START CAPACITOR, 124-149 MFD (BC-124)

$15.49

IN STOCK

Part # 5270-11

By U.S. Seal Manufacturing

  5 Average  

Details

Top

Part # 5270-11

Manufacturer Code BC-124

Dimensions 1-7/16" x 2-3/4"

Alternate Part #'s 124-148MFD125VAC, 124-149MFD, 15769525, 35-125-1005, 351251005, 610807-001, 610807001, BC-124, BC124, PMJ124, SPG-101-1915, USSBC124

Product Description

Start Capacitor 1-7/16" Diameter x 2-3/4" Tall

Commonly Used On:

Product Specifications

Diameter:
1-7/16 in.
Length:
2-3/4 in.
Volts:
110-125 V
Capacitor Microfarad Rating:
124-149 MFD
Top

?     Asked on 11/11/2020 by Rich

Is this the correct cap for a K48L2PA105?
 Reply

A  Answered on 11/11/2020 by InyoPools Product Specialist Joe S.

Hello Rich, yes the START CAPACITOR, 124-149 MFD (BC-124) would be the correct replacement
 Reply


?     Asked on 10/16/2020 by Phillip Awad

i have a made in mexico century motor that won't start. I'm looking to change the capacitor prior to replacing the motor unit. My motor mod: C48AB44A79 serial: 27217J2 which capicitor A or B am I looking to get that corresponds to this unit? thank you

 Reply

A  Answered on 10/18/2020 by InyoPools Product Specialist Patrick P.

Hi, Phillip to suggest the proper capacitor we would need to get an actual photo of the specifications label on the capacitor. Could you send us a few photos of the label from the capacitor? To supply photos simply click the reply link below and upload your photos. Once we get those photos we can make the proper recommendation.
 Reply


?     Asked on 8/27/2020 by Jeff Allem

What is the correct capacitor for a Century B625 motor PN 173840? The lettering is rubbed off and I can't read the specs. I do think it is a 124-149 MFD.
 Reply

A  Answered on 10/28/2020 by InyoPools Product Specialist Hector F.

Hi Jeff, this is the correct capacitor for your motor catalog number B625. 
 Reply


?     Asked on 7/28/2020 by

Will this fit my Polaris PB4-60 pump?
 Reply

A  Answered on 10/27/2020 by InyoPools Product Specialist Hector F.

Could you send us a few photos of your motor? Please take a close up shot of the motor label as well. To supply photos simply click the reply link below and upload your photos. Once we get those photos we can make the proper recommendation.
 Reply


?     Asked on 7/12/2020 by Andy

Hi, Is this the right start capacitor for motor AO smith # C48J2PA105C1? Thanks
 Reply

A  Answered on 11/18/2020 by InyoPools Product Specialist Hector F.

Hi Andy, yes this capacitor is the correct start capacitor for the motor model C48J2PA105C1. 
 Reply


?     Asked on 6/16/2020 by Josep Quigley

How fast can I get this capacitor
 Reply

A  Answered on 11/23/2020 by InyoPools Product Specialist Hector F.

Hi Josep, this capacitor is available to be expedited. Once added to your cart you can select the shipping method to get an estimated shipping cost as well. 
 Reply


?     Asked on 5/27/2020 by Michael Kuske

Is this the correct start capacitor for a post-2011 PB4-60?
 Reply

A  Answered on 10/21/2020 by InyoPools Product Specialist Hector F.

Hi Michael, in order for us to cross-reference the correct capacitor for you we will need the motor model, part, or catalog number in order to confirm.  
 Reply


?     Asked on 3/25/2020 by

Is this the correct capacitor for a Century motor model# K48L2N104?
 Reply

A  Answered on 3/25/2020 by InyoPools Product Specialist Hector F.

Yes, this is the correct start capacitor for the model K48L2N104 motor. 
 Reply


?     Asked on 10/9/2019 by Foster

I have a 3/4 HP motor that has pump model C48J2N131B1 and the motor has a number SP1605Z1M. Is this the correct capacitor for my motor?
 Reply

A  Answered on 10/9/2019 by InyoPools Product Specialist Hector F.

Yes, this is the correct start capacitor for your model C48J2N131B1 motor. 
 Reply


?     Asked on 7/19/2019 by Mark

I have a well pump 1 hp 115v and need a 61b1d110189nnca start capacitor, do you have a replacement?
 Reply

A  Answered on 7/19/2019 by InyoPools Product Specialist Lennox H.

