I need to order replacement grids for my d.e filter but I'm not sure which ones to order. How do I know which one is the right one?
Reply
The easiest way to figure out the correct grid would be to measure the length and width and compare it to the measurements we have listed on the product page.
Reply
I have a Pac-Fab Nautilus FNS 24 filter. Which of the grids will replace the current grids?
Reply
I was wondering if these grids will fit my filter.
Waterway Crystal Water Filter, DE 48 Sq Ft, Model: 570-0048
Thanks
Reply
These are not the correct grids for the Waterway Crystal Water D.E. filter model 570-0048. There is a smaller 48 sq. ft. grid part number 4742-100 and the larger grid part number 4742-103. This model takes 7 of the large grids and 1 of the smaller grid.
Reply
my filter Pyrex triton 5048 7 full grids 1 partial 36" circular 48" vertical what cartridge kit is needed"
Reply
Hi Dan, The 48 Sq. Ft. Grid Pack (7 Full & 1 Partial) will be the correct grid pack you will need.
Reply
Hello, my filter model # is 57025000, S/N 001186. I need one partial grid and 7 full size grids but what part/model of grids do I need and can I order them from you? Thank you very much.
Reply
Hi Gus, The 48 Sq. Ft. Grid Pack (7 Full & 1 Partial) (FG1004PACK) will consist of all 8 grids and will fit into your 57025000 model filter.
Reply
I have Jandy Pool/Spa Filter Model : DEL48 I want to get the complete grid set Which one will fit my filter , & do you have to purchase them seperate , Or do you have them all in one complete set ?
Reply
Hi SD, The 48 Sq. Ft. Grid Pack (7 Full & 1 Partial) (FG1004PACK) would be the complete grid pack for your size filter.
Reply
What grids do I use for my Crystal Water Waterways 48 seriel D105268 filter?
Reply
The Waterway Crystal Water DE Filter Parts requires 7 full grids and 1 partial. Replace with Grid DD 48 Sq Ft 7 Required (818-3910) PART# 4742-103 click here to view. The partial Grid, DE Short 48 Sq Ft Single (818-3900) PART# 4742-100 click here to view. For other parts available please click here to view the schematics of the filter.
Reply
I have a Hayward DE4800 filter. Will this grid panel fit?
Thanks
Reply
Hi Gary, The 48 Sq. Ft. Full Grid will fit into the Hayward DE4800. If you need to replace all 8 grids I would recommend getting the 48 Sq. Ft. Grid Pack (FG1004PACK).
Reply
Will the FG1004PACK fit a Hayward DE-480S filter?
Reply
Hi Jim, The FG1004PACK will fit a Hayward DE-480S filter.
Reply
hi, how much earth do i add to the grid filter triton plus nsp nautilus. 30k gallons/ i removed my grids to clean filter after opening. a lot of water was retained in the grids it was dripping out very slowley. is that normal or do you think i have and issue. and last when i move the lever around on the port valve is no longer sits in the groove it lind of drops trhe hanle back and the sits out of the groove in the front. thanks, sean
Reply
Hi Sean, This article does a great job on explaining How Much DE Filter to Add to your Pool Filter we also have a Video on How to Add DE Powder to your filter you may find helpful. Also here's a Video on How to Backwash a DE Filter and a Video on How to Remove DE Grids and Do a Full Cleaning.
Reply
do you have this grid with just a notch in the middle of the outside of the curve.Or an adapter to put over the middle slot which will make it one notch on the outside
Reply
Hi Bob, We have specific grids for different filters, if you can provide us with the model of your filter we can verify which grids you need.
Reply
I have a Hayward PRO-GRID D.E. Filter DE4820 and need to replace all of the filters inside. What all do i need to order?
Reply
You can replace all the grids which would be part number FG1004PACK and or the complete grid assembly being part number 4810-65A.
Reply
Is this the right part for the filter formerly called the Nautilus FNS 48
Reply
Hi David, Yes this is the proper replacement DE Grid Pack for your Nautilus FNS 48 Filter. We also have a Video on How to Replace your DE Grids which you may find helpful.
Reply
I have a 15 yr old Nautilus INS Pac Fab 48 DE filter. Works great. Also own new set of fins for it. After last cleaning now dripping from lower piping assembly underneath/within the skirt/housing below the tank. I think it is probably just o rings etc on that lower piping assembly.
1. What would I need to purchase? Try this first? OR
2. If I buy a new Pentair FNS Plus D.E. Filter, will I be able to use the whole new set of fins I already have for the Nautilus INS Pac Fab 48 DE filter
Reply
Hi Rick, I would first start off by replacing key # 26, 31 and 32 located on the Pac Fab Nautilus INS Parts Break Down Page. If you do end up going with a complete FNS Plus 48 Filter then the individual grids will work from the INS to the FNS Plus but the top and bottom manifold are different. So if you have a pre-assembled grid pack you will need to remove the grids.
