By Century Motors
Part # B122
Dimensions 14.5" L x 5.5" W x 5.5" D
MAGNETEK KEYED SHAFT 56C FRAME CATALOG # B122 PART # 7-164299-23 ..... HORSEPOWER LABEL HORSEPOWER: 1.0 SERVICE FACTOR: 1.4 EFFECTIVE HORSEPOWER: 1.4 ..... DIMENSIONS LENGTH: 9 1/2" EXCLUDING SHAFT SHAFT LENGTH: 2" DIAMETER: 6 1/2" MOUNTING HOLES: (4) 5 7/8" CENTER TO CENTER ..... CAPACITOR RUN CAPACITOR, 25 MF, 370 VOLTS, SINGLE PHASE MOUNTING ON TOP OF MOTOR (OPT# 5270-08) ..... ELECTRICAL VOLTAGE: 115/230 VOLTS, SINGLE PHASE AMP DRAW: 14.4/7.2 14.4 AT 115 VOLTS 7.2 AT 230 VOLTS SHIPPING WEIGHT: 24.50 LBS
Note: NOT California or New York Title 20 Compliant.
Compliant and New York Options: None; replace the whole pump with Compliant Variable Speed
What is Service Factor?
Reply
Service Factor(SF) is a multiplier that when multiplied by the horsepower of the motor indicates the total permissible horsepower loading that may be carried when the motor is operating at rated voltage and frequency. The most important thing to remember when replacing a motor is that the replacement motor's horsepower times its service factor must be equal to or greater than the original motor's horsepower times its service factor. The Service Factor rating can be found on the motor label. See Step 4 of our How to Read a Pool Motor Label guide.
Reply
Why do I need to purchase a new shaft seal?
Reply
We strongly recommend replacing the shaft seal. The purpose of a shaft seal is to prevent water from running down the shaft of the motor and into the motor housing. Water will damage the bearings and cause the motor to fail. A new shaft seal should be installed whenever a motor is replaced. The motor manufacturer can deny the warranty if the motor fails to due to water damage from a faulty shaft seal. To find your shaft seal you will need to visit our Pool Pump Parts Page or the Spa Pump Parts Page and select your make and model.
Reply
Why should I purchase a Tune Up Kit?
Reply
A Tune Up Kit includes all of the essential replacement seals and gaskets for the pump. The seals and gaskets should be replaced when installing a new motor on your pump. New seals will prevent the pump from leaking water or losing the prime. A Tune Up Kit will protect your motor and ensure that the pump is working efficiently.
Reply
I'm trying to replace the motor on my pool pump but all these numbers and abbreviations on the motor label are really confusing me. What do they mean?
Reply
Replacing a pool pump motor is not as difficult as it seems. You can try looking here. If you need help figuring out what the information on your label means. If you are still having difficulty figuring it out you can call us at our toll free number or you can send us a photo of your motor label here.
Reply
In your Alternate Parts you list a 7-164299-23 and a 8-164299-20 I have a 8-164299-23 is this OK?
Reply
Jim, The 1 Hp Full Rated Keyed 56C Motor will be the correct replacement for p/n 8-164299-23.
Reply
