 by InyoPools Product Specialist Scott W.

Good morning David,Did you have a specific question on this Heat Pro or were you looking at a RayPak?
 Reply


?     Asked on 12/7/2016 by Bryce

I have a 10,000 gallon in-ground pool in FL. Is the 95,000 but a good selection?
 Reply

A  Answered on 12/7/2016 by InyoPools Product Specialist Scott W.

Yes, the HP21004T would be efficient enough for your 10,000 gallon pool.
 Reply


?     Asked on 11/24/2016 by phil

is there a formula to determine the amount of btu,s needed to heat the pool thanks
 Reply

A  Answered on 11/28/2016 by InyoPools Product Specialist Scott W.

Here's a link for an easy way to calculate what size heater or heat pump you need. You will be to know the square footage of your pool.
 Reply


?     Asked on 11/13/2016 by Don

Looks like the HP21004T Hayward heat pump comes in a square model and round? Maybe one has a different model number or one is a newer model? I see two different prices of $2289.00 and $2199.00 which one is it? Also, do you have a $20.00 off promo code like I have been seeing lately? Thank you, Don.
 Reply

A  Answered on 11/14/2016 by InyoPools Product Specialist Scott W.

The HP21004T is the square model, 95K BTU and the HP21104T is the round model, 110K BTU. The 110K model is the only HeatPro unit that has the round shape, all the rest are square.
 Reply


?     Asked on 11/7/2016 by sam

16 x 40 Ing, FBGLS in Northwest arkansas Will have inside diameter (20x 48 - 6 foot high ) telescoping cover 8-10 mm thick lexan.Could I have the heat pump installed close to the pool so that it would be covered by this during the winter and still work. The greenhouse effect would keep the air inside probably above 45-50 about 11 months out of the year probably at least. Would there be enough air flow within that space to efficiently operate the unit. Would it help to dehumidify the air.
 Reply

A  Answered on 11/8/2016 by InyoPools Product Specialist Scott W.

If you wanted it indoors it will not be effective. If you are at 45-50 degrees you will be better off with a propane or natural gas heater.
 Reply


?     Asked on 11/6/2016 by Ben Marto

I have approx 8500 gal inground pool w/spa. How many BTU's (Electric Heat Pump ) do you recommend . I live in Florida. Thank you.
 Reply

A  Answered on 11/7/2016 by InyoPools Product Specialist Adam Y.

Good Afternoon Ben, The Hayward Heat Pro Heat Pump 95,000 BTU - HP21004T would be a great heatpump for you for the size of your pool. It has a great warranty at a great price.
 Reply


?     Asked on 11/2/2016 by sam mayhue

How much extra would adding 2 more years on the warranty or do you offer extended warranty plans. Thanks
 Reply

A  Answered on 11/2/2016 by InyoPools Product Specialist Scott W.

Unfortunately, we do not offer extended warranties.
 Reply


?     Asked on 11/2/2016 by sam mayhue

I have just installed a 16 x 40 freeform inground fiberglass pool. . After this winter (I live in NW arkansas) up close to Missouri border, I will be installing a retractable telescoping pool cover/house made of 8 -10 mm thick lexan. It should keep it 15-20 degrees warmer. Would this be a good unit until the cover is installed . Just trying to get as many professional opinions as I can before purchasing. Also, I noticed a few places have the 120 K units cheaper than the 95 k Units, Any idea why.
 Reply

A  Answered on 11/2/2016 by InyoPools Product Specialist Scott W.

The climate you live in I really would not recommend a heat pump less than the 125k btu model. Even then, I would recommend a heater over a heat pump for the climate you live in. Also, with your pool being about 16k-17k gallons I would go with at least the 300k either natural gas or propane heater.
 Reply


?     Asked on 10/28/2016 by timothy mead"

hayward model hp21004t heat pump is it round or square?
 Reply

A  Answered on 10/28/2016 by InyoPools Product Specialist Adam Y.

Hello Timothy, The Model Hayward Heat Pro Heat Pump 95,000 BTU - HP21004T Is Square.
 Reply


?     Asked on 10/23/2016 by sudheer

this is heating only or heat and cool?? i need heat and cooling pump.heating capacity.25 kw 86000.BTU/H cooling capacity 17 kw, 59500 BTU/H. Which model we can use.the pool size is 12*5*1.10 kids pool size is= 3*3.30 heating capacity 13 kw, 4400 BTU/H Cooling capacity 8.8 kw, 30000BTU/H. PLEASE SUGGEST ME ......WHICH PUMP WE CAN USE... THANK YOU
 Reply

A  Answered on 10/24/2016 by InyoPools Product Specialist Adam Y.

