Model # 50290211
By Pentair Pool Products
Model # 50290211
Please note model number 50290211 has been replaced by new Pentair model 263052. New model will be shipped if 50290211 is ordered. Pre-plumbed valves Backwash valves for D.E. & High-Rate 8 In. Centerline Sand Filters. Pre-plumbed Push-pull valves are complete with bulkhead unions for simple installations with filters. Push-pull valves are 2 In. socket. All valves are 100% factory tested. Backwash valve for Eclipse sand filters and original American products filters manufactured before Nov. 1, 1998 For 8 In. Centerline filters only.
Where do you attach the backwash hose
Hi, Tim. The backwash or waste port will vary depending on the type of filter it is used with. The operation of a Sand filter is different from the operation of a DE filter so the waste port will vary. Sand filter the Waste port will be the Top and with DE filters the water port will be the bottom downward port.
I need a new backwash slide valve for an old American Products Titan Vertical Grid Filter Model # 58609000. It has 8" spacing on the inlet/outlets. Will this valve work or can you recommend another valve? thanks...
Hi, Jay. This valve can be used with the American Products Titan Vertical Grid Filter Model # 58609000.
I have a pentair back wash valve,on the handle it says label p/n 98725300, I couldn't find any that matches p/n. My filter is Pentair FNS PLUS FILTERS 60. the push pull valve top already broken from the pin and need replace the value. Please advise replacement part number. Thank you George
Here is the Pentair Push Pull Valves Parts list. The valve handle alone is not available as a replacement part, but a complete handle assembly is.
will this work with an American Titan Vertical Grid filter model #588090 ? Thank you
Hi Robert, This valve can be used with the American Titan Vertical Filter.
hi I have a pac fab nautilsfilter a ns36 model I want to know is abs push valve back wash system will fit on my filter
Hi Frank, The 2 In. ABS Push Pull Valve has been replaced with the Push-pull 8" Center W/union - Black Valve (263052). That valve will not fit your Pac Fab Nautilus NS36 filter.
I have a back wash valve, that I want to to get the replacement assembly, I was told that it is a pentair backwash valve, on the handle it says label p/n 98725300, I couldn't find any that matches p/n. I want to purchase the whole replacement assembly... Thank you George
Hi George, If you can provide us with the model Pentair Filtration system and the size pipe you have I can find the correct replacement Push Pull Valve you will need.
I would like to confirm that this will work with Purex Triton Eclipse PN 58920100? Is there anything different between this and its "new" counterpart PN 263052? I ask because a local pool repair man attempted to repair my valve assembly and stated that the one they were given that was said to work with my system...would not due to dimensions. They are recommending a new filter and valve assembly. I would love to change to DE...just don't want to pay the price at the moment.
The direct replacement 2in push-pull valve for your filter is p/n (4650-1). If you wanted to replace the same Multiport valve you have on your filter the p/n (4650B) would be the direct replacement. For the Push Pull valve you would be getting the (263052). If you have any further questions please email me at firstname.lastname@example.org