Part # P1353ME
Digital Pool/Spa Mechanism
Designed for aftermarket and retro-fit applications, the P1353ME has the ability to program three circuits and snap into almost any Intermatic enclosure. Five pre-programmed modes of operation include single speed pump or two-speed pump and booster/cleaner pump combinations. In addition, programmed modes that include auxiliaries can control pumps up to 3HP as well as underwater, garden and/or fountain lighting. Countdown and Override features allow cycle interruptions when pool/spa service is required. All timing and protection associated with filter pump/cleaner pump combinations and two-speed pumps has already been integrated into the software.
• Single Speed Pump/Booster Pump Combos
• Water Feature Applications
• Two-Speed Pump/Booster Pump Combos
• Garden & Fountain Lighting
• Pool & Spa Lighting
• Landscape Lighting
Key Features Include
• Memory Back-Up
• 120V or 240V Input
• Heater Protection (Fireman Switch)
• LCD Display
• Three On/Off Events per Day per Circuit
• Freeze Protection Probe – 178PA28A (optional)
• Wired Remote – 133PE1484A (optional)
Mode 1 – (Aux1, Aux2, Aux3)
The time switch is a 3-circuit switch with all three switches controlling auxiliary devices.
Mode 2 – (Pump High, Pump Low, Aux3)
The time switch is a 2-circuit switch with the 1st & 2nd switch controlling a 2-speed pump. The 3rd switch is controlling
any auxiliary device. All protection associated with a two speed pump is preprogrammed into this mode.
Mode 3 – (Pump, Aux2, Cleaner Pump)
The time switch is a 3-circuit switch with the 1st switch controlling a single speed pump, the 2nd switch controls
any auxiliary device, and the 3rd switch operates a booster/cleaner pump. All timing & protection associated
with a filter pump/cleaner pump combination is preprogrammed into this mode.
Mode 4 – (Pump High, Pump Low, Cleaner Pump)
The time switch is a 2-circuit switch with the 1st & 2nd switch controlling a 2-speed pump. The 3rd switch is
controlling a booster/cleaner pump. All protection associated with a 2-speed pump and booster/cleaner pump
combination is preprogrammed into this mode.
Mode 5 – (Pump L1, Pump L2, Aux3)
The time switch is 2-circuit switch with the 1st & 2nd switch controlling a 240V pump, where both L1 & L2 are
required to be disconnected when the pump is turned OFF. The 3rd switch is controlling any auxiliary device.
Input Voltage – 120 Volt or 208-240 Volt, 50/60 Hz.
Number of Circuits – Up to three SPST 3HP circuits.
Shipping Weight – 3 lbs
NOTE: The P1353ME will not retro-fit into any enclosure that used stand off posts to attach the mechanism.
Click here for more Intermatic Timers
Do you have an instruction on how to wire a P1353ME to a 230 V 2 speed pump motor? High speed is to control Jacuzzi and low speed is for swimming pool. Thanks.