Model # EC-462029
Warranty Ecommerce (EC) products: Products purchased from an Authorized Pentair Online Reseller (products beginning with EC-) receive a one (1) year (parts only) warranty from the date of purchase. The exceptions are: IntelliChlor cells and IntelliFlo SVRS pumps which receive a two (2) year warranty. EC products are not eligible for the bundled three (3) year extended warranty.
Manufacturer Code 460737
Alternate Part #'s 460737, EC462029, PENEC-462029
The MasterTemp High Performance Heaters offer all the efficiency, convenience, and reliability features you want in a pool heater, plus a lot more. As easy to use as your home heating system, plus, user-friendly indicator lights and troubleshoot icons makes system operations and monitoring a snap. The compact design and super-quiet operation won't intrude on your poolside leisure time.
Features:
Standard copper heat exchanger 84% efficient. Heavy-duty (HD) cupro-nickel heat exchanger 82% efficient.
How much does a new control board cost for a Pentair Mastertemp 400 High Performance Heater. The controls on ours are non-responsive.
the heater is not ignite can you please let me why
Reply
Hi Ray, so there may be a few reasons as to why a heater will not ignite. Please see this blog article that we put together called "The Most Common Swimming Pool Heater Problems" that may assist.
Reply
I have a Pentair Mastertemp 400 propane heater that has failed. Is the Scratch And Dent MasterTemp Heater 400,000 BTU - LP w/ Electric Ignition Low NOx - 460737 an acceptable replacement? What are the main differences?
Hi, Karl. This MasterTemp Heater 400,000 BTU - LP w/ Electric Ignition Low NOx - 460737 is NOT an acceptable replacement because it is NOT ASME. ASME units are designed specifically for commercial use. This unit is recommended for residential use.
Reply
I cannot find information on winterizing this pool heater - #460737.
Reply
Hi, Jerilyn. Winterizing Instructions are located on Page 8 of the Pentair Heater Mastertemp Owners Manual.
Reply
I had a power failure at the house, now my heater has no power. I use the easy touch control system, any suggestions.
Reply
I'd recommend checking continuity going to the Easytouch and to the heater. If you do not have it to the Easytouch then you need to have electrical checked(breaker ect.) If you do but not to the heater then you may need to check the main PCB board at the Easy touch or the heater for failure. Due to electrical, I'd also recommend having a contractor inspect.
Reply
I have Purex Triton Max Model 400 heater for my pool, I can not find such model and I have a problem, when I turn on the heater from my pad inside the house the heater comes on for a few seconds and turns off keeps coming on and off, what could be the problem? can you refer me to a site where I can get some info.
Thanks, Roberto G. Wantland
Reply
Hello Roberto- This could be a much bigger technical issue you are having. I would suggest calling Pentair at 1-800-831-7133.
Reply
Are the Master Temp heaters okay for use with salt water pools?
Reply
Steve- For a salt water pool I highly recommend a Heavy Duty model with Cupro-Nickel. The only one they offer is Natrual Gas Max-E-Therm Heater 400000 BTU Heavy Duty w/ Cupro Nickel NG Ele. Ign. SR400HD.
Reply
Will a gas heater operate at the low speed of a dual speed motor?
Reply
Probably not - Most gas heater will shut off at low GPM levels (20-40) to keep the heater cores from overheating - 20 for 200 BTUs, 40 for 400 BTUs. Depending on your pool system you might get these GPM levels at the low speed but generally these heaters must be run at the motor's high speed.
Reply
The Most Helpful Review
23 6
(5 out of 5 stars) Great Heater
Reviewed By: RDCHIEF from Benson,AZ ()
Pros: NICE SIZE AND HEATER POOL QUICKLY
We are very pleased with this heater. Our pool had been down for a good month and the water temp was at about 50 degrees when we started the heater up and it heater the pool quickly. We started at the 65 degrees and back to the 82 degrees by day 2. Inyo offers great pricing and the shipping cost were reasonable and gave us the option to have a lift truck. I will not hesitate to order from Inyo Pool Products in the future.
Was this review helpful to you?
The Most Recent Reviews
(5 out of 5 stars) Great LP Pool Heater!
Reviewed By: ()
Easy setup. Delivery flawless. Only suggestion; order Pentair mounting kit and pressure relief valve kit with the heater or you'll be trying to get them later for proper installation. Raised 800-gallon spa 30 degrees in 40min.
Response From INYOpools.com: Great recommendation and thank you for the input!
Was this review helpful to you?
1 0
(5 out of 5 stars)
Reviewed By: ()
I am usually hesitant puchasing big items, like this heater, online. With inyopools everything went smooth, the packaging and delivery was professional. It has been 3 years using this heater- works great! Highly recommended.
Was this review helpful to you?
4 0
(5 out of 5 stars) Excellent Heater
Reviewed By: Stewart F. from Osage Beach, MO ()
Heater was easy to install and works great. Price was excellent. Would recommend to anyone looking for a new heater.
Was this review helpful to you?