Part # 4666-10
Manufacturer Code 42285007R
Dimensions 13.75" X 12.19"
Alternate Part #'s 11253, 42285007, 42285007R000
INYO # 4666-10JACUZZI # 42-2850-07 THIS IS THE ONE PIECE PLASTIC LOCKING RING USED ON THE CFR, EF, AND LANDSLIDE FILTERS. THIS ALSO INCLUDES THE SMALL YELLOW PLASTIC LOCK. THIS IS SLIGHTLY SMALLER AT THE TOP. AT ABOUT THE CENTER OF THE RING THERE IS A VERY DISTINCTIVE SPOT WHERE THE RING TAPERS INWARD A BIT. THIS HAS 2 OR 3 THREADS ON THE INSIDE. THE NUMBER OF THREADS VARIES ON THE INSIDE. THERE ARE 4 VERY SMALL TRIANGULAR EXTENSIONS THAT ARE EVENLY SPACED AROUND THE BOTTOM. THESE ARE ABOUT 1" LONG X 1/8" TALL.
***********************************************
DIMENSIONS: OUTSIDE DIAMETER: 13-5/8" (AT THE BOTTOM) INSIDE DIAMETER: 13" (AT THE BOTTOM) OUTSIDE DIAMETER: 13-1/8" (AT THE TOP) INSIDE DIAMETER: 12-1/4" (AT THE TOP) HEIGHT: 2-3/16" (NOT INCLUDING EXTENSIONS)
***********************************************
MARKINGS: "11253" IS MOLDED INTO THE BOTTOM OF THE RING
Will this lock ring fit a LS 70 filter?
Reply
That is the correct lock ring for the Jacuzzi LS40, 55 and 70. Here is the Parts Breakdown for the Jacuzzi Landslide DE Filter.
Reply
I have the jacuzi splash pac with the black nut ring that goes on a gray body. Should there be a gasket in between. The locknut and body? It leaks but i dont remember having one. .I have an O ring inside the rim
Reply
Marlene, There is a Tank Body O-ring that goes between the body and lid and then is secured by the Lock Nut.
Reply
I have the CFR 100. When my pump came on this morning it blew this lock nut apart. The system is at least 10 years old...probably closer to 20. Anyway, there is an O-Ring on the body, but I do not see any other gasket in the cover or the body. Is the lock Nut all that I need to get the unit back on line?
Thanks.
FM
Reply
As long as this is the only item damaged then that is all you would need. Please inspect the lid, and the body for any cracks. You may also want be sure that that lid o-ring is not stretched, cracking or bleeding. Lastly please make sure that the system is set up correctly by gallons per minute ratings between the pump and filter. If the pump is too strong for the filter, that potentialy could have caused that ring to be blown off.
Reply
Does this Lock Nut fits with Jacuzzi CFR Cartidge Filter 150 square feet?
Thanks!
Reply
Hi Joseph. According to the Jacuzzi Bros site this is the replacement nut for the CFR 50, 75 and 150. Thank you for the inquiry.
Reply
Will this lock nut fit my Landslide LS 70 filter and does it come with the lock tab that is yellow in your description? Mine is a black tab.Thanks, Tom
Reply
Hello Tom- Yes the Lock Nut (jacuzzi Filters) (42285007r000) 4666-10 will fit your Jacuzzi Landslide, and as mentioned in the description it does include the yellow tab.
Reply
The Most Helpful Review
1 0
(5 out of 5 stars) So Happy I found this Ring Lok-nut
Reviewed By: Michelle S. from Cambridge, NY ()
Exact fit needed for an emergency repair. Was very worried I wouldn't be able to find the part needed for a circa 1995 pool filter
Was this review helpful to you?
The Most Recent Reviews
(5 out of 5 stars)
Reviewed By: Albert Y. from Pico Rivera , CA ()
correct part, correct fit, all info on web site is correct,buying was a breeze and got it on time.....
Was this review helpful to you?