Part # FG1004
Dimensions 24" L x 12" W x 6" D
Alternate Part #'s 192188, 59002400, DEX4800DA, R0555000
Time to Replace Your DE Grids?
Our DE Grids are used on the most common pool filters including American Products, Pentair, Hayward & Pac-Fab. Most DE Filters will require 7 Full Grids and 1 Partial Grid. Typically DE grids last about 5 years so if it has been longer than 5 years than now is the time to replace your DE grids.
Things to Consider When Replacing Your DE Grids
Note: Collar has open slot (2 notches). Length is measured from one end of the grid to the other (collar not included).
Will these filters fit on my Nautilus DE Filter NSS-48?
Hello, yes this would be the correct full grid for your filter.
Will this fit American products 584090?
Hi. Yes, these are the correct size grids for the American Products 584090 filter.
How much is total 8 catridges ? Shopping for full 7+1 . Please email me total package. Thank you
Hi, Kelly. The 48 Sq.Ft. Grid Pack (7 Full&1Partial) - FG1004PACK is the link to all 8 Grids.
I have a Pentair FNS Plus Filter with FNSP 48 grids. Besides the one partial grid that's smaller, are the other 7 all of the same size and can be installed interchangeably?
Hi, Angela. The 7 large grids are all the same which is Item # FG1004 and the Small grid is Item # PG1904. We have the 48 Sq.Ft. Grid Pack (7 Full&1Partial) - FG1004PACK which includes all 8 grids.
Hello, will this DE grid fit with ASTRALPOOL Clarity 48 filter (dimensions seem to be similar) ? Is shipping to France possible? Thanks.
Hi, Laurent. Yes, these grids will fit the Astral Clarity 48 DE filter. We can haves these grids shipped to France, please provide the shipping address for a quote.
I have an older model micro clear DE filter 48 sq ft. The diagram shows 7 full grid required, however my filter has 8. Will these grids work in my filter?
Craig, There are 7 full and 1 partial grid for that filter. You would want the FG1004PACK. That would give you the set of all 8 grids.
Will this DE grid fit a De Hayward model 4820 pro-grid pool filter?
hello, Yes, this will fit a Hayward DE4820 filter.
Hi, I have an old Sta-Rite Posi-Flo 48 sq ft model #74548 DE filter with the manifold at the bottom. Is the Unicel FG-1004 a suitable grid for this filter. It currently has 8 Unicel Full grids but I can't find the grid model number. Thanks
Hi, Peter. I was not able to locate any info on a Sta-Rite Posi-Flo DE filter 74548. If you can please send pictures of the unit to firstname.lastname@example.org.
Hi Guys! Your parts compatible my filter model N Clarity DE-48 (Astral Pool), end can you send me to Russian Federation? Me need 2 pc.
Hi, Evgenij. This 48 Sq. Ft. Full Grid 24" - FG1004 will fit the Astral Pool Clarity DE-48 filter. We can ship this item to the Russian Federation. Please reply with your shipping address.
will D E filter #FG1004 work in place of PFG2448? I have a nautilus tank #ns48
Hello Jerry, Yes these will work If you just want the all grids for the FNS48 it is part number FG1004PACK, if you want the grid assembly with it already assembled that is part number 59023400.
for a pentair 48 inch filter p/n 180008 what is the cost for all the grids.
If you just want the grids it is part number FG1004PACK, if you want the grid assembly with it already assembled that is part number 59023400.
I am changing the grids in the pool filter . the open slot in the filter is in the bottom not on top .would it work .please let me know ,appreciate your assistance .thanks
Hi, Ed. These are not the correct grids for your filter. if you can provide us with the model number to your filter we can locate the correct replacement grids.
who makes this grid?
The manufacturer is Unicel.
I have a Hayward DE 480 S . would your 48 DE grids fit this filter?
Hi Craig, this 48 sqft full grid will fit the Hayward DE 48 filter. If you need to replace all 8 grids you can purchase the 48 Sq. Ft. Grid Pack (FG1004PACK).
will the FG1004 and FG1048 interchange? Will they install in the base?
Hi Jim, The FG1004 and FG1048 are not interchangeable.
I have a 15 yr old Nautilus INS Pac Fab 48 DE filter. Works great. Also own new set of fins for it. After last cleaning now dripping from lower piping assembly underneath/within the skirt/housing below the tank. I think it is probably just o rings etc on that lower piping assembly. 1. What would I need to purchase? Try this first? OR 2. If I buy a new Pentair FNS Plus D.E. Filter, will I be able to use the whole new set of fins I already have for the Nautilus INS Pac Fab 48 DE filter
Hi Rick, I would first start off by replacing key # 26, 31 and 32 located on the Pac Fab Nautilus INS Parts Break Down Page. If you do end up going with a complete FNS Plus 48 Filter then the individual grids will work from the INS to the FNS Plus but the top and bottom manifold are different. So if you have a pre-assembled grid pack you will need to remove the grids.
Is this the right part for the filter formerly called the Nautilus FNS 48
Hi David, Yes this is the proper replacement DE Grid Pack for your Nautilus FNS 48 Filter. We also have a Video on How to Replace your DE Grids which you may find helpful.
