Dynamo Pump 2 HP w/ STD Cord - 340219

$314.99

IN STOCK
FREE SHIPPING

Part # 340219

By Pentair Pool Products

  4.5 Average  

Details

Top

Part # 340219

Warranty 1 Year

Product Description

Pentair Dynamo Above Ground Pool Pump

Dynamo® pumps are an example of excellence in hydraulic engineering for that elusive combination of high efficiency and longevity. The key is a proprietary internal design evolved and refined over the past 40 years. The result is the ability to minimize friction and turbulence as water moves through the pump. Other pumps simply work harder, consume more energy and make more noise. By contrast, Dynamo pumps are so efficient they typically require lower horsepower motors to deliver required flow—this slashes energy costs. Superior efficiency also translates directly into quieter operation. Put a Dynamo to work on your pool for maximum performance and value over the long term.

Features include:

  • Unique diffuser and impeller provide excellent pressure performance across a wide range of desired flow rates— the hydraulic efficiency that keeps operating costs at a minimum.
  • Self-priming design protects internal components and ensures long life.
  • Components are constructed from fiberglass-reinforced material for superior strength, durability and resistance to aging and the elements.
  • Three horsepower ratings available to precisely match up with your pool’s circulation needs.

You can depend on Dynamo® aboveground pumps year after year because they are designed to perform and built to last. These pumps feature durable components of fiberglass reinforced thermoplastic to resist corrosion and fatigue for extended service life.

  • Available in a variety of models to meet your exact requirements—single-speed with cord and on/off switch; single-speed with cord, base and on/off switch; single or two-speed without cord.
  • Every Dynamo pump is performance and pressure tested prior to shipment to ensure superior quality.
  • One-year limited warranty.

Performance Curve

 

Product Specifications

HP:
2 HP
Speed:
Single
Volts:
115 V
Amps:
16
Port Size:
1-1/2 in.
Cord Type:
Standard
Cord Length:
3 foot
Plug:
3 prong
Cord Length:
3 foot ft.
Top

?     Asked on 6/7/2018 by Joe

I have a jacuzzi 1 1/2 motor that is no longer working . I want to move to the 2 hp for above ground pool . Would this work ?
 Reply

A  Answered on 6/13/2018 by InyoPools Product Specialist Lennox H.

Hi, Joe. This Dynamo Pump 2 HP - 340219 can be used if your filter is larger enough to handle the water flow. 
 Reply


?     Asked on 6/1/2018 by Heath

What is the GPM for this pump?
 Reply

A  Answered on 6/8/2018 by InyoPools Product Specialist Andy O.

Hello Heath- The Dynamo Pump 2 HP w/ STD Cord - 340219 has an approximate flow rate of 45 gpm.
 Reply


?     Asked on 5/25/2017 by teddy

Can this pump be changed from vertical to horizontal discharge?
 Reply

A  Answered on 5/25/2017 by InyoPools Product Specialist Patrick P.

Hi Teddy, Yes you can remove the screws on the pump housing to rotate the discharge port making it side discharge.
 Reply


?     Asked on 7/26/2016 by

I need to replace my above ground pool pump. It is a waterway Hi Flo 2HP..would this dynamo pump have the same size connections etc, so that I could switch them out?
 Reply

A  Answered on 8/2/2016 by InyoPools Product Specialist Lennox H.

Hi, The Dynamo Pump will not be an exact replacement for the Waterway Pump, you will have to use different connections or use the Butress Adapter (417-4161).
 Reply


?     Asked on 4/15/2015 by sam

I need a pump with 2HP single phase 110v 2" inlet & outlet Dimension from floor to inlet center inlet 9.5" do you have anything that fit the description above thank you very much
 Reply

A  Answered on 4/15/2015 by InyoPools Product Specialist Brian M.

I believe this Jacuzzi Magnum 2 HP Pump is about as close as we can get. It can run at either 115/230, it has 2" port size and the inlet is 9 3/8" to center.
 Reply


?     Asked on 3/29/2015 by Linda Smith

I need to replace my above ground pool pump. It is a waterco aquamite 2HP..would this dynamo pump have the same size connections etc, so that I could switch them out? I can't seem to find a waterco aquamite. Thanks!
 Reply

A  Answered on 3/30/2015 by InyoPools Product Specialist Robert M.

Hello Linda - The Dynamo pump is not an exact match to the Aquamite. This Dynamo pump has 1.5" female threaded ports. This pump will work with most above ground systems. It may require fittings, flexible hose, and metal clamps.
 Reply


Top

Review Summary

 (Average 4.5  out of 5 stars)
2 Rating
5 star:
 
(1)
4 star:
 
(1)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)