Part # K50600
More vacuuming power for ultimate cleaning performance
Kreepy Krauly E-Z Vac Auto Above Ground Pool Cleaner - Complete with 32' Hose Kit
The E-Z Vac is simply the best built above ground cleaner available. Only one moving part for long, dependable service. E-Z Vac is engineered to work in flat-bottomed and dish-shaped pools.
* Superior water-flow for optimum vacuuming power
* One moving part, for long dependable service .
* No wheels or gears to replace or service
* Special valve regulates water flow to assure proper cleaning speed
* True random pattern coverage allows every inch of your pool to be covered
* Installs in minutes
For above ground pools
32' hose included
Suction side cleaner connects directly to skimmer
Easy to assemble - all necessary hardware included
Complete instructions included
Click here for more Kreepy Krauly Pool Cleaners
Soft side pool is 42'. Are there Pentair hose extensions? Does any brand come w/ a hose that long?
Hi Richard, The Pentair EZ Vac cleaner is not recommended for use with soft side pools only hard wall pools. You will have to purchase additional hose p/n K21220, there is not a cleaner that comes with enough to accommodate a pool that is 42' long.
Hoe do i get this vacuum to lay flat on the bottom of pool to ensure a goood clean.
Hi Patty, There are a few steps you can try in the Pentair E-Z Vac Owners Manual like adjusting the hose floats and regulator valve.
Why did this unit suddenly stop going to all areas of my 24' above ground pool? It seems to clean only 2/3 of the pool floor. It keeps going to the same areas after a short while, instead of randomly covering all of the pool floor. I always take the ladder out of the pool, when using it, so that it doesn't,t get stuck on that. The filter/pump is fine and all hoses are air tight.
Hello, Bruce. I would start by checking the hose sections to make sure they are not bent or kinked. It only takes one section to be bent or kinked to hinder the cleaner coverage. You can inspect your hoses by taking them apart and laying them on a flat surface to check and see if they all lay straight. The hose sections should not be curved. Also, the swivel on top of the pool cleaner should turn freely. Check the return jet in the pool and ensure it is still facing down towards the bottom of the pool. It is best recommended when the cleaner is not in use, to disassemble the hose sections, keep them straight and out of sunlight.
How many feet or 44" lengths of hose do i need for a 15' x 32' above ground pool. The E-z Vac comes with 32' of hose which is good for a 25foot pool.
Hi Gilles, Can you let us know the distance from your skimmer to the furthest point away from the skimmer, this would help us determine how many feet of hose you would need.
i need more hose forEZ Vac I have a 33tf pool
We carry Additional EZ Vac Cleaner Hose here.
Does it come with a hose and how long is it? I have oblong pool , I think it is an 18x36
Patty, This cleaner comes with 32ft of hose.
What is the best way to balance the hoses?
Hello, The best way to balance the hose is to make certain that the hose weights are spaced properly.
Is there a complete replacement hose kit for this cleaner?
(4 out of 5 stars) Swimming Pool Cleaner
Reviewed By: Sundown from Cedar Creek,Tx ()
Pros: Easy to operate and works well
Cons: Expensive to replace parts
This is my second cleaner. My first one just kind of wore out after five years. I bought a new one because the replacement hoses are pretty expensive. It's a good product and it's easy to operate.
(3 out of 5 stars) Disappointed
Reviewed By: Amanda M. ()
Cons: Moves very slowly for a few minutes, then stops.
I am familiar with the Kreepy Krauly product, as my parents had one for their inground pool and it worked great for about 10 years. So I was sure this product would be great for my soft-sided above ground pool. I have had no luck getting it to work properly. I have even installed an upraded/high power pump/sand filter to run the skimmer and I still can't get this Kreepy Krauly to move. It sits in the bottom and will move very slowly for a few minutes and then get stuck. I have adjusted the suction from lowest to highest, I've hand cleaned the bottom of any large debris, and I've adjust the location of the hose weight and nothing has worked. I'm very frustrated at this point and hope that I can return this product. Maybe it would work better in a deeper pool, who knows? My pool is a 15'x15' and I was sure it would work, but not so far.