Model # 351230SR
Model # 351230SR
Availability Please allow 3 - 4 weeks for delivery - Special order item
QUIET, EFFICIENT AND SUPER-RELIABLE PERFORMANCE
Dynamo® exceptionally quiet operation and high-flow performance. Constructed of Sta-Rite's rugged thermoplastic resin. Large-capacity trap and an all-weather, smooth running motor.
Where will I find a power switch for my Sta Rite Dynamo pump?
The toggle switch is located on the backside of the Cap, motor enclosure. You may click here to view a full schematic of the pump.
My. Pump P6RA6F-206L. Is this hard to change
Good afternoon Jim, Pretty easy If you are changing the motor or installing the pump. If you are installing the New pump plumb and wire. If changing you would just need to unbolt from housing,remove diffuser and impeller and seal, and then unbolt the motor. Putting this on is the same in reverse plus changing out the shaft seal. If you need any help with either feel free to call.
Looking for replacement for Sta-rite pump model JWPA5E7L-2A1 (Serial #1L99K) it's on a Sta-Rite System 3 Modular Media filter.
Yes, the Dynamo would be an acceptable replacement pump for your current pump.
I'm looking for a replacement for my JWPS5YGLA2
Hi Mason, I was unable to cross reference the model number provided to a specific JWP pump. However, the Sta-Rite Dynamo pumps can be used as a replacement for the JWP Series pumps.
I have a STA-RITE 1HP model # ABC4E7-2AA for a above ground pool. Would like to know if this is right for this.
I searched for your model pump on our site and online but I was unable to pull up any information on it anywhere. Please check the Make and Model information so I may better assist you. Thank you!
I need to replace pump JWPAS5F-2A4. what would you recommend?
Hi Andy, This Sta-Rite Dynamo pump can be used as a replacement. You can use other above ground pool pumps but will have to use different connections.
I need a replacement pump for my above ground pool. My pump that went out is a 1.5 hp sts-rite abgs4f-2a4
Hi, This Sta-Rite Dynamo Pump will replace the Sta-Rite ABGS4F-2A4 pump.
is there a replacement motor for a starite abgs4yf7-a1.mine shuts down when i run on high .sometimes it runs for 10 minutes or even 1 hour.thanks
Hi Ron, This Sta-Rite Dynamo pump will replace the Sta-Rite ABGS4YF7-A1. If your original pump has a twist-lock cord then you will have to reuse that cord because this model comes with a standard cord.
I need to replace a in ground sta rite pool pump and motor p2ra5e-181l (1j05s ) what are my options?
Hi Robert, The Speck EasyFit MXG 1 HP Pump (IG281-1100M-0DG) will be an exact replacement for the P2RA5E-181L pump.
Hi I need to replace my sta rite pool pump (I think) - model #MPRA6E-147L for our in-ground pool. What is currently comparable?
Hi Helen, The Speck EasyFit DYN 1HP Max Rated - IG281-1100M-0DY is a suitable drop-in replacement for your Sta-Rite MPRA6E-147L pump.
Hi, I have a 18000 gallon above ground pool, but have always used a sand filter with an in ground Sta-Rite 2 HP pump I got from a friend years back... the motor just died. Can I use say a 1.5 HP above ground pump with the existing sand filter? It is a swim quip if I remember right. Would that filter require a centrifugal in ground pump?
Hi Dan, You can use a 1.5 hp pump to circulate the water in an 18,000 gallon pool.
I need to replace a Sta-Rite Cristal Flo above ground pool pump (Model # ABG4E-2A4) 1 horsepower - do you have anything that could replace this?
The Dynamo would be a good replacement for that system. It would have to be the 1HP jump though unless your filter is able to handle the increased flow rate of the 1.5HP
I have a Sta-rite JWPA5E7L-2A1 pump will this replace it? It also has the outlet on the side not the top. does this pump come with this option?
Hi Michelle, I'm showing the Sta-rite JWPA5E7L-2A1 is a 1 HP pump, so I would suggest the Sta-Rite 1 HP Dynamo Pump. The outlet can be rotated so once you received the pump you could rotate the discharge port.
I have a 1.0 horse Sta-Rite pump, model number JWPA5EL-2A2. Is this pump a compatible replacement? Thank you
Hi Greg, Yes the Sta-Rite Dynamo is the closest pump to the older Sta-Rite JWPA pump. Your pump JWPA5EL-2A2 was a 1 HP and this is a 1.5 HP so this pump will be more powerful. When speaking with Sta-Rite they have suggested that customers needing to replace their JWPA pumps should go with the Sta-Rite Dynamo pump.
CAN THIS PUMP REPLACE MINE? MINE IS A JWPA5EL-2A2U
Hi Brenda, The JWPA5EL-2A2U is a 1 hp pump so the Sta-Rite Dynamo Pump 1 HP w/ STD Cord - 340197SR is the exact replacement. If you want to go to a 1.5 hp you will have to make sure that your filter is large enough.
Where is the 3 foot cord? I bought one last week and the cord was not in the box.
Hi Gary, This pump is supposed to come with a 3' cord if one was not included reply with your order # and I can have one shipped out to you.
Will this replace pump model jwpas5f-2a4 and motor number s48b74a03?
Hi, This pump can replace the JWPAS5F-2A4 pump.
I need a replacement for my sta-rite pool pump P2RA5F-182L. Will this model be the same? I have a spa and pool.
HI Terry, The Sta-Rite Dynamo 1.5 HP Pump (351230SR) will not replace your Sta-Rite P2RA5F-182L Pump. The Speck EasyFit MXG 1.5HP Max Rated Pump (IG281-1150M-0DG) would be a more suitable replacement.
What voltage is this pump and what inlet and exit fitting size is it?
Hi Matt, The Sta-Rite Dynamo 1.5 HP Pump is 115 volts and has 1-1/2" inlet and outlet ports.
Is this compatible and correct replacement with my old STA-RITE pump? My old pump Model No: P2RA5F-182L Please see the image in the following URL: http://1drv.ms/1Mm2LUF
Satish- The Sta-Rite Dynamo 1.5 HP Pump part # 351230SR is an above ground pool pump and would not be as strong as your Dura-glas/ Max-E-Glas. A more suitable drop in replacement for your Dura-glas/ Max-E-Glas would be the Speck EasyFit MXG 1.5HP Max Rated Pump Part # IG281-1150M-0DG.
Does the pump outlet rotate to the horizontal position, so it can replace the JWPA pump on the Sta-Rite PLM-150 filter system?
Hi, The Sta-Rite Dynamo 1.5 HP Pump discharge do not rotate, you will have to go with the Pentair Optiflo 1.5 HP 115/230V Horiz. Discharge 3' STD. Cord.
where is the on switch? new unit and I don't have an illustration of what's what .
The on off switch will be located on the back of the motor.