Hayward 24 Sq. Ft. DE Grid Assembly for Pro Grid and Micro Clear - DEX2420DC

$359.99

IN STOCK
FREE SHIPPING

Part # 4811-35

By Hayward Pool Products

  5 Average  

Details

Top

Part # 4811-35

Manufacturer Code DEX2420DC

Dimensions 17" L x 17" W x 22" D

Alternate Part #'s DEX2400DC, DEX2420DC

Product Description

Replacement DE Grid Assembly for the 24 Sq. Ft. Hayward Micro Clear and Pro Grid DE Filters. Every 3-5 years you will need to replace the D.E Grids in your D.E pool filter if you have the 24 Sq. Ft. Hayward DE filter than this is the item you will require. The great thing about this assembly is that is pre-assembled so no headaches trying to arrange the grids in the proper locations.

Commonly Used On:

  • Hayward 24 Sq. Ft. Pro Grid DE Filter (DE2420)
  • Hayward 24 Sq. Ft. Micro Clear DE Filter (DE2400)

DE Grid Assembly Includes:

  • 8 Pre-Assembled DE Grids
  • Top Manifold
  • Bottom Grid Locator Plate
  • Retainer Rod
  • Breather Tube
Top

?     Asked on 6/6/2019 by Tom

I bought my unit used. The guy who sold it said it was Hayward 3620. Debris probably De is entering the pool probably because there may be a tear in filters. The only number I can find is DE 2420L and 2400-Z-10. The serial number is hard to read. Would I need 2420 replacement filters and if so do you sell them and how much? Thanks, Tom

 Reply

A  Answered on 6/6/2019 by InyoPools Product Specialist Hector F.

We would not be able to tell based on these images but there may be a filter model number on the bottom right of the filter label and or you can measure the grid height and compare to the dimensions listed on the parts diagram of the filter here.
 Reply


?     Asked on 4/28/2019 by

my part # shows De2420c...How can I be sure this is the proper unit to purchase?

 Reply

A  Answered on 4/29/2019 by InyoPools Product Specialist Lennox H.

Hi. The number in the picture is of the Top Manifold. Use our How to determine D.E. Filter Grid size guide to assist you. 
 Reply


?     Asked on 9/18/2018 by dave

if one is broken up top And the knob is broken off in the manifold , and the other 6 are not broken do you have to replace all 8, there all origanal from 2004
 Reply

A  Answered on 9/18/2018 by InyoPools Product Specialist Lennox H.

Hi, Dave. With the grids being 14 years old, I would recommend replacing the entire assembly. It will be convenient. 
 Reply


?     Asked on 7/18/2017 by P. Turk

Do you have to use waste to vacuum? If we use the regular cycle to vacuum, the dirt goes right through the filter and out the outflow back into the pool. Or does that mean we need to replace the insides of the filter? DE Progrid Series 2420. Middle of July and we can't get the pool clean. The Diatomacious Earth blows right through also when we put it in.
 Reply

A  Answered on 7/18/2017 by InyoPools Product Specialist Lennox H.

Hi, P. Turk. You can vacuum when the filter is in the waste or filtration position. A torn grid or grids, a cracked manifold are a few things that can cause DE and debris to get back into the pool. Our Getting DE Powder Back in Your Pool Blog has additional info that you use to resolve this issue.
 Reply


?     Asked on 6/15/2017 by Terry

Will this work for my Hayward DE2400 model?
 Reply

A  Answered on 6/18/2017 by InyoPools Product Specialist Hector F.

Yes, this grid assembly will work for your filter model.
 Reply


?     Asked on 6/2/2017 by SHAUN LANE

I NEED TO REPLACE FILTER GRID FOR A HAYWARD DE2420 INGROUND. WHICH FILTER GRID DO I NEED...
 Reply

A  Answered on 6/2/2017 by InyoPools Product Specialist Hector F.

The single full size filter grid is part number FG1002, the single partial grid is part number PG1902, the grid pack is part number FG1002PACK, and the grid assembly would be part number 4811-35.
 Reply


?     Asked on 4/6/2017 by Jeffrey Silva

I want to replace my grids. The only # I could find was a DE2420C engraved on top of the manifold. Which one do I need for replacement?
 Reply

A  Answered on 4/6/2017 by InyoPools Product Specialist Scott W.

The correct replacement grids is part number FG1002PACK.
 Reply


?     Asked on 6/20/2016 by Carl Molt

is the DE2400C replaced by the DEX2400C assembly
 Reply

A  Answered on 6/24/2016 by InyoPools Product Specialist Lennox H.

Hi Carl, The Filter Assembly DEX2400C is the same replacement for the DE2400C.
 Reply


?     Asked on 9/12/2015 by Ivan

Is this the whole assembly?? Or just the grids? What does this come with? Everything in picture??
 Reply

A  Answered on 9/16/2015 by InyoPools Product Specialist Lennox H.

Hi Ivan, The Filter Element Assembly (DEX2400DC) is the complete filter assembly which includes all 8 grids, the manifold with air relief, the grid spacer, and the retaining rod. That's everything that is shown in the picture. 
 Reply


?     Asked on 9/6/2015 by Lloyd

Are these the filters I need for Hayward DE 242?
 Reply

A  Answered on 9/9/2015 by InyoPools Product Specialist Lennox H.

Hi Lloyd, The Filter Element Assembly (DEX2400DC) would be for the DE2420 model filter.
 Reply


Top

Review Summary

 (Average 5  out of 5 stars)
1 Ratings
5 star:
 
(1)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)