Key, Cover & Handle Assembly 2"- Black - SPX0715BA3

$109.99

IN STOCK
FREE SHIPPING

Part # 4701-15B

By Hayward Pool Products

  4.5 Average  

Details

Top

Part # 4701-15B

Manufacturer Code SPX0715BA3

Dimensions 10" L x 8" W x 6" D

Alternate Part #'s SP715BA3, SPX0715BA3, SPX715BA3

Product Description

KEY/COVER & HANDLE ASSY BLK - SPX0715BA3

Top

?     Asked on 8/10/2019 by Jay

I have a Hayward vari-flo Valve sp715xr50. Handle broke off but was hard to turn previously (15 years old). I need to replace the handle but wondering if I should replace all the gaskets and o-rings at the same time. What should I purchase?
 Reply

A  Answered on 8/16/2019 by InyoPools Product Specialist Hector F.

You do not necessarily have to replace the seals and gaskets as well unless you can tell that the valve is leaking out of the waste port and or the handle does not spring back into position when released. If you decide to replace those other seals and gaskets you can use APCK1034S which includes the spring or APCK1034 which will not. 
 Reply


?     Asked on 8/2/2019 by Tanner Rule

How about the spring and little o-rings from SP17 Multiport Valve O-ring kit?
 Reply

A  Answered on 10/2/2019 by InyoPools Product Specialist Hector F.

Yes, the spring and small o rings on the valve stem are included in this assembly. 
 Reply


?     Asked on 8/2/2019 by Tanner Rule

This does not include the spider gasket. Does it include the spring & other parts that are in the multiport kit APCK1034S ? If not then I may opt to buy the whole valve assembly

 Reply

A  Answered on 8/2/2019 by InyoPools Product Specialist Lennox H.

Hi, Tanner. This Cover Assembly - SPX0715BA3 is the correct replacement. The Cover O-ring - SPX0715Z1 and the Valve Seat Gasket - SPX0715D are not included. 
 Reply


?     Asked on 7/12/2019 by Nick

Need Hayward part SP0715C DO YOU HAVE IT?

 Reply

A  Answered on 7/12/2019 by InyoPools Product Specialist Lennox H.

Hi, Nick. Yes, we do have the Key & Stem Assy - Noryl - SPX0715C
 Reply


?     Asked on 6/30/2019 by CC

I have a SP0715G11M. Will this replace it? And---the part that broke on mine is the stem the handle connects to. a) I could not find the bottom part alone and b) the tiny O-ring and gasket around the top part, where the handle goes through, have fallen out and I'm not sure how they go back. Should I just get the whole thing and stop trying to save money? Oops, the big O-ring just fell down the hole into the pipes. Guess that answers that question.
 Reply

A  Answered on 6/30/2019 by InyoPools Product Specialist Steve M.

Hi, CC. This Cover Assembly - SPX0715BA3 will fit your valve. It would b best to replace the valve. In order to locate the complete valve, I will need to know the model of your filter.
 Reply

  • Commented on 7/2/2019 by Product Owner

    Pictures attached

     Reply

  • Commented on 7/1/2019 by Product Owner

    It worked fine before this. Somebody who did not know how to backwash forced the handle and broke it.

     Reply

  • Commented on 6/30/2019 by Product Owner

    Thank you! Here are photos. You can see the broken part (a dogsitter tried to backwash and did not know how, ended up forcing it). By vale please tell me you don't mean everything up to the pipes...It is about 2 to 3 years old.

     Reply


?     Asked on 6/29/2019 by Michael

Hi there. When I move my Hayward SP0715G11M into normal running position, it leaks water out the waste output. Do I need a new gasket, or entirely new valve head? It’s also dripping where it connects to the filter... new o-ring? Thanks!

 Reply

A  Answered on 6/30/2019 by InyoPools Product Specialist Lennox H.