I have a Hayward PRO-GRID D.E. Filter DE4820 and need to replace all of the filters inside. What all do i need to order?
do you have this grid with just a notch in the middle of the outside of the curve.Or an adapter to put over the middle slot which will make it one notch on the outside
Hi Bob, We have specific grids for different filters, if you can provide us with the model of your filter we can verify which grids you need.
hi, how much earth do i add to the grid filter triton plus nsp nautilus. 30k gallons/ i removed my grids to clean filter after opening. a lot of water was retained in the grids it was dripping out very slowley. is that normal or do you think i have and issue. and last when i move the lever around on the port valve is no longer sits in the groove it lind of drops trhe hanle back and the sits out of the groove in the front. thanks, sean
Hi Sean, This article does a great job on explaining How Much DE Filter to Add to your Pool Filter we also have a Video on How to Add DE Powder to your filter you may find helpful. Also here's a Video on How to Backwash a DE Filter and a Video on How to Remove DE Grids and Do a Full Cleaning.
Will the FG1004PACK fit a Hayward DE-480S filter?
Hi Jim, The FG1004PACK will fit a Hayward DE-480S filter.
I have a Hayward DE4800 filter. Will this grid panel fit? Thanks
Hi Gary, The 48 Sq. Ft. Full Grid will fit into the Hayward DE4800. If you need to replace all 8 grids I would recommend getting the 48 Sq. Ft. Grid Pack (FG1004PACK).
What grids do I use for my Crystal Water Waterways 48 seriel D105268 filter?
The Waterway Crystal Water DE Filter Parts requires 7 full grids and 1 partial. Replace with Grid DD 48 Sq Ft 7 Required (818-3910) PART# 4742-103 click here to view. The partial Grid, DE Short 48 Sq Ft Single (818-3900) PART# 4742-100 click here to view. For other parts available please click here to view the schematics of the filter.
I have Jandy Pool/Spa Filter Model : DEL48 I want to get the complete grid set Which one will fit my filter , & do you have to purchase them seperate , Or do you have them all in one complete set ?
Hi SD, The 48 Sq. Ft. Grid Pack (7 Full & 1 Partial) (FG1004PACK) would be the complete grid pack for your size filter.
Hello, my filter model # is 57025000, S/N 001186. I need one partial grid and 7 full size grids but what part/model of grids do I need and can I order them from you? Thank you very much.
Hi Gus, The 48 Sq. Ft. Grid Pack (7 Full & 1 Partial) (FG1004PACK) will consist of all 8 grids and will fit into your 57025000 model filter.
my filter Pyrex triton 5048 7 full grids 1 partial 36" circular 48" vertical what cartridge kit is needed"
Hi Dan, The 48 Sq. Ft. Grid Pack (7 Full & 1 Partial) will be the correct grid pack you will need.
I was wondering if these grids will fit my filter. Waterway Crystal Water Filter, DE 48 Sq Ft, Model: 570-0048 Thanks
These are not the correct grids for the Waterway Crystal Water D.E. filter model 570-0048. There is a smaller 48 sq. ft. grid part number 4742-100 and the larger grid part number 4742-103. This model takes 7 of the large grids and 1 of the smaller grid.
I have a Pac-Fab Nautilus FNS 24 filter. Which of the grids will replace the current grids?
I need to order replacement grids for my d.e filter but I'm not sure which ones to order. How do I know which one is the right one?
The easiest way to figure out the correct grid would be to measure the length and width and compare it to the measurements we have listed on the product page.
What is the micron rating for a Unicel element?
All Unicel elements & grids have a 20 Micron Rating.
Is this the correct grid for my Nautilus NS48 DE tank?
Yes these are the correct DE grids for the Nautilus NS48 DE tank
Less than 1 hr
2 to 4 hrs
Wrench Set, Adjustable Wrench
When I removed the old grid assembly it was totally caked with old DE dirt. Even after back washing. This is the first time disassembling. Brought home about a year ago. Ordered new grid due to DE dirt being pumped back into pool. Wish you offered a complete kit with all 8 grids. Did not understand what a partial grid was until I disassembled the filter unit. Partial means one of the grids a smaller. So I did not order the partial grid. Will have to order this part and disassembly filter again to install this part. Could not find clear instruction on reassembly of grids. Figured it out after about 1/2 an hour. Need to assemble it upside down. And the grids need to start outside of the bottom filter locator circle. There is this molded in circle in the filter locator. The tips of the filter need to be outside of this circle. For the grid to fit properly.
(5 out of 5 stars) D.E. Filter Grids: OEM, great price, on time
Reviewed By: Ron in Calif. from Sacramento, California ()
Pros: On time, OEM, super price
To be honest I had some trepidation because of some less than stellar reviews. But the price was irresistible. The fileters were shipped same day as promised, arrived within 5 business to Calif. as promised (with the FREE shipping), and were OEM filters in perfect condition. And I saved a boatload of money over other online sellers and my local pool supply. I will definitely use them again.
(5 out of 5 stars) Great Grid
Reviewed By: Diana K. from Uniontown, Ohio ()
All of our grids were old and tore and it was difficult to keep the pool clean. It was great to receive these grids and we are having an easier time in keeping the pool clean. The on-line ordering was easy and product was received within the time specified.