Sudheer, If you are looking for a pump that heats and cools check out AquaCal Ice Breaker SuperQuiet Heat Pump Heat Cool 110,000 BTU's - SQ120R
 Reply


?     Asked on 10/7/2016 by Kim

Can this unit run on a 40 amp breaker (I see that 50 amp is recommended.)
 Reply

A  Answered on 10/10/2016 by InyoPools Product Specialist Lennox H.

Hi, Kim. A 40 amp breaker will not be sufficient for this unit, the manufacturer requires a 50 amp breaker.
 Reply


?     Asked on 9/10/2016 by excelle

I have a 21Ft above ground pool, I am looking for the right electric heater for our pool. we don't have gas/propane line thanks
 Reply

A  Answered on 9/11/2016 by InyoPools Product Specialist Stacey M.

Hello, these are solar options that don't need propane or NG, http://www.inyopools.com/heaters_solar.aspx
 Reply


?     Asked on 9/9/2016 by carole

is this heat pump for a salt water pool?
 Reply

A  Answered on 9/16/2016 by InyoPools Product Specialist Alan M.

This heat pump can be installed with a satl water pool. I would recommend that when installing the heat pump, a bypass valve is installed as well to bypass the unit when it is not in use.
 Reply


?     Asked on 9/6/2016 by steve

Hello, I see they recommend the 50K btu heater for AG pools. I would like to heat the water quicker so I was thinking of this 95K btu heater, but they say it is designed for inground pools why? and can i use on my above ground pool?
 Reply

A  Answered on 9/6/2016 by InyoPools Product Specialist Scott W.

You can use on an above ground pool just as long as you can get power to it from at least a 50 amp breaker.
 Reply


?     Asked on 8/9/2016 by Dan

Purchasing a home with 10-12k inground pool. What would be the correct size Heat pump BTU. Please note the home is in Mesa, AZ Thanks
 Reply

A  Answered on 8/10/2016 by InyoPools Product Specialist Scott W.

Yes, that unit would work for what your set up is. I don't know if you're in the desert in Mesa, but I know when I lived in the desert in Coachella Valley it was nice to have an ice breaker as well for the super hot summers. When I didn't have the ice breaker during the summer it was like swimming in a hot bath. Just a suggestion.
 Reply


?     Asked on 8/9/2016 by Dan

Purchasing a home with 10-12k inground pool. What would be the correct size Heat pump BTU. Please note the home is in Mesa, AZ Thanks
 Reply

A  Answered on 8/10/2016 by InyoPools Product Specialist Scott W.

That unit would work for your set up. I don't know if Mesa is in the desert, but if it is I'd recommend looking into a heat pump that has an ice breaker as well. I use to live in Coachella Valley in southern California where it's 120 degrees everyday in the summer. Before I got my ice breaker I'd get in the pool and it would feel like jumping into a hot bath. If wasn't refreshing at all. Just a suggestion.
 Reply


?     Asked on 8/9/2016 by Mike

I have a 12 x 24 ft with average depth of 4,5 ft in ground located in Grand Cayman where the temp is very similar to S Florida if you dont know it and is humid. Looking to heat it from Oct to Mar roughly. Looking for a few options for such a size. Please include units that have low decibels and also those with cooling capacity for summer. How effective is the liquid blanket? Many thanks
 Reply

A  Answered on 8/9/2016 by InyoPools Product Specialist Scott W.

Good afternoon Mike,I would recommend the AquaCal Ice Breaker/Heat Pump, part number SQ120R. I use to live in Coachella Valley, in the desert, and had that unit. With the extremely hot summers the ice breaker was amazing and in the somewhat cool winters the heat pump was great. I paired that with a cover to trap the heat so I wouldn't have to run the heat pump as much. As far as the liquid cover, the advantages of it is that you don't have to take off the cover every time you want to use the pool and it's a cover without you actually seeing the cover so it looks good. The disadvantages are that you have to add the solution weekly and I haven't found that it works as well as the actual cover. I hope this answers your questions, but if you have any further questions don't hesitate to email me back.
 Reply


?     Asked on 7/20/2016 by Steve

Would you recommend the HP21004T or the HP 21404T? We live near Raleigh, NC, and have a 24" above ground pool, 4' deep. We like the water to be about 85 degrees. Also, do you require an electrician approved by Hayward to do the complete install or can I do it myself. Or can I at least run the wires underground and hire an electrician to install the breaker box in my main panel, with me doing the rest? Thanks
 Reply

A  Answered on 7/21/2016 by InyoPools Product Specialist Scott W.

