Part # 5002-05B
Manufacturer Code 355369
Dimensions 4.86" X 0.4"
Alternate Part #'s 35-110-1614, 355369, 40392, 788379658786, PAC-101-3139, PAC1013139
Impeller 1.0 HP Full Rate and 1.5 HP Uprate - 355369
Frequently Bought with this Impeller
WHAT DIFFUSER SHOULD I USED WITH THE FOLLOWING IMPELLER
355369, 355315 AND 355544
I have an impeller part number 35-5369, supposedly rated for a 1.5 UR motor. My motor, however has an SR of 1.1, rendering the HP at 1.65. This is a crazy, crazy system but it is what it is, I guess. Is the pump too strong for the impeller (am I wasting power)? Thank you!
As long as your motor has a total horsepower of at or slightly above 1.5 then a 1.5 rated hp impeller is correct to have on it.
Regarding the impeller, what's the difference between the medium and high head? How do I know which one is right for my 1.5 hp challenger pump?
Medium and High Head depends on Challenger Pump model number. Pump model information would be located on the housing side of the pump, where plumbing attaches too. If pump model begins with CF...., then that's considered a Medium Head or if pump model begins with CH..., then that's considered a High Head.
Less than 1 hr
My impeller was stripped out and then had to replace it. Ordered the new impeller from INYO (great service and product was delivered ahead of schedule) and was able to follow one if the videos on replacing the impeller to allow me to save time and money doing it myself.