Hi, Michael. Your issues can be resolved by replacing the o-ring and gaskets which are available in the SP715 Multi Port Valve Tune Up Kit - APCK1034 (W/O Spring) or APCK1034S (w/ Spring) along with the Valve Tank O-ring - GMX600F.
 Reply


?     Asked on 6/24/2019 by Melissa Rotramel

I want to clarify exactly what comes with this Hayward Key cover and assembly replacement. My old Hayward SP0715X62 MPV is old and leaking from top and backwash side, so I want to replace all the guts, O rings and gaskets.Therefore, if I purchase this unit, do I need to purchase anything else to effectively replace all the possible causes for leaks (sans the lower body which is in good shape)?
 Reply

A  Answered on 6/25/2019 by InyoPools Product Specialist Kevin G.

In addition to this, you will also need to replace the Cover O-ring - SPX0715Z1 and Valve Seat Gasket - SPX715D.
 Reply


?     Asked on 6/24/2019 by CAROLYN

will this part replace SP710XR50 valve key cover and handle
 Reply

A  Answered on 6/24/2019 by InyoPools Product Specialist Michelle B.

Hello,This will be the part you will need for your multiport valve. http://www.inyopools.com/Products/07501352020280.htm
 Reply


?     Asked on 6/23/2019 by Joe

Will this replace upper control for my SP071620T? from the picture, it only has 10 bolts, mine has 11. Do you have replacement upper part for SP071620T?

 Reply

A  Answered on 6/23/2019 by InyoPools Product Specialist Lennox H.

Hi, Joe. Yes, this Key, Cover & Handle Assembly 2"- Black - SPX0715BA3 will fit your SP071620T valve. . 
 Reply


?     Asked on 2/22/2019 by Claire Schrimpf

We have a Hayward model S-310S filter with a Hayward multi port valve, model SP71. Even though one is not supposed to change valve positions while the filter is running, I did and something cracked with water squirting out everywhere. Will Hayward key cover and handle assembly #SPX0715BA3 work for us? Thank you for your help!
 Reply

A  Answered on 2/26/2019 by InyoPools Product Specialist Lennox H.

Hi, Claire. In order to confirm, we will need to know the exact filter model your valve or the plumbing size of your valve.
 Reply


?     Asked on 5/28/2018 by Christine Lawrence

I think this is the replacement for me, I have the sp715xr50. Is the only thing I need to do is unscrew the screws around the top. I will probably have to do this myself. I am handy, but not a mechanic. Can I do this myself?
 Reply

A  Answered on 5/29/2018 by InyoPools Product Specialist Alex V.

Christine, You can use this part but filter position on this key assembly is at the 12 o clock position and backwash is at 6 o clock. On a Hayward d.e. filter, those positions are reversed. So when you install this, you will need to make sure those settings are at the correct orientation on the valve. 
 Reply


?     Asked on 4/28/2018 by John

Good Afternoon, my Key, Cover Handle and Assembly needs replacing; the model number SP715XR50. will this product replace this part that is cracked. Thank-you
 Reply

A  Answered on 4/29/2018 by InyoPools Product Specialist Lennox H.

Hi, John. Yes, this is the correct Key Cover and Handle Assy for your valve. You will also need to replace the Cover O-ring - SPX0715Z1 and Valve Seat Gasket - SPX715D
 Reply


?     Asked on 9/26/2017 by sammy

I am using the model # SP071620TFV, the top part is cracked under the label area what part do i need to replace and what is the part number
 Reply

A  Answered on 9/27/2017 by InyoPools Product Specialist Lennox H.

Hi, Sammy. This Cover & Handle Assembly - SPX0715BA3 is the correct replacement part for your valve. I would also recommend getting the Cover O-ring - SPX0715Z1 and the Valve Seat Gasket - SPX0715D
 Reply


?     Asked on 6/11/2017 by Diana

The whole Hadley broke of my valve would this be the replacement for model # SP0715x62 Serial# 21120710002807010
 Reply

A  Answered on 6/13/2017 by InyoPools Product Specialist Lennox H.

Hi, Diana. This Key-Cover & Handle Assembly - SPX0715BA3 will fit the SP0715x62 valve.
 Reply


?     Asked on 5/24/2017 by jesse

the handle sp710 fl broke off from my valve sp-715-c. I do not believe its 1 1/2 the top plate has 10 screws not 6. I need the handle and valve.
 Reply

A  Answered on 5/25/2017 by InyoPools Product Specialist Scott W.

