?     Asked on 10/7/2013by Guest

Is there a complete replacement hose kit for this cleaner?
 Reply

A  Answered on 10/7/2013 by InyoPools Product Specialist Patrick P.

Yes, there is a complete replacement hose kit for this cleaner. You can view and purchase the replacement hose kit for this cleaner by clicking here.
 Reply


?     Asked on 12/24/2014by Inyo Visitor

What is the best way to balance the hoses?
 Reply

A  Answered on 12/24/2014 by InyoPools Product Specialist Alex V.

Hello, The best way to balance the hose is to make certain that the hose weights are spaced properly.
 Reply


?     Asked on 4/22/2015by Patty

Does it come with a hose and how long is it? I have oblong pool , I think it is an 18x36
 Reply

A  Answered on 4/22/2015 by InyoPools Product Specialist Lennox H.

Patty, This cleaner comes with 32ft of hose.
 Reply


?     Asked on 5/13/2015by Gilles DiStefano

i need more hose forEZ Vac I have a 33tf pool
 Reply

A  Answered on 5/13/2015 by InyoPools Product Specialist Patrick P.

We carry Additional EZ Vac Cleaner Hose here.
 Reply


?     Asked on 5/15/2015by Gilles DiStefano

How many feet or 44" lengths of hose do i need for a 15' x 32' above ground pool. The E-z Vac comes with 32' of hose which is good for a 25foot pool.
 Reply

A  Answered on 5/16/2015 by InyoPools Product Specialist Patrick P.

Hi Gilles, Can you let us know the distance from your skimmer to the furthest point away from the skimmer, this would help us determine how many feet of hose you would need.
 Reply


?     Asked on 2/27/2016by Bruce

Why did this unit suddenly stop going to all areas of my 24' above ground pool? It seems to clean only 2/3 of the pool floor. It keeps going to the same areas after a short while, instead of randomly covering all of the pool floor. I always take the ladder out of the pool, when using it, so that it doesn't,t get stuck on that. The filter/pump is fine and all hoses are air tight.
 Reply

A  Answered on 3/11/2016 by InyoPools Product Specialist Megan C.

Hello, Bruce. I would start by checking the hose sections to make sure they are not bent or kinked. It only takes one section to be bent or kinked to hinder the cleaner coverage. You can inspect your hoses by taking them apart and laying them on a flat surface to check and see if they all lay straight. The hose sections should not be curved. Also, the swivel on top of the pool cleaner should turn freely. Check the return jet in the pool and ensure it is still facing down towards the bottom of the pool. It is best recommended when the cleaner is not in use, to disassemble the hose sections, keep them straight and out of sunlight.
 Reply


?     Asked on 5/12/2016by patty

Hoe do i get this vacuum to lay flat on the bottom of pool to ensure a goood clean.
 Reply

A  Answered on 5/14/2016 by InyoPools Product Specialist Lennox H.

Hi Patty, There are a few steps you can try in the Pentair E-Z Vac Owners Manual like adjusting the hose floats and regulator valve.
 Reply


?     Asked on 6/25/2016by Richard

Soft side pool is 42'. Are there Pentair hose extensions? Does any brand come w/ a hose that long?
 Reply

A  Answered on 7/2/2016 by InyoPools Product Specialist Lennox H.

Hi Richard, The Pentair EZ Vac cleaner is not recommended for use with soft side pools only hard wall pools. You will have to purchase additional hose p/n K21220, there is not a cleaner that comes with enough to accommodate a pool that is 42' long.
 Reply


?     Asked on 4/30/2019by Inyo Visitor

Does it climb and clean the sides of the pool?
 Reply

A  Answered on 4/30/2019 by InyoPools Product Specialist Lennox H.

Hi. This unit will not climb or clean pool walls. 
 Reply