I'd recommend the HP21104T, which is the 110,000 BTU model, for the size of pool you have and the location you live in.
 Reply


?     Asked on 6/28/2016 by Dave

Have a 12000 gallon pool 24x12x5.25x5.9 oval above ground flow rate appox 27GPM will the flow rate be enough for the heat pump.Running a Hayward power-flo matrix 1.5 hp so the gpm is a rough guess?
 Reply

A  Answered on 7/3/2016 by InyoPools Product Specialist Lennox H.

Hi Dave, This unit requires a minimum of 32 gpm so you will need to increase the hp of the pump. With a sufficient flow rate this unit will heat your size pool.
 Reply


?     Asked on 6/4/2016 by Dave

what size heat pump will I need for my 16x32x48" above ground pool? we live near South Bend IN
 Reply

A  Answered on 6/10/2016 by InyoPools Product Specialist Lennox H.

Hi Dave, The 95,000 BTU-HP21004T or 110,000 BTU-HP21104T will be sufficient for you size pool.
 Reply


?     Asked on 5/30/2016 by James

I only have a 30 amp breaker with 10 gauge wire can this unit run on that configuration. your specification sheet indicates you need a 50 amp breaker? if this will not work what unit would you suggest ?
 Reply

A  Answered on 5/30/2016 by InyoPools Product Specialist Patrick P.

Hi James, For a 30 amp breaker with 10 gauge wire we would suggest the Hayward 50,000 BTU Heat Pump.
 Reply


?     Asked on 5/23/2016 by eddie

I have a 24 foot round pool 54" deep w/ a 1.5 hp Hayward pump but the lines are 1.5 pvc. will it work with this heat pump?
 Reply

A  Answered on 5/23/2016 by InyoPools Product Specialist Patrick P.

Hi Eddie, Yes this heat pump will work with the set up you explained you will need to get two 1.5" x 2" pvc fittings which should cost you less then a dollar at a hardware store.
 Reply


?     Asked on 5/10/2016 by

Has there been any known issues with connecting it to a GFCI breaker?
 Reply

A  Answered on 5/12/2016 by InyoPools Product Specialist Alan M.

For the installation of this heat pump, you will need a dedicated 50 amp breaker. I have no information at my disposal to adequately answer your question. You will need to contact directly at 1-908-355-7995 with any modifications to the standard wiring procedure.
 Reply


?     Asked on 5/1/2016 by Rick Kerrigan

I currently have a Hayward 65000 BTU heat pump heating my above ground 24' round pool (13000 gallons). The 65000 is a little slow heating the pool (I live in Pennsylvania). I would like to heat it faster. I need to replace it because it is damaged. Is the Hayward 125000 to big for this pool or should I go with the 95000
 Reply

A  Answered on 5/2/2016 by InyoPools Product Specialist Alan M.

The 95,000 BTU Hayward Heat Pro will definitely heat your pool faster than the current heater you have. The larger BTU units (110,000 HP21104T or 125,000 HP21254T) will heat the pool faster depending on their sizes, which means less run time and energy consumption the higher up you go. Any of these units will work for your pool.
 Reply


?     Asked on 4/23/2016 by

is this big enough for 13000 gallon in ground pool
 Reply

A  Answered on 4/24/2016 by InyoPools Product Specialist Lennox H.

Hi, This unit can be used to heat a 13,000 gallon pool.
 Reply


?     Asked on 4/23/2016 by Kevin

We are looking for an electric water heater pump. We live in Louisiana where humidity is made and our pool is 33 L x 18 W x 5.5 D, approximately 24,500 gallons of water. What size heat pump would we need? Thanks!
 Reply

A  Answered on 4/25/2016 by InyoPools Product Specialist Lennox H.

Hi Kevin, For your size pool I would recommend the HP21254T or HP21404t.
 Reply


?     Asked on 4/18/2016 by Lenny

I'm looking for an electric heater that is functional for a 20x40 36,000 gallon in ground pool. What unit should I consider looking into?
 Reply

A  Answered on 4/18/2016 by InyoPools Product Specialist Lennox H.

