By Thermcore Products


Details

Top

Part # 9140-0

Manufacturer Code C2550-0002ET

Dimensions 18.5" L x 3.75" W x 3.5" D

Alternate Part #'s 20-00224, 2000224, 483000, 6FLO2, C2550-0000, C2550-0002ET, C25500000, C2550002ET

Product Description

INYO # 9140-0 THERMCORE # C2550-0002ET THIS IS A 15", 2.25" DIAMETER STAINLESS STEEL FLOW THRU HEATER THIS WAS ORIGINALLY MADE BY AQUATEMP UNDER THE PART NUMBER 20-00224. THE ORIGINAL 20-00224 IS NO LONGER AVAILABLE, BUT THIS IS EXACTLY THE SAME HEATER THIS ALSO REPLACES THE RELATED METALS HEATER # C2550-0002ET LENGTH: 15" (LENGTH OF TUBE ONLY FROM FLANGE TO FLANGE) DIAMETER: 2.25" ENDS: FLANGED WITH UNIONS WATTAGE: 5.5 KW, 240 VOLTS (1.4 KW AT 120 VOLTS) TAILPIECES: (2) 2" SLIP TAILPIECES, REPLACABLE UNION NUTS, GASKETS (THREADS ON 2" UNION TAILPIECES ACTUALLY MEASURE 3-1/16" DIAMETER)

********************************************************************************************************************************

DETAIL MEASUREMENTS - THE MEASUREMENTS SHOWN ARE FROM THE FLANGE CLOSEST TO THE ELEMENT LEAD TO THE CENTER LINE OF THE ITEM ALL OF THE ITEMS SHOWN BELOW ARE IN LINE WITH THE ELEMENT LEADS ON THIS HEATER ELEMENT LEADS: 2) THESE ARE REPLACEABLE AND INCLUDE ELECTRICAL CONNECTER NUTS AND WASHERS 1ST LEAD 4-1/4" FROM FLANGE 2ND LEAD 5-1/2" FROM FLANGE THERMOWELLS: (2) THRU WELLS, 5/16" INSIDE, THESE ARE IN LINE WITH THE HEATER ELEMENT LEADS 1ST WELL 8-1/8" FROM FLANGE 2ND WELL 9-1/8" FROM FLANGE PRESSURE SWITCH TAP: 2-7/8" FROM FLANGE 1/8" FEMALE THREADS, THIS COMES PLUGGED, BUT PLUG MAY BE REMOVED (1/8" THREADS ACTUALLY MEASURE ABOUT 7/16" DIAMETER) MOUNTING STUDS: (2) THREADED MOUNTING STUDS WITH NUTS AND LOCKWASHERS 1ST STUD 1-15/16" FROM FLANGE 2ND STUD 12-7/8" FROM FLANGE
Top

?     Asked on 9/29/2018by William Fogle

Will this replace mr Spa Inline Heater, 1.5 Kw, 120v" - 1.5KMRSPA ??
 Reply

A  Answered on 10/2/2018 by InyoPools Product Specialist Lennox H.

Hi, William. It can with some replumbing and reconfiguration. 
 Reply