By Waterway
Part # 5266BX
Warranty 1 Year
Manufacturer Code BN50V1
Dimensions 12" L x 8.5" W x 5.5" D
Alternate Part #'s 1-184843-03, 10-177803-02, 10-184843-02, 165744, 177803, 1778030J, 181458, 184167, 184843, 186268, 186276, 3051260, 3420610, 7-165744-01, 7-177803-01, 7-177803-02, 7-181458-01, 7-181458-02, 7-181458-82, 7-184167-02, 7-184843-01, 7-184843-02, 7-184843-03, 717780302, BN50, BN50V1, C1325, C48A21A24, C48A47A79, C48B21A01, C48M2A16, C48M2A161A1, C48M2A16A1, C48M2A16A2, C48M2A16A3, C48M2A16A4, MGT605144, S48M2A3, SP1515Z24E, SP1515Z24EBK, SP1515Z2E, TBS1152V1, 35-126-1115, AOSBN50V1, CRMBN50V1, MGT-60-0050
CENTURY-THRU BOLT-48 FRAME-2 SPEED CATALOG # BN50 PART # 7-177803-02 ..... HORSEPOWER LABEL HORSEPOWER: 1.5-.25 SERVICE FACTOR: 1.0 EFFECTIVE HORSEPOWER: HIGH SPEED: 1.5 LOW SPEED: .25 ..... DIMENSIONS LENGTH: 10 1/2" EXCLUDING SHAFT SHAFT LENGTH: 2 1/4" DIAMETER: 5 5/8" ..... CAPACITOR START CAPACITOR: 108-130 MFD 110 VAC MOUNTED ON BACK SIDE OF MOTOR (OPT# 5270-10) ..... ELECTRICAL VOLTAGE: 115 VOLTS SINGLE PHASE AMP DRAW: 16.4/4.4 ..... SHIPPING WEIGHT 25.85 LBS ..... INCLUDES STAND WELDED ON MOTOR & HAS A PLASTIC BACK COVER. (4) THRU BOLTS 9 1/8" LONG.
Note: NOT California Title 20 Compliant.
What is Service Factor?
Reply
Service Factor(SF) is a multiplier that when multiplied by the horsepower of the motor indicates the total permissible horsepower loading that may be carried when the motor is operating at rated voltage and frequency. The most important thing to remember when replacing a motor is that the replacement motor's horsepower times its service factor must be equal to or greater than the original motor's horsepower times its service factor. The Service Factor rating can be found on the motor label. See Step 4 of our How to Read a Pool Motor Label guide.
Reply
I have a megetek century lasar pump 1081/1563 duty 10-177803-02 bn50 two speed it says 115 volts on it but its running on 230 volts how is that ? and what replacement motor or pump do I need ? water way filter side discharge pump
Reply
Hi Bob, We show you need the BN50 Replacement Motor which is the exact motor you have now. This is a 115V replacement motor, you may want to take a voltmeter to measure your incoming voltage to the motor to confirm your voltage.
Reply
I have a Century LASAR A.O. Smith BN50 7-177803-02 motor with capacitor mounted in rear of motor. Your have two different photos, one with capacitor on top and one with it mounted in the rear. How can I make sure I order the right one?
Hi, John. This motor will ship with the external capacitor.
Reply
I have Century AC Motor A.O. SMITH BX6-17 that just goes bad. Do you think this motor is compatible in term of physical size and specifications?
Note: We can accept <2.0 HP and <1745RMP
Hi, Ethan. Unfortunately, this motor will not work. We do not have a suitable replacement for your motor.
Reply
