Model # CD3T-5
By Stegmier Corporation
Model # CD3T-5
STEGMEIER CHANNEL DRAIN
Stegmeier LLC Channel Drain has an attractive dual channel top that reduces water pass-over. Channel Drain is an extruded PVC drain that comes with connecting couplers and is designed to be set level. This drain is commonly used in pool decks, patios and other pedestrian traffic areas. Channel Drain is easy to install by staking on grade (no trenching required) and has a full .100” thickness top for durability.
Note: This drain is packaged in 16 - 5' lengths with protective tape on top surface.
For more Pool Deck Drain
What if I only need 10 feet of the drain?m] can I buy only 10 feet? thanks Matt
Hi, Matthew. Unfortunately, this item is only sold in case of 80 ft.
is there a material to place with drain to seal any gaps between the drain and deck if a small gap is present to seal off the water flow?
Hello Mike, this looks like one custom molded product, there are not any other part/pieces aside from the connector parts.
Can this drain be installed as a curved design? If not, do you have one that does?
Hi, Amy. Unfortunately, it can not be installed as a curve. However, it can be installed as with a Cross, Tee, 45 degree angle, and a 90 degree angle. We do not have drains that are flexible enough to be curved.
Do you narrower lengths. The width of my channel is 1.5 inches
Unfortunately, we do not have narrower channel drains smaller then 1.625".
Do you offer or have a recommendation for a drainage basin for the channel drain to tie into in order to move the water away?
Hi Matt, We do not have any recommendations for a drainage basin.
Is there something that can be installed to stop mosquitos from getting in through drain
Unfortunately we do not have any part or accessory available to prevent mosquitoes from getting into the drain.
Do you sell a screened end cap, to avoid insects/rodents from getting inside?
Hello Patrick, We do not have a channel drain end cap with a screen. We do carry the Deck Drain End Plug Case 10 but it is a solid end cap.
I have 4 sections in need of a repair. Do you sell just the top so the old can be cut out and replaced with a new top?
Hello Scott, There is not a top to these Channel Drains that can be removed or cut out. They are a one piece molded product that would need to be removed and replaced if you have any broken sections.
How do you clean the strip
Hi Ken, There is not anything available specifically for cleaner strips of these drains. You can pick up a cleaner at a local shopping center.
Can I buy one 5' section?
Hello, we only offer Stegmeier drain sections in packs, these are not available in singles.
how do you connect them together?, Do they come with unions? is the channel connector for regular drain included?
Hello Jaime, For the Stegmier CD3T-5 CHANNEL DRAIN TAN CASE OF 16 - 5 Ft. SECTIONS (80 FEET) comes with 8 couplers, which is how they would connect together. You would also need one of the drain adapters to connect to your drainage line.
do they make a 90 degree corners I redoing existing pool drain much smaller and adding concrete pavers
Hi Ed, yes you can find the 90 Degree Corners here
Can I purchase 10 foot sections instead of 5 foot sections?
Typically these come in 10FT sections from the manufacturer but we have them cut into 5FT sections so that we can ship them via UPS instead of freight truck. This saves the customer a great deal in shipping costs.