Part # PB460
Polaris PB4-60 Booster Pump – .75 HP – PB460 ✅
Use For: Powering Polaris pressure-side pool cleaners at peak performance
Product Overview
The new and improved Polaris PB4-60 booster pump delivers powerful, quiet, and durable operation for your Polaris pressure-side pool cleaner. Specifically engineered for Polaris cleaners, it ensures optimal cleaning efficiency and maximum energy savings when paired with a 2-speed or variable-speed filtration pump.
For over 20 years, Polaris booster pumps have been the benchmark for dependable cleaner performance.
Features
✅ Maximum Efficiency – Ultra-low flow requirements allow operation on the low speed of a 2-speed or variable-speed pump
✅ High-Performance Motor – Ultra-efficient 3/4 HP motor provides reliable power with reduced energy consumption
✅ Improved Design – Redesigned wet end for enhanced durability and performance
✅ Service-Friendly – Quick installation with ergonomic connectors, larger volute seal O-ring, and easy pump seal replacement
⚠️ Compatibility Note – For use only with Polaris pressure-side pool cleaners
➡️ Durable Construction – Heavy-duty one-piece base, captured backplate nut fasteners, and ergonomic drain plug with O-ring
Specifications
Model: PB4-60
Part Number: PB460
Horsepower: 0.75 HP
Voltage: 115/230V
Motor Type: High-efficiency
Application: Booster pump for Polaris pressure-side cleaners
Tech Tips
✅ Pair for Best Results: Always use with a Polaris pressure-side cleaner for maximum cleaning performance.
✅ Energy Savings: Operate on low speed when paired with a 2-speed or variable-speed pump.
✅ Seal Care: Replace the pump seal during routine service to prevent leaks and maintain efficiency.
✅ Winterizing: Drain and store the pump in a dry location before freezing temperatures to extend lifespan.
✅ Check Voltage: Verify your pool system voltage (115V or 230V) before installation.
What is a booster pump, and where does it attach to?
Reply
This cleaner is designated as a pressure side cleaner which means:Pressure Pool Cleaners most pressure cleaners require a booster pump which is typically a ¾ horse power pump that is dedicated for use with the cleaner alone. The booster pump allows you to operate the pressure cleaner without taking any suction away from your main pool pump. The addition of the booster pump does mean pressure cleaners require a more involved installation than either suction or robotic cleaners. The booster pump is installed in tandem with your pool pump.
Reply
I just finished replacing the shaft seal on my booster pump. As soon as I turned the pump on water was leaking from the shaft seal. Is it defective or am I doing something wrong?
Reply
Depending on the model, the installation of a booster pump shaft seal can be slightly different than a pool pump shaft seal. Some booster pump and pool pump shaft seals require that a silicone sealant be used on the outer areas of the metal seat of the shaft seal. The seal will need to be lightly hammered into the body of the pump. You can use a 1 inch PVC coupling or a piece of 1 1/4 inch PVC pipe and a rubber mallet. This procedure will apply to any pool pump or booster pump using a >PS-1000 style shaft seal.
Reply
Can I buy a polaris booster pump with out buying the motor?
Reply
Hi Mike, There is not a pre-assembeled pump housing without the motor be we do carry all of the Parts for the Polaris Booster Pump here.
Reply
Less than 1 hr
Screwdriver, Pliers, Adjustable Wrench
1 0
Our pool is 25 years old. Polaris pump motor was repaired once but lasted only one year. Considering the age of the pump and for simplicity of installation, we decided to replace the pump and motor assembly. Inyo provided all the parts including inlet and outlet connections at pump, flexible hose, clamps required for quick replacement of the pump and motor assembly. Thanks Inyo for making my job easy with all the parts and installation instructions in one package.
Less than 1 hr
Can be done by hand, no tools required for replacing Regulator/relief valve internals.
6 0
LEARN FROM MY MISTAKE!! Before replacing the cleaner booster pump, check the operation of the Regulator Relief valve at the hose connection to the pool. Mine was not functional, guts had been carried away which results in no backpressure. This causes the filter pump and cleaner pump to run full out and cavitate (lots of noise). The fix is to replace the valve internals for about $7 instead of the $300+ for replacing the pump. Polaris/jandy and INYO didn't have this as first thing to check in troubleshooting and it caused me 3 days of headaches and over $300.
The Most Helpful Review
6 0
(4 out of 5 stars) Booster Pump
Reviewed By: Scott A. from Arlington, TX ()
New booster pump arrived quickly and in good condition, thanks to INYO. Installation was easy. This pump hasn't changed much in the past 10 years. It operates smoothly, as expected.
Was this review helpful to you?
The Most Recent Reviews
2 0
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
great replacement , 1 2 3 done.
Was this review helpful to you?
2 0
(4 out of 5 stars) Booster pump
Reviewed By: cdw5 ()
Cons: Noisy
Noisier than the PB4 it replaced.
Was this review helpful to you?