Part # 4010-0
Manufacturer Code 50W1051
Alternate Part #'s 50B1051, 50W1051, 50-252-1051
Skimmer, Baker Hydro - Gunite Deluxe - 50W1051
What is the opening size. I will need for fiberglass pool
Reply
The dimensions of the Skimmer, Baker Hydro - Gunite Deluxe (50b1051) 4010-0 are 23 5/8"H x 11 1/4"W 17"D, 9 1/2"x 6 5/16" ID. That is for the gunite skimmer. The one you would need for your pool is the Skimmer, Baker Hydro - Vinyl Deluxe (50b1006) 4010-1.
Reply
I am trying to replace baker hydro skimmer and I need to know the throat length. My old one is L 6 1/2", H 6", W 8 1/2". The width (round part) is 10" H 23". Thank you in advance for your help.
Reply
Hi Robert, These are the dimensions for this skimmer: HEIGHT: 23 5/8” THROAT: 9 1/2” X 6 5/16” INSIDE FRONT TO BACK: 17” MAXIMUM WIDTH: 11 1/4”.
Reply
Does this part come as a complete unit with faceplate and gasket, If not are they available separately?
Reply
Hi. This skimmer does not come with any gaskets or faceplate. This model does not require any.
Reply
I want to buy the following Skimmer, Baker Hydro - Gunite Deluxe (50b1051) - 50W1051 but I want to make sure it's the same one aside the one I have in my inground pool. I found p/no 50-000-103 on the shell of this Baker Hydro. It a Dimond Brite finish.
Reply
Yes, that should be the correct replacement. Unfortunately the 50-000-103 you found on the housing is not a # that can be referenced as the housing is not sold as it's own part. We are not able to confirm info on the Diamond Brite finish.
Reply
