Model # APURE700
Model # APURE700
Warranty 3 Years
AquaPure is a self contained, compact, sanitizing system which fulfills all of your pools sanitizing needs. The AquaPure system utilizes water softening technology to provide wonderfully smooth and gentle-on-the-body water for swimming. Say goodbye to red, irritated eyes, itchy skin, green hair, chlorine odors and even faded swimsuits.
The next generation AquaPure is the ONLY salt chlorine generator that communicates with the AquaLink RS. The AquaLink RS allows for convenient indoor control and monitoring of chlorine production. Complete control — with a touch of a button.Imagine no longer mixing or storing pool chemicals. You will save money, time and have a safer, more healthful backyard paradise.
Click here for more Jandy Aquapure
My Aquapure cell was producing chlorine on a high percentage but now doesnt produce at all . It is flashing a code 123. Why dont these cells last longer and can they be rejuvenated?
Hello Pete- According to Jandy the Error code 123 means you have low cell current, which is indicative or the cell going bad needing to be replaced.Unfortunately, these cells can not be repaired.
I have a 18,000 gal pool with a jandy salt cell 1400 is the cell too small for my pool.
Hi, The 1400 cell can treat a pool up to 40,000 gallons, it is not too small for your pool. The 700 can only treat a pool up to 12,000 gallons so the 700 will be too small for your pool.
My Agua pure system continues to show "cell reversing" or nothing at all and will not show "Cell Flow"
Hi, You may need to manually clean the cell and check the sensor. The cell cleaning instructions can be found on page 27 of the Jandy Aquapure Owners Manual.
My Agua pure system continues to show service and will not show salt levels or temperature of pool.
This sounds to me as you may have a bad PCB Board many times the cord coming off of the transformer which plugs into the pcb board goes bad as well, so I would check both items. Here is a Thread Showing Pictures of a Bad AquaPure Board and Transformer Plug which may be helpful.
i need to replace my AquaPure APURE 700 two port cell but cant find the replacement part on this site, what do i need to do?
Here is the parts diagram for your unit. Just click here.
I have an 18' x 36' in ground pool. Can I use the AquaPure 700 or the AquaPure 1400?
The AquaPure1400 would be the correct model for your pool. The AquaPure1400 will treat up to 40,000 gallons.
I have a small in ground swimming pool with 18,000 gallons. Will the Jandy AquaPure 700 be sufficient for my pool?
The AquaPure700 will only treat up to 12,000 gallons of water. i would recommend the AquaPure1400.
Do I have to drain my pool to convert to salt if I am using chlorine?
No, you will not need to drain the pool. The salt generator will replace your current chlorine source.
Will the AquaPure stop working in cold weather?
The Jandy AquaPure will stop generating chlorine when the water temperature drops below 50 degrees fahrenheit.
Is the salt included with the salt chlorine generator?
No, salt is not included. You would purchase the salt locally and the quantity will depend upon the number of gallons of water in your pool. Use a salt that is at least 99.8% pure NaCl. The preferred salt is evaporated, granulated, food quality, and NON-iodized. Avoid using salt with anti-caking agents like sodium ferrocyanide, also known as yellow YPS (prussiate of soda). These cause some discoloration of fittings and pool surface finishes. DO NOT use calcium chloride.
I have a pool that is about 10,000 gallons but I am thinking of buying a salt chlorine system for pools up to 20,000 gallons. Would the larger unit be a problem?
It is not a problem to oversize a salt system. It would take the larger unit less time to produce the necessary chlorine so it is actually more efficient. When the pool volume is very close to the capacity of the salt chlorine generator (for example, the pool is 18,000 gallons and the generator is rated at a maximum of 20,000 gallons), we would recommend going up to the next size generator.