I would like to confirm that this will work with Purex Triton Eclipse PN 58920100?
Is there anything different between this and its "new" counterpart PN 263052?
I ask because a local pool repair man attempted to repair my valve assembly and stated that the one they were given that was said to work with my system...would not due to dimensions. They are recommending a new filter and valve assembly. I would love to change to DE...just don't want to pay the price at the moment.
Reply
The direct replacement 2in push-pull valve for your filter is p/n (4650-1). If you wanted to replace the same Multiport valve you have on your filter the p/n (4650B) would be the direct replacement. For the Push Pull valve you would be getting the (263052). If you have any further questions please email me at wes.baxter@inyopools.com
Reply
I have a back wash valve, that I want to to get the replacement assembly, I was told that it is a pentair backwash valve, on the handle it says label p/n 98725300,
I couldn't find any that matches p/n. I want to purchase the whole replacement assembly... Thank you George
Reply
Hi George, If you can provide us with the model Pentair Filtration system and the size pipe you have I can find the correct replacement Push Pull Valve you will need.
Reply
hi I have a pac fab nautilsfilter a ns36 model I want to know is abs push valve back wash system will fit on my filter
Reply
Hi Frank, The 2 In. ABS Push Pull Valve has been replaced with the Push-pull 8" Center W/union - Black Valve (263052). That valve will not fit your Pac Fab Nautilus NS36 filter.
Reply
I have a pentair back wash valve,on the handle it says label p/n 98725300, I couldn't find any that matches p/n. My filter is Pentair FNS PLUS FILTERS 60. the push pull valve top already broken from the pin and need replace the value. Please advise replacement part number.
Thank you George
Reply
Here is the Pentair Push Pull Valves Parts list. The valve handle alone is not available as a replacement part, but a complete handle assembly is.
Reply
I need a new backwash slide valve for an old American Products Titan Vertical Grid Filter Model # 58609000. It has 8" spacing on the inlet/outlets. Will this valve work or can you recommend another valve? thanks...
Reply
Hi, Jay. This valve can be used with the American Products Titan Vertical Grid Filter Model # 58609000.
Reply
Where do you attach the backwash hose
Reply
Hi, Tim. The backwash or waste port will vary depending on the type of filter it is used with. The operation of a Sand filter is different from the operation of a DE filter so the waste port will vary. Sand filter the Waste port will be the Top and with DE filters the water port will be the bottom downward port.
Reply
I am looking for the push/pull valve for Pentair P/N 98725300, any idea where to get one and the cost?
Thanks
Tony
Reply
Hello, If you can provide us with the model Pentair Filtration system and the size pipe you have I can find the correct replacement Push Pull Valve you will need.
Reply