Model # P1121
Heavy Duty Outdoor Timer P1121 used with pumps with standard 3 prong plug configuration
This Portable Outdoor Timer is specially designed to control the filter pump of a portable pool or spa. They can also be used to turn ON and OFF outdoor decorations, engine block heaters and other appliances - indoors or outdoors. This timer is specifically used for pumps up to 1 Horse Power with a standard 3 prong plug configuration.
Case – 5-1/2” high x 3-1/2” wide x 3” deep
Cord – 3 wire, outdoor grade, 22” long
Timer – 24 hr. with 23-1/2 hr. maximum ON time.
Switch Rating – 15 Amp resistive or tungsten
Agency Approval – CSA/C-US
• Filter Pumps
• Air Conditioners
• Engine Block Heaters
I already have an Intermatic timer for my pool. I am however missing the red and green trippers that turn the timer on and off. Is there any way to order just those?
Hi, This Timer uses the Plastic Tripper-156PB10398A.
can i use a p1121 timer for a 1.5 h.p. pool pump?
Unfortunately this will only work on pumps up to 1 HP. If you have an above ground pool pump then I would suggest our 1.5 HP Above Ground Pool Pump Timer.
How dose this run your pump?
This timer is designed to operate an above ground pool pump which has standard 3 prong plug and is 1 HP or less. The timer plugs into a wall outlet and then the pump plugs into the timer, you set when the pump turns on and off through the timer dial on the front of the timer.
I have a 1 1/2 HP Hayward filter, I need a timer box that I can connect to it. Will this handle it or do you have another timer that might?
This will only accommodate up to 1.0 HP pump. If this is for an above ground pool pump then you could use the following timer SP1500FT http://www.inyopools.com/Products/02200022032590.htm