Model # 140210
Warranty 3 Yr. Tank
With Triton II, you'll join satisfied customers worldwide who have made Triton II the world's #1 selling filter.
For More Pentair Filters
My pool pump says it's a Aquatech Corp by Pentair Pool and has a sticker on it that has 140202. The sticker is torn so I can't see any other details of the filter. Do you know what size filter and how many pounds of sand this one is? I'm trying to buy a replacement one and have no idea which to buy. Thanks!!
Hi Keri, I was not able to cross reference the number provide to a specific Pentair model. If you can send us photos along with the tank diameter and height we can find out the size.
Triton tr 100 seriar tr 100 16070 We need the lid, closure , bat we do not Know if it is a butress or V thread
Gladys, we have a blog article that should help you figure out which valve thread type you need, have a look: What Is a V-Thread, Buttress, or Clamp Valve?
hi i have a triton model Tr100 serial. 16070. We changed the sand but the backwash valve is broken Do you have a replacement?
Hi Gladys yes we do have the backwash for your Triton TR100, you would require the 2" Triton TR100 Backwash Valve which you can purchase directly through this link.
How many gallon pool will a Triton II work for? We have a model 140210. Can the valve on the side be converted into a multi position valve such as bottom filter, skimmer filter, backwash filter and both bottom and skimmer?
Hi, The Triton II TR100 Filter Side Mount 30" Tank has a flow rate of 98 GPM. It can handle 47,040 in an 8 hour period. You can use a Multi-port valve based on the size plumbing you have. The Valves can be found via the Pentair Triton 2 Fiberglass Sand Filter Parts.
What is the kit closure for? I have an ancient TR100 that has a 8 1/2" western series dome. The dome is broken and the part is obsolete. The diameter of the lid is 8.5". Could this kit replace the clear dome? Thanks
I called Pentair Technical Assistance ( 800-831-7133 ) and asked them. They said for a filter that is older than 2001, the part number I was given is Pentair 154856 - which is our part number 4600-4856.
part no 15-4871 what size ?
Part no 15-4871 is a 1-1/2" female threaded cap.
When should I change the sand in my filter?
You should change the sand in your filter every 5-7 years. You can generally tell that it is time if your pool water is not as clear as it normally is or when you notice the interval between backwashes is shorter. You can use > this guide to walk you through it.
How many pounds of sand does this filter require?
If you are using all sand, it takes 600 lb. You can also use a mix of 150 lb pea gravel and 450 lb sand.
(5 out of 5 stars) Proper size filter for my pool.
Reviewed By: Pamela G. from Fredericksburg, VA ()
Cons: shipping company "estes" lost my fileter, then found it again.
People at the help center were very helpful. I love the manuals with pictures. Prices better than local pool stores.