Part # FG1003
Dimensions 19" L x 12" W x 6" D
Alternate Part #'s 192187, 59001800, DEX3600DA
Time to Replace Your DE Grids?
Our DE Grids are used on the most common pool filters including American Products, Pentair, Hayward & Pac-Fab. Most DE Filters will require 7 Full Grids and 1 Partial Grid. Typically DE grids last about 5 years so if it has been longer than 5 years than now is the time to replace your DE grids.
Things to Consider When Replacing Your DE Grids
Note: Collar has open slot (2 notches). Length is measured from one end of the grid to the other (collar not included).
I have a Hayward DE 360S Micro * Clear Filter. What is the item number for replacement grids and does it come with instructions??
Reply
I have a Nautilus NS-36 DE filter, (filter area 36 sq ft), that I need to replace the grids in. The full size grids measure approx.18.5 in length and are approx.19.5 wide. I need to replace the grids only, which ones should I be ordering? (the measurements don't seem to match up with the ones available for ordering)
I also get some DE reentering the pool from the returns which is creating a film on the bottom of the pool. What can I do to prevent this? Thank you!
Reply
Yes these actually would be the correct replacement grids or you can view the parts by clicking here to view key 10 for another option. You may also need to replace the manifold, the spider gasket in the multiport if you have one, or the o ring on key 12. We recommend inspecting those as well as for those can cause d.e. to go back into the pool.
Reply
I have a de filter attached to a pentair challenger cf series pump. The label says nautilus and serial # 0987-1104. All other information on the label has faded away. Can you tell me what model I have? I also sent an email yesterday to your company and haven't received any response.
Reply
The Nautilus series does have a few different models and we cannot use serial numbers for that series however Pentair can. Their phone number is 1-800-831-7133.
Reply
I have a de filter attached to a pentair challenger cf series pump. The label says nautilus and serial # 0987-1104. All other information on the label has faded away. Can you tell me what model I have?
Because your tank appears to be stainless steel, there are two options: Pentair Nautilus Plus Stainless D.E. NSP36, 48, 60 & 72 or Pac Fab Nautilus Stainless D.E. If you cannot tell which model you have by the parts diagrams, then call Pentair with the serial number and they may be able to identify it.
Reply
I have a hayward D E 3620 filter what is correct filter and how many are in it.
Reply
Hi, Rick. The Hayward DE3620 has a total of 8 grids. You can purchase the 36 Sq. Ft. Grid Pack 18" - FG1003PACK which includes the 7 Full and 1 Partial.
Reply
My filter is a Hayward DE3600. I need to replace two grids. My pool guy says a need 1 (one) full 36" grid and one (1) partial 36" grid for the DE3600?
Reply
will this fit a purex triton 4000 ?
Reply
Hi, Eugene. This FG1003 grid will not fit the Purex 4000 Series Molded D.E. Filter. The grids are all listed on the Purex 4000 Series Molded D.E. parts page.
Reply
I have an Aquatic FNS-36 and need to replace some of the elements, can you tell me which one I should purchase?
Reply
Hi, This 36 Sq. Ft. Full Grid - FG1003 is the correct size grid for the Aquatic Systems FNS-36 filter. If you need to replace all of the grids only I would recommend p/n FG1003PACK or the complete grid assembly p/n 59023500.
Reply
I have a Nautilus NS36 filter that takes FG-1003 filters ( 18 inches tall ). I also need to replace 2 rods ( about 21 1/2" long with nuts). I notice that you can sell the whole assembly. How much both ways.
Thanks
Bob
Reply
Good afternoon Bob, You can see all the parts available for this filter here.Pac Fab Nautilus Stainless D.E. Parts or the whole assembly Grid Assy., 36sq.ft. - Ns36 - 192325
Reply
Need 8 grids for Purex 30 SF ...DE filter 24" x 7 1/2 " across
Reply
I will need to know which model of Purex filter you have to determine whether that is going to be the correct grids for your filter.
Reply
I have a Hayward de3620 filter pro grid----Id # is 2111050 205011 5002. I want to make sure I order the positively correct part. I wish to buy the complete nest.. Do you stock it and where can I find same on your site, or should I call. Thanks Gary
Reply
Hi, Gary. The Grid Assy (DEX3600DC) is the complete cluster for the Hayward DE3620 filter.
Reply
i am looking to replace the grids in my filter they measure 18 inches tall im not including the tab that inserts into the manifold should i be ?
Reply
Gary, If the grids are 18: tall, then they would be 36 sq. ft. grids like the FG1003.
