Part # 5056-13A
Manufacturer Code C176-47P1
Dimensions 11" L x 11.5" W x 4" D
Alternate Part #'s 30217, 351021090, C176-47P1, C17647P1, C76-47P, C7647P, STA1013715
My Starite pump's tank body is identical to this. Notice that the groove where the oring sits is flat. The oring that i took off and trying to replace resembles the shape of the groove( flat band like ring). Is there an oring of this shape or its just a typical oring with round body that just got flatened through time between the seal plate and tank body plate. What is the correcft part number oring I must use?
Hello, FB. Yes, the O-Ring can become flattened over time due to the compression of the two parts. The correct Seal Plate O-Ring for the Sta-Rite Dura-Glas and Max-E-Glas is PART# 5056-06. You may use link http://www.inyopools.com/pool_parts_jandy_stealth_original_2005_and_prior_.aspxas the guide for other parts available for the pump(s).
The part number on my pool pump case is Sta-Rite P2RA5. Does your part listed here fit this pump?
Yes this Tank Body will fit any of the Sta-Rite Dura-Glas pool pumps with the model # starting with P2RA.