Hi, Mark. Unfortunately, I was unable to use that number to locate a replacement. If you can provide the uf/MFD and volt rating I can see if we have a replacement.
 Reply


?     Asked on 5/2/2019 by Ted Bell

I HAVE A NGM MOTOR START CAPACITOR 61B1D220124NNCA 124-148UF 220VAC E348072 LOOKING FOR A REPLACMENT Reply A Answered on 1/7/2019 by InyoPools Product Specialist Hector F. The replacement capacitor is part number 5270-14. Reply 5270-14 is 120 v not 220 volt. Still work ?
 Reply

A  Answered on 5/3/2019 by InyoPools Product Specialist Lennox H.

Hi, Ted. Unfortunately, it will not. We do not have a replacement for the capacitor that you're inquiring about.
 Reply


?     Asked on 4/7/2019 by Peter

I have the ust1202 pump which was just humming rather than starting up. The capacitor in it is a 124-149mf 165vac ngm 61b1d160124nnao. I tried a new capacitor with the same ratings and the motor started right up the pump ran for about 1 minute before the capacitor blew. Is this the correct capacitor for this motor? What would cause it to blow if is correct?
 Reply

A  Answered on 4/7/2019 by InyoPools Product Specialist Lennox H.

Hi, Peter. Since your motor immediately blew the capacitor the issue could be the motor. Starting with the winding, stationary switch and or the thermal overload. This capacitor is only rated at 125 VAC, it will not replace a 165 VAC which we do not have.
 Reply


?     Asked on 1/5/2019 by JASON

I HAVE A NGM MOTOR START CAPACITOR 61B1D220124NNCA 124-148UF 220VAC E348072 LOOKING FOR A REPLACMENT
 Reply

A  Answered on 1/7/2019 by InyoPools Product Specialist Lennox H.

Hi, Jason. We do not have a capacitor that is a match to the info provided.
 Reply

  • Commented on 6/3/2019 by Product Owner

    Can you confirm 5270-14 is the correct replacement for the NGM 124-148 mFD 220VAC start capacitor? The physical size is correct but the mFD and VAC ratings are significantly different. Thanks.

     Reply

  • Commented on 5/2/2019 by Product Owner

    Even though 570-14 says 120 volt not 220 volt ??
     Reply


?     Asked on 10/8/2018 by

I have a Hayward max flo pool pump with a malory 124-148 MFD 125 VAC start capacitor. Do I need replacement capacitor BC-124?
 Reply

A  Answered on 10/10/2018 by InyoPools Product Specialist Hector F.

It does look to be that the replacement capacitor is the BC-124 but you can always provide us with the motor model, part or catalog number via email at upload@inyopools.com or even call in and we can try and confirm that way as well. 
 Reply


?     Asked on 9/21/2018 by Gary

Will this work for a Century model k48N2N106A1
 Reply

A  Answered on 9/21/2018 by InyoPools Product Specialist Lennox H.

Hi, Gary. Yes, this BC-124 - Start Capacitor will work with the MOD K48N2N106A1 motor. 
 Reply


?     Asked on 7/24/2018 by

I have a Polaris booster pump/motor PB4-60. Does this capacitor go on top of the motor or inside of it?
 Reply

A  Answered on 7/24/2018 by InyoPools Product Specialist Lennox H.

Hi. Yes, this BC-124 is the correct replacement start capacitor. 
 Reply


?     Asked on 7/17/2018 by Justin

would this start capacitor work for Dual Speed pool/spa duty motor Century SP1520Z24ESC PART 7-193824-01 SERIAL 02315J2 VOLTS 115 HZ 60 Thanks
 Reply

A  Answered on 7/21/2018 by InyoPools Product Specialist Lennox H.

Hi, Justin. You can use either the BC-108 or this BC-124 Start Capacitor with your model motor. 
 Reply


?     Asked on 6/11/2018 by Chris

I have a NGM Motor Start Capacitor damaged during shipment of pool pump that I need to replace. Numbers I can make out are 61B1D2(1-?)0124NNC.... E348072 OP.T.MAX 70* C 50/60 124-148uf 220VAC..... Can I use this or do I need one rated at 220VAC? Pump will be wired at 220. Thanks
 Reply

A  Answered on 6/11/2018 by InyoPools Product Specialist Lennox H.

Hi, Chris. You can use this Start Capacitor - BC-124 as a replacement if the one that you're replacing is rated at 125VAC. The Capacitor rated is not tied to the operating voltage. 
 Reply


?     Asked on 6/10/2018 by Jon

Looking for a replacement for a NGM motor start capacitor 61b1d220124nnca 124-148uf 220vac Any help would be great!
 Reply

A  Answered on 6/14/2018 by InyoPools Product Specialist Lennox H.

