Part # 340197
Warranty 1 Year
Pentair Dynamo Above Ground Pool Pump
Dynamo® pumps are an example of excellence in hydraulic engineering for that elusive combination of high efficiency and longevity. The key is a proprietary internal design evolved and refined over the past 40 years. The result is the ability to minimize friction and turbulence as water moves through the pump. Other pumps simply work harder, consume more energy and make more noise. By contrast, Dynamo pumps are so efficient they typically require lower horsepower motors to deliver required flow—this slashes energy costs. Superior efficiency also translates directly into quieter operation. Put a Dynamo to work on your pool for maximum performance and value over the long term.
You can depend on Dynamo® aboveground pumps year after year because they are designed to perform and built to last. These pumps feature durable components of fiberglass reinforced thermoplastic to resist corrosion and fatigue for extended service life.
I show that this is the pump that we have for 24 round pool. We pulled the number and information off of our current pump. The only difference is our old pump with this number shows that it is 1.5hp and this shows 1hp. Has this changed or do we need a different pump?
Hi, Donna. The pump hasn't changed, the pump you have is just labeled differently.
I need to replace a pool pump motor. P/N 340197 Dynamo. Please advise what you have to replace it.
I have an 16,000 gal above ground pool with sta-rite T-210WF 200lb sand filter rated at 44usgpm, 35psi. I currently have a sta-rite JWPAS5F-2A4 pump assem. 1 1/2".What pump would you recommend? Also I would like to go up to 240 volt. Thanks, Robert
If you want a 220V pump it'll have to be an inground pool pump. Which isn't a problem, you just have to be able to plumb it properly. If you wanted a recommendation though I would go with part number P6RA6E205L for your current system.
would this pump be a good replacement for a Pentair 1 1/2 Challenger Pump ?
I am using it to pump out ground water under my inground pool , when we have flooding rain.
I have received your dynamo pump 1 hp
part no.340197 the only problem is that the outlet on the impeller housing is to small I need an adapter to make it larger so that the original hose can be screwed on to it. any suggestions
the original hose is larger than the dynamo outlet
You should be able to use a saddle clamp to clamp the hose to a smaller diameter pvc pipe that can insert into the hose itself.
I'm trying to replace a Sta Rite ABG4E-2A4 above ground pump and this pump seems like a good replacement. Is that so?
Yes this model is a good replacement. Keep in mind that if you have specific hose union connections that they may not work and you may need to use standard male threaded nipples to clamp standard above ground hoses to them.