Reply
I have a Hayward DE 480 S . would your 48 DE grids fit this filter?
Reply
Hi Craig, this 48 sqft full grid will fit the Hayward DE 48 filter. If you need to replace all 8 grids you can purchase the 48 Sq. Ft. Grid Pack (FG1004PACK).
Reply
I am changing the grids in the pool filter . the open slot in the filter is in the bottom not on top .would it work .please let me know ,appreciate your assistance .thanks
Reply
Hi, Ed. These are not the correct grids for your filter. if you can provide us with the model number to your filter we can locate the correct replacement grids.
Reply
for a pentair 48 inch filter p/n 180008 what is the cost for all the grids.
Reply
If you just want the grids it is part number FG1004PACK, if you want the grid assembly with it already assembled that is part number 59023400.
Reply
will D E filter #FG1004 work in place of PFG2448?
I have a nautilus tank #ns48
Reply
Hello Jerry, Yes these will work If you just want the all grids for the FNS48 it is part number FG1004PACK, if you want the grid assembly with it already assembled that is part number 59023400.
Reply
Hi Guys!
Your parts compatible my filter model N Clarity DE-48 (Astral Pool), end can you send me to Russian Federation? Me need 2 pc.
Reply
Hi, Evgenij. This 48 Sq. Ft. Full Grid 24" - FG1004 will fit the Astral Pool Clarity DE-48 filter. We can ship this item to the Russian Federation. Please reply with your shipping address.
Reply
Hi, I have an old Sta-Rite Posi-Flo 48 sq ft model #74548 DE filter with the manifold at the bottom. Is the Unicel FG-1004 a suitable grid for this filter. It currently has 8 Unicel Full grids but I can't find the grid model number. Thanks
Reply
Hi, Peter. I was not able to locate any info on a Sta-Rite Posi-Flo DE filter 74548. If you can please send pictures of the unit to upload@inyopools.com.
Reply
I have an older model micro clear DE filter 48 sq ft. The diagram shows 7 full grid required, however my filter has 8. Will these grids work in my filter?
Reply
Craig, There are 7 full and 1 partial grid for that filter. You would want the FG1004PACK. That would give you the set of all 8 grids.
Reply
Hello, will this DE grid fit with ASTRALPOOL Clarity 48 filter (dimensions seem to be similar) ? Is shipping to France possible? Thanks.
Reply
Hi, Laurent. Yes, these grids will fit the Astral Clarity 48 DE filter. We can haves these grids shipped to France, please provide the shipping address for a quote.
Reply
I have a Pentair FNS Plus Filter with FNSP 48 grids. Besides the one partial grid that's smaller, are the other 7 all of the same size and can be installed interchangeably?
Reply
Hi, Angela. The 7 large grids are all the same which is Item # FG1004 and the Small grid is Item # PG1904. We have the 48 Sq.Ft. Grid Pack (7 Full&1Partial) - FG1004PACK which includes all 8 grids.
Reply
How much is total 8 catridges ? Shopping for full 7+1 .
Please email me total package. Thank you
Reply
Hi, Kelly. The 48 Sq.Ft. Grid Pack (7 Full&1Partial) - FG1004PACK is the link to all 8 Grids.
Reply
Do you sell the complete filter unit together ? Meaning all grids together to replace complete cartrige ?
Reply
Hi Tom, Yes we do carry the complete pre-assembled grid assemblies but we would need to know the model # of your filter. Could you click the reply link below and give us the model information from the label on the side of your filter.
Reply
Hi I have a haywood pro 2420 l de filter what size grids does it take
Reply
Hi James, the grid pack part number for your Hayward DE2420 model filter is FG1002PACK and if you would like the entire grid assembly with the manifold then the part number is.4811-35.
Reply
These grids will work with Jandy DEL 48?
Reply
Hello, yes these grids are compatible with the Jandy model DEL48 D.E. filter. You can also purchase the complete grid pack being part number FG1004PACK.
Reply
I have a 20 year old Hayward Micro Clear DE4800. The grids are 24" long...will the FG1004 work?
Reply
Hello Nancy - Yes, the FG1004 grid will fit the old Hayward MicroClear DE4800. That filter would require 7 of the FG1004 grids and one PG1904 grid.
Reply
,,,actually the Hayward manual shows I have an "IS-DE2400-98", and the grids are 24" long. Which filter assembly would work?
Reply
Hello, I wanted to know if this filter cartridge will fit in my Pentair FNS Plus 48?
Reply
This 48 Sq. Ft. Full Grid 24" (7 Required) - FG1004 will be perfect for your Pentair FNS Plus filter. We also offer this 48 sqft Grid Pack 24" (7 Full & 1 Partial) - FG1004PACK which has all of the grids if you want to replace them all.
Reply
-FG1004.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&height=75&width=75&mode=pad)
-FG1004.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&mode=pad&width=650&height=650 "Pureline Replacement DE Filter Grid Element, Single, 48 Sq. Ft. Full Grid 24\" - PL0182")