Hi-Flo II Pool Pump - 2 HP, 115V, 2-Speed, 3' STD Cord, Horizontal - PH2200-6R

$398.99

IN STOCK
FREE SHIPPING

Model # PH22006R

By Waterway


Details

Top

Model # PH22006R

Manufacturer Code PH2200-6R

Availability Please allow 3 - 4 weeks for delivery

Product Description

The Hi-Flo II Above Ground pump was designed for superior and efficient performance. The Hi-Flo II pump features a high flow rate performance for faster filtering cycles. This pump is ideal for new installations or as a replacement pump.

Features

  • 1 1/2″ Union threads / 1 1/2″ FPT Intake and 2″ Union threads / 1 1/2″ FPT discharge
  • Powerful side discharge performance
  • Wet end can be rotated for easy installation
  • Large 6″ pump trap with 2-piece lid
  • High head capability
  • Trap is 2″ union x 1 1/2″ union / 1 1/2″ FPT

Product Specifications

HP:
2 HP
Speed:
Dual
Volts:
115 V
Port Size:
1.5 in.
Cord Type:
NEMA 3 prong
Cord Length:
3 foot
Discharge Location:
Horizontal
Top

?     Asked on 6/8/2017 by Thomas

Hi, I've got above ground pool 24' 15,000 gal if i'm not mistake. Right now using PH2200-6 , 2 speeds. It seem to me that that pomp can barely more water on higher speed, and doing pretty much no good on lower. My pool getting green every week no matter how much maintence I put into it. Please advise, should I get stronger pomp, bigger sand filter ..?
 Reply

A  Answered on 6/11/2017 by InyoPools Product Specialist Lennox H.

Hi, Thomas. I don't think the pump is the issue, I would make sure that your filter is cleaner or the media is replaced. The PH2200-6 is more than sufficient to circulate 15,000 gallons of water. Also monitor your chlorine level daily to make sure it's staying at an okay level.
 Reply


?     Asked on 4/25/2017 by MarLo

Up to how many gallons will this pump work. We have 16,000 g
 Reply

A  Answered on 4/25/2017 by InyoPools Product Specialist Scott W.

If you have an above ground pool with 16,000 gallons that will work for your pool, you just have to make sure the filter will be able to handle the flow rate of that pump.
 Reply


?     Asked on 4/3/2017 by WATERWAY HI-FLO PUMP (BAQUAPURE -REC WAREHOUSE)

I currently have a WATERWAY HI-FLO PUMP (BAQUAPURE -REC WAREHOUSE) 2.5 HP (2 HP FULL RATED) 2 SPEED that getting very old and tends to make a lot of noise so I am looking for a replacement. I have found one on another web site that is like for like to what I currently have, what would you recommend as a replacement pump ?
 Reply

A  Answered on 4/7/2017 by InyoPools Product Specialist Lennox H.

Hi, I would recommend, this PH22006R pump or the Carvin SLR9 - 94027513.
 Reply


?     Asked on 10/1/2016 by Frank Anello

I have a 1.5hp waterway AO smith above ground pool pump with horizontal flow , also has 2 speed with twist lock electric cord . This pump is 16 years old and I need a replacement , I would like he same type pump without spending 4 or 5 hundred dollars . your help would be greatly appreciated . Thanks you Frank
 Reply

A  Answered on 10/11/2016 by InyoPools Product Specialist Lennox H.

Hi, Frank. The Waterway Hi-Flo II Pump (PH2150-3) is the replacement pump that would be an exact replacement for your existing pump. The cost of this pump is $309.99.
 Reply


?     Asked on 5/30/2016 by

Is there any alternative brand that will replace this pump? Im looking for an inexpensive replacement.
 Reply

A  Answered on 5/30/2016 by InyoPools Product Specialist Patrick P.

This is the only 2 HP 2 Speed Above Ground Pool Pump we carry. Most above ground pools would not need a pump this large, what size pool do you have? Also if you are interested in going to a single speed pump then there are quite a few options which are less expensive.
 Reply


Top

Review Summary

 (Average 0  out of 5 stars)
0 Rating
5 star:
 
(0)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)