PER THE MANUFACTURER: THIS ITEM IS NOT AVAILABLE FOR SALE ONLINE
Model # AQLP4
Alternate Part #'s GLD-30-660, GOLPL-P-4, HPPPLP4, PLP4
Aqua Logic P4 Controller Only
We are looking to replace an Aqua Logic Controller using 2.01 firmware which we understand does not work with Hayward Aqua Connect. Does this controller have the updated GLD PCB PRO board? Thank you!
Reply
Trish, we apologize for the inconvenience, however, we have been unable to obtain an answer to this question from the manufacturer. We suggest contacting Hayward directly for an answer to this.
Reply
Does it contain all the boards. will it work with my existing t15 salt cell. I have a 14 yr old aqua logic AQL-P-4 and it is on it's 3rd main board. My display= 3.10
Thanks Bob Sherlock
I will order as soon as I get an answer. Thanks.
Reply
Hello Robert, yes the AquaLogic P4 Controller Only - AQLP4 would come with all board and display and new temp sensors. You can reuse your cell and the flow switch.
Reply
2 to 4 hrs
Screwdriver, Nut Drivers, Pliers, Voltmeter
2 0
1. Went to breaker panel and turned the breaker off.
2. Remove the panel front cover
3. Used a volt meter to verify the circuit had no power on both 120vac hot wires.
4. Removed 240 wiring
5. Loosened 4 mounting screws and removed panel from wall
6. Installed new panel box an installed 240vac circuit
7. Transfer wiring from the old box for the inlet temperature for the pool and solar heating panels.
8. Install the heater control valve.
9. Doubled checked wiring
10. Temporarily installed salt cell connector
11. Turned breaker on and programmed panel and verified it powered up an that the heater control worked properly and the cell temperature and pool temperature were working properly.
12. Turned breaker off and removed salt cell cable and install cover panel and plug salt cell back in.
13. Turned breaker on and the system started up with no issues
14. Tightened up screws holding panel to the wall.
15. Closed the door and latched panel
The Most Recent Reviews
(5 out of 5 stars) Great Product
Reviewed By: Jean-Nicolas P. from Gatineau, CA ()
I have been waiting for an automation like this!!
Was this review helpful to you?
(3 out of 5 stars)
Reviewed By: Arthur W. from Lafayette, LA ()
The product is fine, but INYOPOOLS did not send what was ordered. Thye made a substitution
Was this review helpful to you?