Part number 4701-15B is the correct replacement insides for that valve.
 Reply


?     Asked on 5/6/2017 by Keith virga

I want to replace a hayward multivalve. The handle has sp710 fl and pat #3640310. It measures almost 9 " across. I believe 2 inch about 25 years old. I just want to replace the top assembly.
 Reply

A  Answered on 5/6/2017 by InyoPools Product Specialist Lennox H.

Hi, Keith. The SP710 has 1-1/2" ports not 2" and will use p/n SPX0710XBA17 (Cover Handle Assy). The Diverter Gasket - SPX0710XD and Cover O-ring - SPX0710XZ3 are not included with p/n SPX0710XBA17.
 Reply


?     Asked on 4/30/2017 by george diienno

will this work as replacement for Hayward 715XR50
 Reply

A  Answered on 4/30/2017 by InyoPools Product Specialist Scott W.

Yes, that is a replacement key, over and handle assembly for you 715XR50.
 Reply


?     Asked on 3/17/2017 by

I am using the model # SP071620TFV, and there is some water leaking on the top where the Handle connects to the cover, which parts to I need to replace to stop the leak?
 Reply

A  Answered on 3/17/2017 by InyoPools Product Specialist Andy O.

Hello- If you look at the Hayward Multiport Valve - 2" Models SP715 & SP716 Parts Diagram you would want to replace Keys number 3 part # 4700-03x,8 part # 4700-08x, 8A part # 4700-08A, and 9 part # 4700-06.
 Reply


?     Asked on 2/26/2017 by Karen Swantek

I, too, noticed that the label on my Hayward Vari-Flo SP715XR50 has the labels reversed from what you show. It shows "backwash" at the top by the main label and "filter" at the bottom. Is this going to cause an issue? And if I order this do I need to order a new spider gasket, also or does it come with the replacement? I am ready to order but do I need to install so label is at bottom for filter?
 Reply

A  Answered on 2/27/2017 by InyoPools Product Specialist Hector F.

As long as you have the model SP715XR50 valve then this valve assembly will work and it does not come with the spider gasket part number 4701-10.
 Reply


?     Asked on 2/12/2017 by mike

does the spx0715ba3 work on the sf-715 a50 valve? thanks
 Reply

A  Answered on 2/13/2017 by InyoPools Product Specialist Scott W.

Yes that key, cover and handle assembly will work for your valve.
 Reply


?     Asked on 10/30/2016 by Karen Swantek

I tried the tuneup kit with the SP0715 but it did not seem to fix problem, even replacing spider gasket. I want to purchase this insert unit. What else do I need to purchase with this Key cover and handle kit so I can have all the parts needed. Also, will I have to disassemble this in order to add additonal o-rings etc. or can I just drop it in with the cover gasket.
 Reply

A  Answered on 10/31/2016 by InyoPools Product Specialist Adam Y.

Good Morning Karen, This is the entire top piece. I just recommend lubricating the o-rings and gasket very good when putting this top on. If you don't have any this is it.Magic Lube O-ring Lubricant 1 Oz. Teflon - 630
 Reply


?     Asked on 9/19/2016 by Victor Boyles

Can this Key Assembly be used with The Aqua Ultraviolet Ultima ii 2000 Filter.
 Reply

A  Answered on 9/20/2016 by InyoPools Product Specialist Stacey M.

Hello Victor, the 4701-15B key assy will not work on an Aqua Ultraviolet 200 series. Depending on whether you have 1-1/2" part A50061 or 2" part A50062, to get parts from Ultima 800-454-2725.
 Reply


?     Asked on 7/4/2016 by Rick

Does the spx715ba3 work with the SP71621 Valve head assembly?
 Reply

A  Answered on 7/8/2016 by InyoPools Product Specialist Lennox H.

Hi Rick, This Key Cover & Handle Assy (SPX0715BA3) can be used with the Hayward SP071621 Valve.
 Reply


?     Asked on 3/7/2016 by Greg

My assembly's labels are the opposite of those shown. Will this assembly work with my pump? Will I have to install this replacement "upside down"?
 Reply

A  Answered on 3/9/2016 by InyoPools Product Specialist Lennox H.

