By Perma-Cast
Part # 6020-0
Manufacturer Code PF-3119-A
Alternate Part #'s PF3119A, 62-217-1002, PERPF3119A, PMCPF3119A
INYO # 6020-0 PERMA-CAST # PF-3119-A
************************************************
GENERAL DESCRIPTION: THIS IS A ROUND FLANGE WHICH MOUNTS ON TOP OF THE DECK USED FOR A RAIL OR LADDER WITH A RAIL OUTSIDE DIAMETER OF 1.9" (1-7/8" APPROXIMATELY) THIS INCLUDES THE LEAD ANCHORS AND BOLTS TO ATTACH THE FLANGE TO CONCRETE THIS IS USUALLY USED FOR INGROUND LADDERS, RAILS, AND SLIDES
************************************************
DETAILED DESCRIPTION: MATERIAL: ALUMINUM FLANGE, STAINLESS STEEL BOLTS, LEAD ANCHORS COLOR: WHITE SHAPE: ROUND, WITH A FLAT FLANGE ON THE BOTTOM THE FLANGE HAS 4 MOUNTING HOLES THERE IS A HOLE IN THE UPPER FLANGE BODY WITH THE CENTER OF THE HOLE AT 7/8" FROM THE TOP THIS IS FOR THE BOLT WHICH HOLDS THE RAIL IN PLACE
************************************************
DIMENSIONS: OUTSIDE DIAMETER: 5-1/4" (BOTTOM MOUNTING FLANGE) OUTSIDE DIAMETER: 2-3/8" (TOP OF FLANGE) INSIDE DIAMETER: 1-15/16"(TOP INSIDE) HEIGHT: 3-1/8" MOUNTING HOLES: THERE ARE A TOTAL OF 4 MOUNTING HOLES EVENLY SPACED ON THE FLANGE BOTTOM THE CENTER TO CENTER MEASUREMENT FROM ON HOLE TO ANOTHER IS 4-3/16"
************************************************
INCLUDES: MOUNTING FLANGE BOLT, NUT, AND WASHERS TO HOLD RAIL IN PLACE (4) LEAD ANCHORS WITH BOLTS AND WASHERS TO ATTACH FLANGE TO CONCRETE
Does this deck flange have the hole in the bottom of the flange the 1 15/16" ? My existing ones are plastic and the hole is on the bottom of the flange. This allows me to slide the new flange over the existing leg. Then mount to concrete with the 4 outside anchors.
Reply
Hello Steve, I researched this Slide Flange and found no indication there is a hole in the center bottom. The Flange is designed to be anchored to the deck, the rail dropped in the center, and then a bolt through the rail to secure it to the flange.
Reply
I WANT TO INSTALL NEW NADRAILS IN MY POOL AND SPA USING THIS FLANGE. ONE FLANGE WILL NEED TO MOUNT ON A CONCRETE STEP INSIDE THE POOL. THE OTHER WILL MOUNT ON A FLAGSTONE DECK. I AM MOST CONBCERNED ABOUT THE IN POOL MOUNT. WHAT FASTENERS WOULD BE BEST TO USE IN THE POOL/UNDER WATER, MOUNTED ON A CONCRETE STEP?
Reply
Hi, Tim. There isn't any special anchors or bolts used with this anchor for an in pool installation. The anchors and bolts that come with this flange are for a concrete installation.
Reply