Reply
I have model# DE-LE-42052 Hayward Crystal Clear II D.E Filter that I need replacement grids for but need help ordering correct size. Information on label is:
36 ft. 2 72GPM 50PSI Top Side
18 16
Can you please help me with this? Thanks, Pat
Reply
Pat, If you need to replace all 8 grids, you can find them here: http://www.inyopools.com/Products7/05100012060823.htm?Keywords=fg1003pack
Reply
I have Crystal Clear 2 DE Filter
Model# DE-LE-42052
36ft2
72GPM
50 max psi.
Which grid will work for this system?
Reply
Hi Bruce, these are the correct replacement DE grids for the Crystal Clear 2 DE Filter Model# DE-LE-42052 by Leslie's.
Reply
Re: Hayward DE3620 Pro-Grid
Why is it cheaper to buy (7) Full Grid #FG1003 @ $19.99 + (1) Partial Grid #PG1903 @ $14.99 than it is to buy the Complete Grid Cluster #4810-65 @ $322.99? Thank you...
Reply
Hi David, the complete grid cluster includes other items besides the grids like the top manifold, bottom grid locator, retainer rod and stand pipe. These additional parts make the grid cluster more expensive then just purchasing the grids.
Reply
I need to replace all elements in my Pro-Grid Hayward DE 3620 filter. Which part should I order?
Reply
You can purchase the complete grid pack being part number FG1003PACK or you can purchase the complete rebuild grid assembly being part number 4810-65.The pack is just the elements and the assembly is ready to place back into the filter body already assembled.
Reply
I have a nautilus ins36 pac fab and I need to replace the filter grid what do I get ? Thank you
Reply
Hi Cam, If you're purchasing p/n FG1003, you would only get 1 single grid. If want to replace all the grids then you will need to get p/n FG1006PACK.
Reply
I have an Triton Nautilus FNS 36 Diatomaeous Earth Filter . What grid model # do I need
Reply
Hi, This will be the correct size filter for your filter model. If you're replacing all of the grids I would recommend the 36 Sq. Ft. Grid Pack (FG1003PACK), it includes the 7 Full & 1 Partial grids.
Reply
hello! ?I have a DE-3600 filter and need to replace the grids. are all the grids the same size in this filter?
Reply
I have an older de3600 filter. Do you have the completely assembled grid and how much would that be
Reply
Hi Helen, Yes we do carry the Complete Assembled DE Grid Assembly For The Hayward DE3600 Filter here.
Reply
Need replacement Filter elements (DEX3600DA) for my Hayward Pro-Grid vertical DE filter series. Do you have these filters (7 large and 1 smaller)?
Reply
Hello David - The correct grid pack is FG1003PACK.
Reply
I need to order replacement grids for my d.e filter but I'm not sure which ones to order. How do I know which one is the right one?
Reply
The easiest way to figure out the correct grid would be to measure the length and width and compare it to the measurements we have listed on the product page.
Reply
The Most Helpful Review
13 0
(5 out of 5 stars) De Grids
Reviewed By: vivogram from Bridgeview, Il ()
Pros: exactly what we needed
Cons: none
we looked all over for the parts for our filter. We have had it since 1985! the description off the parts as well as the fast shipping was awesome
Was this review helpful to you?
The Most Recent Reviews
(5 out of 5 stars) Saved me some here
Reviewed By: Superbeast ()
Better than buying a new filter. Surprised actually they were available.
Was this review helpful to you?
(5 out of 5 stars) So far so good
Reviewed By: ()
So far so good
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: ()
This gird was perfect It's construction looked better than the original Pentair. The price was unmatched.
Was this review helpful to you?
(5 out of 5 stars) Worked Perfect
Reviewed By: Richard N. ()
Pros: Worked perfect
Cons: None
No complaints, It fit in perfectly and its worked fine so far
Was this review helpful to you?
(5 out of 5 stars) exactly what i wanted. will order again!
Reviewed By: Lauri K. from clayville,NY ()
Pros: fast and easy
Cons: none
I have a Hayward 3600 de. It requires 8 filters. The 8th one is narrower than the rest. I had this one already. will order from you again. Thanks
Was this review helpful to you?
(5 out of 5 stars) Saved big$$ over local pool shop
Reviewed By: Kent S. from Edwardsville, Il. ()
I went to a local pool supply store to order new grids for my pool filter. They told me they would have to oder them. The price they quoted me was twice the price that INYOPOOLs price was. Naturally I ordered from you guys and got delivery within 4 days. The product was perfect and saved 1/2! Very pleased.
Was this review helpful to you?
(5 out of 5 stars) Fit Perfectly
Reviewed By: Lisa B. ()
Exactly what we needed and cheaper than our local store.
Was this review helpful to you?