Hi Lenny, For your size pool I would recommend the HP21404T unit.
 Reply


?     Asked on 4/13/2016 by Bruce

What gauge wiring is required for this heat pump .......95000 btu?...and the breaker?
 Reply

A  Answered on 4/14/2016 by InyoPools Product Specialist Lennox H.

Hi Bruce, This unit requires a 50 amp 230 volt breaker. The gauge wire would be determined by the run from the breaker to the unit. The licenses electrician will have to make that calculation.
 Reply


?     Asked on 4/13/2016 by Rick

What is the min clearance on top of unit to allow for an overhang?
 Reply

A  Answered on 4/13/2016 by InyoPools Product Specialist Lennox H.

Hi Rick, A minimum of 72" of unrestricted clearance is required above this unit.
 Reply


?     Asked on 3/26/2016 by Bob

Can your pool heaters run on 140 volts.
 Reply

A  Answered on 3/28/2016 by InyoPools Product Specialist Lennox H.

Hi Bob, This unit can not run off of 140 volts. You will need a 50 amp 240 volt breaker to operate this unit.
 Reply


?     Asked on 3/26/2016 by Jim

Hayward heat pump HP21004T. Is it 110 Or 220
 Reply

A  Answered on 3/28/2016 by InyoPools Product Specialist Lennox H.

Hi Jim, This unit is 240 volts.
 Reply


?     Asked on 3/12/2016 by Karl

I have a 21 foot round pool and I live in Chicago...will a 50,000 BTU be good enough for my needs?
 Reply

A  Answered on 3/17/2016 by InyoPools Product Specialist Lennox H.

Hi Karl, A 50,000 BTU heat pump will heat your pool, but this 95,000 BTU unit will heat it much faster. It all depends on what you prefer.
 Reply


?     Asked on 3/10/2016 by Brian

Will the warranty be in place if I buy the heat pump, (95000 BTU) and have it installed by a certified/licensed Electrician and plumber? The pool companies around here will not install unless I buy from them and jack the price up for installation and purchase.
 Reply

A  Answered on 3/11/2016 by InyoPools Product Specialist Andy O.

Brian- The warranty will still be valid as long as a licensed and insured installer does the install on this unit.
 Reply


?     Asked on 2/23/2016 by Kent

Does the warranty cover a self install or does it need to be installed by a licensed dealer/electricial? Thanks for your help.
 Reply

A  Answered on 2/24/2016 by InyoPools Product Specialist Lennox H.

Hi Kent, This unit has to be installed by a licensed and insured company authorized by Hayward.
 Reply


?     Asked on 2/17/2016 by Miguel

I live in Brooksville Florida and I have an in ground pool 18 x 36 x 4 to 8 ft deep. What size heat-pump would I need to keep my pool at 82 degrees
 Reply

A  Answered on 2/17/2016 by InyoPools Product Specialist Megan C.

Hello, Miguel. The Hayward Heat Pro Heat Pump 140,000 BTU (PART# HP21404T) is my best recommendation, click here to view. I also suggest the use of a Liquid Solar Blanket (click here to view) or a Solid Solar Blanket (click here to view) in conjunction with the heat-pump. The use of a solar blanket will prevent evaporation to help reduce heat loss.
 Reply


?     Asked on 9/3/2015 by Bob

I live on Long Island New York...would like to use pool from May 1st to September 30...I have a 20 ft round 52" deep above ground pool...Like pool water to be 85 degrees... covered and Moderate shade...What type of Heat Pump necessary for my needs...I was looking at the HP50TA...Thanks
 Reply

A  Answered on 9/7/2015 by InyoPools Product Specialist Lennox H.

Hi Bob, The Hayward Heat Pro Heat Pump 50k BTU (HP50TA) would be sufficient  for your size pool but the Hayward Heat Pro Heat Pump 95,000 BTU would heat the pool faster.
 Reply


?     Asked on 6/25/2015 by Daryll

I bought the hp21004t from you. I've been calling around to get it installed. Either no one installs heat pumps, or they won't install it cause I didn't buy it from them. Do you have anyone you could recommend? I live on Long Island NY
 Reply

A  Answered on 6/25/2015 by InyoPools Product Specialist Joe S.

Hello I would check with haywards Dealer finder  or call them at 908-351-5400 they will be able to assit you with an installer in your area.
 Reply


?     Asked on 6/1/2015 by

I have 40amp service at pool, can I use Hayward 95,000 btu 50 amp ?
 Reply

A  Answered on 6/1/2015 by InyoPools Product Specialist Patrick P.

