Model # H2001
By Hayward Pool Products
Model # H2001
The Hayward H-Series heater represents the very latest in heating technology for swimming pools and spas. H-Series heaters are easy to install and maintain, thanks to its low profile, light weight and CPVC plumbing capabilities.
Rust resistant water path, with injection-molded polymer header, offers improved by-pass control and extended life by providing additional protection from the damaging effects of erosion from high flow conditions.
Heat exchanger reliability is improved due to the reduction of condensation hat can form on tubes. Exclusive CPVC plumbing kit allows for universal heater replacement and maximum plumbing versatility.
Our patented single header "V" baffle design heat exchangers allow for long life, fast heating and virtually no condensation. All Hayward heat exchangers are now protected with highly resilient Cupro Nickel for greater durability and longevity.
Constructed of tough, durable stainless steel, H-Series burners can be removed individually or as a complete unit for easy maintenance and cleaning.
H-Series Thermal Efficiency Rating = 83%
1 year parts and labor limited warranty for single family residential users
What is in the box when I buy it. Do I need to buy housing nipples and othet materials to be able to install?
Reply
Hi Galin, Yes an installation kit is included with this Hayward heater when you purchase it from us, this installation kit includes the nipples, unions and o-rings. You would need to purchase locally any of your basic plumbing materials like pvc pipe, pvc fittings and glue.
Reply
Can I get a conversion kit to LP for my h2001 heater? I also need to find a manual.
Reply
Hi, Paul. The conversion kit is p/n HAXCNK0001, click link > Hayward H-Series Heater Owner's Manual to download the manual.
Reply
Hayward h200 pool heater seems high winds blows pilot light out and also hard to light runs good when pilot light is on I have had it four 10 years should I do a tune up on it and do they sell a kit
Reply
Hi, Mike. Replacement parts for this unit are listed on the Hayward H Series and H Series ED1 parts page.
Reply
Where can my heater be installed?
Reply
There are specific venting requirements and clearance distances that must be met to ensure proper operation. Consult the owner’s manual for exact specifications for your model of heater.NOTE: Gas fired heaters should be diagnosed and repaired by trained personnel.
Reply
What is the difference between an Electronic and Millivolt ignition?
Reply
The basic answer is that Millivolt is the old style of ignition, using a standing pilot light. While the electronic ignition uses a spark start system like a gas grill. Electronic ignitions are more efficient in gas usage and also are better suited for high wind areas where a pilot light might get extinguished.
Reply
Will a gas heater operate at the low speed of a dual speed motor?
Reply
Probably not - Most gas heater will shut off at low GPM levels (20-40) to keep the heater cores from overheating - 20 for 200 BTUs, 40 for 400 BTUs. Depending on your pool system you might get these GPM levels at the low speed but generally these heaters must be run at the motor's high speed.
Reply
How do you know if a pool heater is a propane heater or a natural gas heater?
Reply
Typically in the product name we use the abbreviation of "LP" for propane or "NG" for natural gas. Click here for a full listing of our >Pool Heaters.
Reply