Lateral (new Pivot Style) Sx200qn (sx200qn)

$11.49

IN STOCK

Part # 4800-30

By Hayward Pool Products

  5 Average  

Details

Top

Part # 4800-30

Manufacturer Code SX200QN

Dimensions 5" X 3/4"

Alternate Part #'s SX200QN

Product Description

INYO # 4800-30 HAYWARD # SX200QN

************************************************

GENERAL DESCRIPTION: PIVOT TYPE LATERAL THIS IS A HAYWARD PIVOT TYPE LATERAL USED ON A NUMBER OF FILTERS. THERE IS A BALL WITH A LOCKING TAB AT ONE END OF THE LATERAL. THE BALL FITS INTO THE HUB AND ALLOWS THE LATERAL TO BE SWIVELED UP AND DOWN TO MAKE REPLACING THE STANDPIPE ASSEMBLY A LOT EASIER. WHEN THE STANDPIPE IS IN PLACE, THE LATERAL IS SWIVELED BACK DOWN TO OPERATING POSITION

************************************************

MATERIAL: VARIOUS COLOR PLASTIC TYPE: SWIVEL PIVOT

************************************************

DIMENSIONS: OUTSIDE DIAMETER 7/8" (A) DIAMETER OF THE MAIN PART THE BALL IS ABOUT 1-1/4" X 1-3/8" THE BALL ADDS 1" TO THE TOTAL LENGTH OF THE LATERAL TOTAL LENGTH: 5-1/8" (B) LENGTH WITHOUT BALL: 4-1/8"

************************************************

MARKINGS: THERE ARE NO MARKINGS

Top

?     Asked on 8/8/2018 by

what would be the cause of sand filtering back into pool
 Reply

A  Answered on 8/9/2018 by InyoPools Product Specialist Lennox H.

Hi. That can be caused by a few things, check out these DIY Resources, Sand in Your Pool?, and How To Reduce Sand in Your Pool to uses as a great reference. 
 Reply


?     Asked on 7/13/2017 by Nancy

Would this work on a swimpro high-rate sad filter
 Reply

A  Answered on 7/13/2017 by InyoPools Product Specialist Patrick P.

Hi Nancy, this lateral does fit a Swim Pro Sand Filter but there are a few different models of Swim Pro Filters and each uses a different lateral. Do you know the model # of your Swim Pro Filter? Can you supply the length of your lateral?
 Reply


?     Asked on 7/5/2015 by john

I have a S180T model, is this the correct item for mine filter?
 Reply

A  Answered on 7/6/2015 by InyoPools Product Specialist Dennis R.

Hi John,  yes this is the correct lateral (Pivot Style) for a S180T Haywared Pro Top model built after 2004.  For models built in 2004 and before, you would want the threaded lateral.. Note: This shorter lateral (~5") is only used on the S180T). The other models listed under the Pro Top Series use the longer lateral (7")
 Reply


?     Asked on 5/25/2015 by

I have model #S166T. Does this part fit in that model? It is around 10 years old. I keep getting sand coming through the filter.
 Reply

A  Answered on 5/25/2015 by InyoPools Product Specialist Patrick P.

The SX164DA Lateral Assembly would be the correct lateral assembly for the Hayward S166T Sand Filter.
 Reply


Top

Review Summary

 (Average 5  out of 5 stars)
1 Ratings
5 star:
 
(1)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)