Pentair Clean & Clear Lid, 50 & 100 sqft, Almond (After-11/98) - 178553

$129.99

IN STOCK
FREE SHIPPING

Part # 4652-01B

By Pentair Pool Products


Details

Top

Part # 4652-01B

Manufacturer Code 178553

Dimensions 12.5" L x 12.5" W x 5.5" D

Alternate Part #'s 178553

Product Description

Lid, 50 & 100 sqft, Almond (After-11/98) - 178553

Top

?     Asked on 10/26/2020 by Larry

I have developed a pinhole leak in the dome of my filter. I believe the part number is 178744 (Rev A) Can I replace it and at what cost
 Reply

A  Answered on 10/26/2020 by InyoPools Product Specialist Joe S.

Hello Larry, yes the Pentair Pool Products Lid, 50 & 100 sqft, Almond (After-11/98) - 178553 would be the correct replacement.
 Reply


?     Asked on 4/6/2020 by Roberta Matthews

The lid on our pool filter is cracked, it is a Pentair. The diameter of our filter is 12” height without to top of canister, 33 inches to the top of the canister and 37 inches to the top of the relief valve.Is this the replacement lid? If so does it come with the replacement gasket? Do you have the entire filter available? What is your return policy? What is the price of the lid? The entire filter if available?
 Reply

A  Answered on 4/6/2020 by InyoPools Product Specialist Patrick P.

Could you send us a few photos? A close up shot of the label on the side of the filter as well as wide shot showing the complete filter. To supply photos simply click the reply link below and upload your photos. Once we get those photos we can make the proper recommendation.
 Reply


?     Asked on 11/2/2019 by Frank J Marsico

Hi is the Pentair filter lid part no. 178553 compatible with lid part no. 178548?
 Reply

A  Answered on 11/4/2019 by InyoPools Product Specialist Lennox H.

Hi, Frank. They're NOT compatible. 
 Reply


?     Asked on 7/29/2019 by Lauren L. Fuller

Hi This looks like my lid but I want to make sure. My lid has cracks and is leaking but the rest of the filter is good. It has several numbers. The Pentair sticker says p/n 178555 REV E and the Serial number is 0194289080340p with another number p/n 160316 FLT CNC 100sf? Is this the correct top?
 Reply

A  Answered on 7/29/2019 by InyoPools Product Specialist Lennox H.

Hi, Lauren. This is the correct replacement Lid for your model filter. 
 Reply

  • Commented on 7/29/2019 by Product Owner

    Thank you.
     Reply


?     Asked on 6/21/2019 by Betty

Will this lid fit my Pentair Model CC100 filter? I have leaks and pin hole leaks in the top lid. Thank you
 Reply

A  Answered on 6/21/2019 by InyoPools Product Specialist Matt S.

Yes, this lid is the correct replacement for the Pentair Clean & Clear 100.
 Reply


?     Asked on 5/18/2018 by richard wayne neudigate

I need the tank itself.
 Reply

A  Answered on 5/19/2018 by InyoPools Product Specialist Lennox H.

Hi, Richard. To locate the lower bottom tank, see the part listing for Pentair Clean & Clear/Predator System
 Reply


?     Asked on 2/20/2018 by Chris

(178553)Hello. I have ? Thanksa really old top and from what I see, the top has a serial number (178555) would this top work for my model? Thanks
 Reply

A  Answered on 2/21/2018 by InyoPools Product Specialist Joe S.

Good day, yes the Lid, 50 & 100 Sq Ft, Almond After 11/98 (178553) would be the replacement needed for your model.
 Reply


?     Asked on 8/6/2015 by

i need the correct o ring that goes with this cover, i have been given the correct diameter but was too thick around and made putting cover back on difficult
 Reply

A  Answered on 8/8/2015 by InyoPools Product Specialist Lennox H.

Hi, The Predator/Clean and Clear Tank O-ring (447) will be the correct o-ring for the 50 & 100 Sq Ft Lid After 11/98 (178553).
 Reply


Top

Review Summary

 (Average 0  out of 5 stars)
0 Rating
5 star:
 
(0)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)