Frame & Cover 7 7/8" 2 Pack - GRAY - WG1030AVGRPAK2

$42.79

IN STOCK
FREE SHIPPING

Model # WG1030AVGRPAK2

By Hayward Pool Products


Details

Top

Model # WG1030AVGRPAK2

Product Description

Hayward Main Drains and Covers

Hayward covers safety with variety and style. New safety suction outlets meet all federal requirements.For concrete or vinyl/fiberglass pools, Hayward NSF listed suction outlets are available in a wide range of styles and sizes to satisfy any installation requirement. Whether you install frame and covers, for residential or commercial pools, or sump-type outlets, Hayward suction outlets set the standard in quality and value.

Legislation leads to performance enhancements:

Two major changes in the pool industry address the enhanced performance requirements for pool safety.

  1. The American Society of Mechanical Engineers (ASME) has released ANSI/ASME A112.19.8 – 2007 Suction Fittings for Use in Swimming Pools, Wading Pools, Spas and Hot Tubs. The revisions for this standard include testing of outlet covers to prevent hair entanglement, body entrapment, and finger entrapment as well as improved Ultra Violet (UV) stability of outlet covers.
  2. The Virginia Graeme Baker Pool and Spa Safety act promotes the safe use of pools, spas and hot tubs by imposing mandatory federal requirements for suction entrapment avoidance. Effective December 20, 2008 the Act will be administered by the U.S. Consumer Products Safety Commission (CPSC).*

What do the mandatory federal requirements mean?
Specifically, the mandatory federal requirements are as follows:

  • By December 20, 2008 each swimming pool or spa drain cover manufactured, distributed or entered into commerce in the United States shall conform to the ANSI/ASME A112.19.8 2007 Suction Fittings for Use in Swimming Pools, Wading Pools, Spas and Hot Tubs published by ASME. Compliance with this standard will be enforced by the CPSC as a consumer product safety rule.
  • Hayward WG Series Suction Outlet products comply with provisions of the ANSI/ASME A112.19.8 – 2007 standard and the Virginia Graeme Baker Pool and Spa Safety Act.

It is important to determine if a drain cover is compliant with the requirements.
Hayward drain covers compliant with the new standard will have ANSI/ASME embossment on each drain cover to indicate it is compliant.

Product Specifications

Cover Size:
7 7/8 in.
Color:
Gray
Top

?     Asked on 9/12/2017 by Bob Roche

I need a ring and cover. I found this number on the ring wg1048b also 250pm submbpegd was very hard to read. Can you help?
 Reply

A  Answered on 9/12/2017 by InyoPools Product Specialist Lennox H.

Hi, Bob. The replacement cover and ring are listed on the Hayward Round Main Drain Parts page. 
 Reply


?     Asked on 6/18/2017 by Tony

Do you offer a drain cover with a lower profile?
 Reply

A  Answered on 6/19/2017 by InyoPools Product Specialist Lennox H.

Hi, Tony. Hayward does not have a lower profile cover.
 Reply


?     Asked on 7/10/2016 by Jimmy Nguyen

Do you have the same cover in white color? Thank you.
 Reply

A  Answered on 7/11/2016 by InyoPools Product Specialist Alan M.

Yes, here is the link to the Frame & Cover 7 7/8" 2 Pack - WHITE.
 Reply


?     Asked on 4/1/2016 by Terry Willis

what is the gpm for the Model WG1030 AVG and life expectancy
 Reply

A  Answered on 4/1/2016 by InyoPools Product Specialist Lennox H.

Hi Terry, The WG1030 cover is rated 125 GPM Flow Floor (Horizontal) and 72 GPM Floor Wall (Vertical) installation. This item does not have a life expectancy.
 Reply


?     Asked on 5/11/2015 by Anwar

I am looking for a spa drain cover
 Reply

A  Answered on 5/12/2015 by InyoPools Product Specialist Lennox H.

Can you provide the manufacturer, model number and size spa drain cover you're looking for.
 Reply


?     Asked on 9/25/2012 by Guest

my installer says I need a whole new main drain including a sump. Does this product come with the sump?
 Reply

A  Answered on 9/25/2012 by InyoPools Product Specialist Patrick P.

No, this product does not come with the sump. If you need a new main drain with the cover, frame and sump included in this style you should review the following pages WG1051PAK2, WG1052AVPAK2, WG1053AVPAK2, or WG1054AVPAK2.
 Reply


?     Asked on 9/24/2012 by Guest

Does this cover have VGB compliant marked on the top? My inspector is adamant that I need one of these covers and I want to make sure he can see that I am up to code.
 Reply

A  Answered on 9/24/2012 by InyoPools Product Specialist Patrick P.

Yes, this cover does have the VGB label on it top and its service date for when you would need to replace it.
 Reply


?     Asked on 8/27/2012 by Guest

I am replacing an existing main drain cover and this one has the correct diameter measurement of 7-7/8". But I need to know the center to center measurements for the screw holes.
 Reply

A  Answered on 8/27/2012 by InyoPools Product Specialist Patrick P.

Thank you for the great question. The center-to-center measurement for this Main Cover screw holes is 6".
 Reply


Top

Review Summary

 (Average 0  out of 5 stars)
0 Rating
5 star:
 
(0)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)