Hi, Jon. Unfortunately, we do not have a capacitor that is a match to the info provided.
 Reply


?     Asked on 5/17/2018 by Denis Massa

I need a start capacitor for a Harris Pool Pump. Current Cap is NGM 61B1220124NNCA 220vac. I ordered ones but they are too big. I need approx. 2.75 high by 1.5 round.
 Reply

A  Answered on 5/17/2018 by InyoPools Product Specialist Lennox H.

Hi, Denis. Unfortunately, I was unable to use that number to locate a replacement. If you can provide the uf/MFD and volt rating I can see if we have a replacement. 
 Reply


?     Asked on 4/29/2018 by rodger

where can I find a 124-148 mfd capatiator or replacement
 Reply

A  Answered on 5/1/2018 by InyoPools Product Specialist Hector F.

We would need more information on the capacitor or the best would be the actual motor model, part, or catalog number to cross reference that part. 
 Reply


?     Asked on 7/18/2017 by

Can a capacitor rated @ 220vac 124-148uf be replaced with a cap rated @ 125vac 124-148uf if i'm running it with input power of 110 volts? It is for a pool moter rated to run either 110 or 220.
 Reply

A  Answered on 7/19/2017 by InyoPools Product Specialist Lennox H.

Hi. Yes, a capacitor rated at 220vac can be used to replace a 125vac capacitor.The capacitor is not tied to the motor's operating voltage. 
 Reply


?     Asked on 5/24/2017 by james o'connor

where do I find a ngm motor start capacitor 61b1d220124nnca 124-220vac
 Reply

A  Answered on 5/26/2017 by InyoPools Product Specialist Lennox H.

Hi, James. We do not have a capacitor that is a match to the info provided. If you can provide the motor model and manufacturer I can see what I can find out.
 Reply


?     Asked on 9/12/2016 by John Thompson

the capacitor from my pool pump has the following info on it: 610807-001 60hz 124uF 125VAC do you have a capacitor that would work?
 Reply

A  Answered on 9/13/2016 by InyoPools Product Specialist Scott W.

Yes, that would be the correct capacitor according to the part number you provided.
 Reply


?     Asked on 6/19/2016 by

I need to replace the capacitor for my pool vacuum motor. The information on the motor is gone. The information on the capacitor is NGM 61B1D160124NNME, 124-149 MFD, 165 V AC OP. T. MAX 65 C 50-60 Hz lot 61080719 14/03/2006 157697-28 I do not know if this is start or run capacitor. Which capacitor replacement should I buy?
 Reply

A  Answered on 6/26/2016 by InyoPools Product Specialist Megan C.

Hi, Based on the on the info provided you're in need of a stat capacitor which the BC-124 will replace.
 Reply

  • Commented on 5/25/2020 by Product Owner

    I have the same capacitor that needs to be replaced (165 vac) . However, the capacitor you are recommending has a lower voltage rating (125 v). Am I missing something here?
     Reply


?     Asked on 12/30/2015 by Ray Smith

I need the part number for a start capacitor for Pool Pump Motor UST 1252. I called the technical help line and they told me to buy capacitor BC 124. BC 124 is rated for 125 VAC and Pump UST 1252 is 250 VAC. The start capacitor I am replacing is rated for 36uF and 250 VAC. Please let me know what replacement start capacitor I need to order. Thank you, Ray Smith
 Reply

A  Answered on 12/30/2015 by InyoPools Product Specialist Joe S.

Hello Ray, the Capacitor you will need for a UST1252 would be Part # 5270-09 MFD 220-250v 36-43 (bc36m-250-s).
 Reply


?     Asked on 9/2/2015 by james simpson

will this capacitor work on 220
 Reply

A  Answered on 9/3/2015 by InyoPools Product Specialist Lennox H.

Hi James, If the motor is wired for 220 volts this capacitor will work if it's the correct one needed for that motor.
 Reply


?     Asked on 1/23/2012 by Guest

I need to replace my the capacitor on my 1.5HP pool pump. Do you carry the capacitor I need?
 Reply

A  Answered on 1/23/2012 by InyoPools Product Specialist Patrick P.

Please note that capacitors store an electric charge and should be handled with the utmost caution and care. We do not encourage handling a capacitor without any type of safety measures in place and highly recommend contacting a professional service company for repair/replacement. For those that feel comfortable changing the capacitor here's  >How to replace a pool pump capacitor. In order to match up the capacitor you will need more specifications on the capacitor. You will need to match the voltage, the MFD, whether or not the capacitor is a >run or >start type and the actual dimensions of the capacitor body.
 Reply


Top

Review Summary

 (Average 5  out of 5 stars)
3 Rating
5 star:
 
(3)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)

The Most Recent Reviews