?     Asked on 12/29/2011by Guest

How do you know if a pool heater is a propane heater or a natural gas heater?
 Reply

A  Answered on 12/29/2011 by InyoPools Product Specialist Patrick P.

Typically in the product name we use the abbreviation of "LP" for propane or "NG" for natural gas. Click here for a full listing of our >Pool Heaters.
 Reply


?     Asked on 1/16/2012by Guest

Will a gas heater operate at the low speed of a dual speed motor?
 Reply

A  Answered on 1/16/2012 by InyoPools Product Specialist Patrick P.

Probably not - Most gas heater will shut off at low GPM levels (20-40) to keep the heater cores from overheating - 20 for 200 BTUs, 40 for 400 BTUs. Depending on your pool system you might get these GPM levels at the low speed but generally these heaters must be run at the motor's high speed.
 Reply


?     Asked on 10/10/2012by Guest

What is the difference between an Electronic and Millivolt ignition?
 Reply

A  Answered on 10/10/2012 by InyoPools Product Specialist Patrick P.

The basic answer is that Millivolt is the old style of ignition, using a standing pilot light. While the electronic ignition uses a spark start system like a gas grill. Electronic ignitions are more efficient in gas usage and also are better suited for high wind areas where a pilot light might get extinguished.
 Reply


?     Asked on 10/18/2012by Guest

What is the elevation rating for the Hayward H-Series Low Nox Heaters
 Reply

A  Answered on 10/18/2012 by InyoPools Product Specialist Patrick P.

Per Hayward, the Hayward H-Series Low Nox Heaters have an elevation rating up to 7,700'
 Reply


?     Asked on 10/8/2013by Guest

Where can my heater be installed?
 Reply

A  Answered on 10/8/2013 by InyoPools Product Specialist Patrick P.

There are specific venting requirements and clearance distances that must be met to ensure proper operation. Consult the owner’s manual for exact specifications for your model of heater.NOTE: Gas fired heaters should be diagnosed and repaired by trained personnel.
 Reply


?     Asked on 5/17/2017by Mike

Hayward h200 pool heater seems high winds blows pilot light out and also hard to light runs good when pilot light is on I have had it four 10 years should I do a tune up on it and do they sell a kit
 Reply

A  Answered on 5/19/2017 by InyoPools Product Specialist Lennox H.

Hi, Mike. Replacement parts for this unit are listed on the Hayward H Series and H Series ED1 parts page.
 Reply


?     Asked on 6/21/2017by Paul

Can I get a conversion kit to LP for my h2001 heater? I also need to find a manual.
 Reply

A  Answered on 6/21/2017 by InyoPools Product Specialist Lennox H.

Hi, Paul. The conversion kit is p/n HAXCNK0001, click link > Hayward H-Series Heater Owner's Manual to download the manual.
 Reply


?     Asked on 5/23/2018by Galin

What is in the box when I buy it. Do I need to buy housing nipples and othet materials to be able to install?
 Reply

A  Answered on 5/23/2018 by InyoPools Product Specialist Patrick P.

Hi Galin, Yes an installation kit is included with this Hayward heater when you purchase it from us, this installation kit includes the nipples, unions and o-rings. You would need to purchase locally any of your basic plumbing materials like pvc pipe, pvc fittings and glue.
 Reply