Hi Greg, There is only one way to install this item. If you can provide the model of the valve that you have we can confirm if this is the correct part for that valve.
 Reply


?     Asked on 1/10/2016 by

Can the key be turned in either direction when turned to backwash? Are there specific directions when turning the key?
 Reply

A  Answered on 1/12/2016 by InyoPools Product Specialist Lennox H.

Hi, It's better to turn the handle clockwise. Make sure that the pump is "Off" before turning the valve to the desired position, then turn the pump "On." You can review our How To: Backwash a Hayward DE Filter for a instructions.
 Reply


?     Asked on 8/15/2015 by Diane

I purchased the cover kit SP715BA and put in on - and it leaked. Do you have a diagram on how to line up the piece.
 Reply

A  Answered on 8/15/2015 by InyoPools Product Specialist Bob D.

Hi Diane. Sorry about the trouble. Here is a link to the diagram of the part from Hayward. You can also reference this instruction sheet from a similar Hayward assembly. Hope this helps and best of luck.
 Reply


?     Asked on 8/3/2015 by Sam Lo

Is the SPX0715BA3 a proper parts replacement for a Hayward SP715XR50 vari-flo valve? Thanks.
 Reply

A  Answered on 8/4/2015 by InyoPools Product Specialist Patrick P.

Hi Sam, Yes the SPX0715BA3 handle assembly is the correct replacement handle for the Hayward SP715XR50 vari-flo valve.
 Reply


?     Asked on 6/17/2015 by

Does this fit the SP 715 A 50 ?
 Reply

A  Answered on 6/18/2015 by InyoPools Product Specialist Patrick P.

Yes this would be the proper replacement for the SP715A50.
 Reply


?     Asked on 6/9/2015 by Chris

http://www.inyopools.com/Products/07501352023015.htm Does above replace my assembly require gasket?
 Reply

A  Answered on 6/9/2015 by InyoPools Product Specialist Lennox H.

Chris, The Key, Cover & Handle Assembly 2"- Black (SPX0715BA3) does not come with any gasket or o-rings for the Hayward Multiport Valve - 2" SP715 & SP716 Models. The  Valve Seat Gasket 2in (O-322), the Cover O-ring (SPX715Z1) and other parts can be found via the Hayward Multiport Valve - 2" Models SP715 & SP716 Diagram.
 Reply


?     Asked on 4/17/2013 by Guest

Does part # 4701-15B, "Key, Cover & Handle Assembly 2"- Black (spx0715ba3)" come with a cover o-ring?
 Reply

A  Answered on 4/17/2013 by InyoPools Product Specialist Patrick P.

Part # 4701-15B, "Key, Cover & Handle Assembly 2", does not come with a cover o-ring, as cover o-ring is sold separately, which is part # 4701-05A.
 Reply


?     Asked on 4/16/2013 by Guest

Does part # 4701-15B, "Key, Cover & Handle Assembly 2"- Black (spx0715ba3)" come with a spider gasket?
 Reply

A  Answered on 4/16/2013 by InyoPools Product Specialist Patrick P.

Part # 4701-15B, "Key, Cover & Handle Assembly 2", does not come with the spider gasket, as spider gasket is sold separately, which is part # 4701-10.
 Reply


Top
Difficulty

Est. Repair Time

1 to 2 hrs

Tools Needed

Screwdriver, Socket Set

1     0

I BROKE OFF THE HANDLE ON MY OLD SAND FILTER TOP. ORDERED NEW ONE FROM INYOPOOLS.

Written on 12/13/2017 by Guest

EASY REPLACEMENT. REMOVED HOLD DOWN BOLTS (10) REMOVED OLD COVER AND TOP. INSTALLED NEW UNIT AND REPLACED BOLTS. CHECKED OPERATION AND ALL WAS GOOD.

Were these instructions helpful? 
 

Top

Review Summary

 (Average 4.5  out of 5 stars)
4 Rating
5 star:
 
(2)
4 star:
 
(2)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)

The Most Helpful Review


The Most Recent Reviews