Model # SP1084
Hayward 1084 Series Pool Skimmer for Vinyl/Fiberglass In-Ground Pools
The Hayward Auto-Skim Series is molded of rugged, non-corrosive ABS and has no joint below water level. The Auto-Skim feature a cover collar allowing 1 1/2" vertical adjustment and a snap-in-weir that automatically adjusts to 4 1/2" variation in water level. An optional float/by-pass valve is available. The auto-Skim can be used in either Residential or Commercial applications. Add an optional float valve and equalizer with a NSF approved cover to any Auto-Skim with a square cover to accommodate commercial requirements.
Skimmer cracked and leaking water below intake level. How to I remove and replace the skimmer
Hi, Rachel. Removing and replacing an inground pool skimmer requires digging up your deck.
There is a 3/8"(approx) hole between the two 2" threaded openings, what is this for? thanks
One is the main drain for the skimmer and the other is for if you want to connect a suction side cleaner into the skimmer.
does the sp1084 skimmer have a drain hole on the backside to release water out of the pool?
Ben, The skimmer does not have a drain on the back.
Is sp1084 skimmer the same size as sp1075-a
Hi Willie, This skimmer can be used as a replacement for a vinyl or fiberglass surface pool, however, it will not be an exact drop in replacement.
Does the 1084 come with gaskets and face plate
Charles, Yes the gasket and face plates is included with the complete skimmer.
The optional float by pass valve, what is it and how much does it cost?
The optional float / by-pass valve provides a main-drain thru skimmer system plus an automatic safety by-pass for low water conditions. You may purchase the float valve assembly through this link http://www.inyopools.com/Products/07501352017468.htm