Unfortunately you would not be able to use this heat pump on a 40 amp breaker. The HP50TA Heat Pump could be run on a 40 amp breaker.
 Reply


?     Asked on 5/28/2015 by jim

can this unit run with 40 amps? I have 40 amps going out to the pool
 Reply

A  Answered on 5/28/2015 by InyoPools Product Specialist Lennox H.

Jim, A 50 amp breaker is required by the manufacture for this Hayward Heat Pro Heat Pump 95,000 BTU.
 Reply


?     Asked on 5/22/2015 by

I ordered this pump from you thinking it would be round but it is square. The square one is bigger. Does the square one have any different features or qualities than the round one besides the size and shape? Is it an older model?
 Reply

A  Answered on 5/23/2015 by InyoPools Product Specialist Alex V.

Hello, The HP21004T Hayward heat pump is a round model as pictured. There is no difference feature wise compared to the square models.
 Reply


?     Asked on 5/10/2015 by

What is the nominal: 1. noise level 2. current draw (amps) for both 65,000 BTU and the 95,000 BTU models. I need to check if my existing circuit can handle.
 Reply

A  Answered on 5/10/2015 by InyoPools Product Specialist Patrick P.

Here is the information you requested.... For the Hayward 95,000 BTU Heat Pump... Minimum Circuit Amps: 36 amps. Minimum Overload Protection: 50 Amps & Maximum Overload Protection: 60 Amps. For the 65,000 BTU unit Minimum Circuit Amps: 24 amps. Minimum Overload Protection: 40 Amps & Maximum Overload Protection: 40 Amps. I don't have the decibel ratings for either of these heat pumps but they sound like your standard home air conditioning unit.
 Reply


?     Asked on 4/25/2015 by Ken

Can I program it to run only at night?
 Reply

A  Answered on 4/25/2015 by InyoPools Product Specialist Alex V.

Ken, Depending on the outdoor temp at night, it may not be possible to run the heat pump at night. The heat pump needs humidity to heat the water. Typically, you would want the heat pump to run during the day and use a solar blanket at night to help retain the heat.
 Reply


?     Asked on 9/11/2014 by Guest

Can I install this heat pump inside an equipment room?
 Reply

A  Answered on 9/11/2014 by InyoPools Product Specialist Patrick P.

Unfortuantely Hayward does not recommend installing the heat pump indoors.
 Reply


?     Asked on 10/8/2013 by Guest

Is the refrigerant in Hayward heat pumps environmentally safe?
 Reply

A  Answered on 10/8/2013 by InyoPools Product Specialist Patrick P.

Yes. Hayward uses R-410A refrigerant in all their heat pumps.
 Reply


?     Asked on 10/8/2013 by Guest

Can a heat pump be installed under a deck?
 Reply

A  Answered on 10/8/2013 by InyoPools Product Specialist Patrick P.

No. Any installation that causes the air being discharged from the top of the heat pump to be recirculated back into the heat pump will cause a loss of capacity and efficiency in the heat pump. Installation of a heat pump under a deck, or a low over hang will allow the air being discharged to be drawn back in by the heat pump.
 Reply


?     Asked on 10/8/2013 by Guest

Can a heat pump be installed indoors?
 Reply

A  Answered on 10/8/2013 by InyoPools Product Specialist Patrick P.

Generally no. Heat Pumps work by transferring heat from the surrounding air to the pool water. If a heat pump is installed indoors there must be a continuous supply of warm air from which the heat pump can extract heat. If you must heat the air in the room before the heat pump can extract that heat to heat the pool, there would be no benefit to the heat pump.
 Reply


?     Asked on 10/8/2013 by Guest

If I have a large pool pump will I need to have a flow meter for the heat pump?
 Reply

A  Answered on 10/8/2013 by InyoPools Product Specialist Patrick P.

According to Hayward their heat pumps have a flow rate range of 30 to 70 GPM, with an optimum flow rate of 45 GPM. If your pump is capable of significantly more flow than this, a flow meter is recommended to insure the flow rate is within the prescribed range.
 Reply


Top
Difficulty

Est. Repair Time

4 to 8 hrs

Tools Needed

Screwdriver, Pliers, Socket Set, saw to cut pipe

1     0

No problem

Written on 11/5/2018 by Guest

Installed with a homeowners plumbing permit.

Were these instructions helpful? 
 

Top

Review Summary

 (Average 4.5  out of 5 stars)
4 Rating
5 star:
 
(2)
4 star:
 
(2)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)

The Most Helpful Review


The Most Recent Reviews